Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/17/21 in all areas

  1. Ab morgen läuft die Erzeugung der X-Europe v5.4, neben den Objekten die nun neu innerhalb von Servicestraßen generiert werden, hab ich noch die Flaggen geändert, damit sie aus der richtigen Windrichtung wehen, sowie bei den Kühltürmen 4 verschiedene Größen eingeführt. So sieht das dann aus: Auf dem letzten Bild sieht man schön die unterschiedlichen Größen und wie gut das passt 😊
    3 points
  2. Ich hab das mal gemacht und die Kühltürme angepasst:
    2 points
  3. Version 1.0.0

    664 downloads

    TURKISH AIRLINES CARGO TC-JOY enjoy
    1 point
  4. Please enable experimental updates. And install 1.0.3.2
    1 point
  5. Maybe you will be surprised Pavel,and your sceneries will be ready soon for MSFS 😉 Rado
    1 point
  6. Hi guys: Ted, You'd have to watch out for "Honeycomb Bridge Module" in task manager. Glad to read that solved it for you, Rahel! Yes please do and let us know if that fixed it for you, too.
    1 point
  7. Hallo Kai. Das sind keine Avatare, das sind animierte Personen ohne weitere Funktion. Bis auf die Ausnahme, dass sie so programmiert sind, dass sie auf die Tages/Jahreszeit, Wetter etc reagieren. Die Avatar Technik ist etwas anderes. Zwar nicht komplett anders, aber es gibt große Unterschiede: Einfach animierte Personen mit einem einfach aufgebauten Knochen System Aufwendige Avatar-Technologie mit einer Nachbildung des menschlichen Skelett (Biped), dazu später hier mehr Ich hatte schon mal überlegt so etwas wie einen Service anzubieten, so
    1 point
  8. It seems, that the content in the MSFS 2020 marketplace is not updated in time. In some cases it might take to 6 weeks, I am told. Disgusted by noticing that here on Aerosoft the La Gomera Airport had been updated and not in Marketplace, I bought it here and installed it. The La Gomera Airport scenery now works without any problems! So, it is not your scenery, but Asobo's fault.
    1 point
  9. I looked at what was starting up in Task Manager and it does not list AFC-Bridge starting up ...Even after applying a manual start of the application as described in my original post ... BUT the lights do work after manually starting the app
    1 point
  10. Bravo Throttle Light INOP I have found if I load the sim and set up a flight the lights don’t work on the Throttle … SO while the sim is still active I open my community folder and open the AFC-Bridge folder THEN I open the bin folder and click on the AFC_Bridge Application …This kick the application into working …I then close the open flight in the sim and start a new flight and the lights then come on …YIPPEE …I have to do this every time I boot up MSFS but once it is up and running for the day the lights stay working until the next time …I created a shortcut to the Community folder on my
    1 point
  11. Blender ist schon schwerer Tobak. Mir fällt das Einarbeiten bei solchen (abstrakten) Sachen auch immer sehr schwer. Bin einfach zu ungeduldig, man muss sich aber darauf einlassen. Mal sehen, was wird. Jedenfalls bin ich erst einmal happy. Habe gleich mal den Tipp von Armin aufgegriffen und die Neurath-Kühlertürme in 1-vfr ergänzt. Leute, was haben wir für Möglichkeiten!!
    1 point
  12. Neue Version 1.3 Das Einschalten des Slewmode während des Fluges konnte zu merkwürdigen Situationen führen, es konnte sogar zu einem Absturz bei der Landung kommen. Die neue Version enthält einen Notschalter, der sicherstellt, dass der Slewmode während des Fluges nicht aktiviert werden kann (wird deaktiviert). Zur besseren Kommunikation mit dem Piloten werden für ca. 10 Sekunden Meldungen auf dem Bildschirm angezeigt. Für die Anzeige wird das mitgelieferte Modul mbox.lua benötigt. Diese Datei muss in den Modulordn
    1 point
  13. Hi Pete, I've just moved your post into the correct subsection of the forum. In the first models of the Bravo the "VS" button was labelled "CRS". But it is physically the same button.
    1 point
  14. Thanks Rahal: can you confirm that "G:\MSFS 2020\community\AFC_Bridge\bin\" is actually the path, where the file AFC_Bridge.exe is located? If yes, please start up MSFS and wait until the sim has loaded into main menu. Now, In task manager, do you find the process "Honeycomb Bridge Module" is running? Can also be hidden under the Flight Simulator process itself.
    1 point
  15. Good morning! That I can say about this. I will only order MFS 2020 today. I opted for the Deluxe version, which can be purchased through Steam. MFS download version, not boxed. Why didn't I order MFS for so long? Working in Bratislava, I had a crazy daily rhythm of work, on average 8 hours a day for seven months. I had no time for MFS 2020 Next week, I will start looking into exporting my projects to MFS. Naturally, like everything new, it will be a trial and error path. But two years ago, Prepar3D was also new to me It is difficult to predict now, but I plan
    1 point
  16. Hi Rahal, please grab the file "exe.xml" from "C:\Users\{UserName}\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache" and attach it to this thread, so I can take a look as to whether the driver application is supposed to start.
    1 point
  17. Good morning, I hope you are doing well too! I guarantee that all emails received until