Leaderboard

Recommend use with AIRAC 2506 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (June 2025) Update: adjustments in RAD and Directs to ensure correct/better routing - e.g.: London Heathrow arrivals via London Control WEST Free Route Airspace Note Due to implementation of real-world special RAD rules for 2025 summer season, PFPX may take a few seconds longer to find a route for certain European city-pairs. Affected regions to deconflict traffic flows: Southeastern Germany, Belgium and Hungary. Best regards David

Recommend use with AIRAC 2505 for best results. Updates for RAD Restrictions and Directs are cumulative. Changelog Update: Route and Altitude/FL Restrictions Update: RouteCharges (May 2025) Update: RestrictiveAirspaceProperties.xml Note Due to implementation of real-world special RAD rules for 2025 summer season, PFPX may take a few seconds longer to find a route for certain European city-pairs. Affected regions to deconflict traffic flows: Southeastern Germany, Belgium and Hungary. Best regards David

ENGLISH: This is St. Peter Ording (EDXO) for X-Plane 12 Update May 2025: The airfield has been expanded in recent years. The apron was extended to accommodate a larger refueling station and a third taxiway to the runway was created. I built the airfield as a pure library based airfield with the World Editor (WED) The buildings and objects are all used from different libraries and thus do not conform 100% reality. But all objects are in the right places and are as close to reality as possible with library objects. Furthermore, I have tried to give the airport a "real" look. Installation: Please delete an older version. Just copy the (extracted) airfield folder "AIRFIELD-EDXO-St-Peter-Ording-XP12..." into the Custom Scenery folder and start X-Plane 12. In the scenery_packs.ini the entries should be entered in the upper range (at the airports). The scenery_packs.ini file you find in the Custom Scenery folder and you can edit it with a simple editor (close X-Plane 12 before): Required for a correct representation are the following libraries, installed in the Custom Scenery folder: OpenSceneryX R2_Library ruscenery 3D people_library ff_library_extended_LOD the handy objects Library CDB-Library All Libraries you find here: https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/ The airfield is freeware and may not be available through other locations (websites, etc ...) without my permission. Links to this download area here in the Aerosoft Forum are allowed. Please send me a appropriate info. Many thanks. Have fun with the airfield.... Greets Heinz Flichtbeil May 2025 ------------------------------------------------------ GERMAN: Dies ist St. Peter Ording (EDXO) für X-Plane 12 Update Mai 2025: Der Flugplatz wurde in den letzten Jahren erweitert. Es wurde der Apron für eine größere Tankstation erweitert und es wurde ein dritter Taxiway zur Runway geschaffen. Ich habe den Flugplatz als reinen Baukastenflugplatz mit Hilfe des World Editor (WED) gebaut. Die Gebäude und Objekte stammen alle aus verschiedenen Libraries und entsprechen somit nicht 100%ig der Realität. Sie befinden sich aber an den richtigen Plätzen und sind so nahe an der Realität, wie mit Library Objekten möglich. Weiterhin habe ich mich bemüht, dem Flugplatz ein "reales" Flair zu verleihen, passend zum neuen "Outfit". Installation: Falls eine Vorversion vorhanden ist, diese bitte löschen. Einfach den entpackten Airfield Ordner "AIRFIELD-EDXO-St-Peter-Ording-XP12..." in den Custom Scenery Ordner kopieren und X-Plane 12 starten! In der Datei scenery_packs.ini sollten er im oberen Bereich (bei den Airports) eingetragen sein. Die scenery_packs.ini Datei befindet sich im Custom Scenery Ordner und kann mit einem einfachen Editor bearbeitet werden (X-Plane 12 vorher schließen): Voraussetzung für eine korrekte Darstellung sind folgende im Custom Scenery Ordner installierte, aktuelle!! Libraries: OpenSceneryX R2_Library ruscenery 3D people_library ff_library_extended_LOD the handy objects Library CDB-Library Alle Libraries sind hier zu finden: https://forums.x-plane.org/index.php?/forums/topic/90776-master-list-of-libraries/ Der Flugplatz ist Freeware und darf ohne meine Erlaubnis nicht über andere Wege (WebSites usw...) angeboten werden. Links zu diesem Downloadbereich hier im Aerosoft Forum sind erlaubt. Bitte sendet mir dann eine entsprechende Info. Vielen Dank. Viel Spaß mit dem Flugplatz. Heinz Flichtbeil / Mai 2025 ----------------------------------- Credits: Many Thanks to all Library Authors, Object Developers, Ben Supnik (World Editor), uwespeed (European Vehicles). JB_Hangars (Jacques Brault), Helicopter (Planebuilder).

This package upgrades the default LOWI Innsbruck airport scenery area coming with X-Plane 12. The package is non-invasive so it does not mess around with any XP files, further this package is simplified for easier installation compared to the XP11 version. Just drop it into your Custom Scenery folder and that's it. Authors: Agi Schwalm Features: High resolution and color optimized orthophoto (60cm/pixel) covering the airfields surroundings (reworked for XP12) Orthophoto normal maps for additional details High definition vegetation including grass, flowers and bushes (reworked for XP12) Uses natvie XP12 real 3D bushes and trees Custom ground textures (reworked for XP12) Seasons (native XP12, no plugin required) Native XP12 weather effects for the custom ground textures Installation: Copy folder „FlyAgi - LOWI Innsbruck“ from the zip file into your Custom Scenery folder

This package enhances the default or Bahrometrix airfield EDRN Nannhausen. You can find a guide on how to get and install Bahrometrix buildings into this scenery in the documents folder. Authors: Agi Schwalm Features: Animated wind turbines (reworked for XP12) High resolution and color optimized orthophoto (60cm/pixel) covering the airfields surroundings (reworked for XP12) High definition vegetation including grass, flowers and bushes (reworked for XP12) Uses native XP12 real 3D vegetation for bushes and trees Custom ground textures Full seasons support (XP12 native, no plugin required) XP12 native weather effects such as rain, snow and ice on the paved ground Customized road networks around the airfield Installation: Copy folder „FlyAgi – EDRN Nannhausen“ into your Custom Scenery folder For Bahrometrix objects installation you can find a guide inside the scenery's documentation folder

This scenery is a detailed recreation of EDDK Köln-Bonn airport. Authors: Cedric Gauche Georg Aubele Agi Schwalm Features: Custom modelled EDDK Köln-Bonn airport High resolution and color optimized orthophoto (30cm/pixel) covering the airport’s surroundings (reworked for XP12) Orthophoto normal maps for additional details High definition vegetation including grass, flowers and bushes (reworked for XP12) Vulkan-ready ground traffic Animated jetways (XP12 native), VDGS and marshallers (SAM plugin required) Custom ground textures including XP12 weather effects Seasons (XP12 native, no plugins required) Wet surface and snow effects (XP12 native) Reworked road networks Installation: Unpack zip file Copy folders „FlyAgi – EDDK Cologne-Bonn" into your Custom Scenery folder

Overlays for use with my wind turbines library. You can find the library here: Currently included: NRW (handcrafted) Europe Installation: Unpack zip file Copy folders „FlyAgi - Wind Turbines - 1 - Overlay NRW“ and „FlyAgi - Wind Turbines - 2 - Overlay Europe“ into your Custom Scenery folder Make sure that the NRW entry is above the Europe entry in your scenery_packs.ini

My wind turbines library optimized for X-Plane 12. You will need overlay or sceneries that make use of the library to actually see wind turbines in your simulator. You can find Overlays for Europe here: Changes for XP12 compatibility: Changed Datarefs Fixed wrong wind speed dependent behaviour Fixed rare bug when negative wind speed is reported by X-Plane Features: Plain white and red striped wind turbines Sizes 25, 50, 75, 100, 125 and 150 meters With or without obstacle lights Off-shore and on-shore versions Fully animated (rotation, wind direction) Rotation starts and stops realistically (rotation from 4 to 45 kts wind speed) Rotation is desynchronized Rotation speed depends on wind speed (SAM plugin required) Installation: Unpack zip file Copy folder „FlyAgi - Wind Turbines - 0 - Library“ into your Custom Scenery folder

Fellow turboprop flyers - attached are the config files I wrote to use the Honeycomb Bravo/Alpha with the Carenado Cessna 208 Caravan. All LEDs should work nearly as expected in coordination with the aircraft's. Obviously you will need to tweak/customize to your individual setup. Hopefully this saves you some time. Notes: -Throttle lever 4 detent is mapped to feather prop, you’ll likely need to tweak default response curve for more realistic functionality. -Throttle lever 5 detent is mapped to cut fuel, same deal as above - you'll need custom response curves. (E.g., shut down engine only when condition lever in detent, not merely when the lever is on the aft stop.) -Am still working on a LUA script to be able to use map the emergency power lever to an axis...more to follow. Cheers, -Charlie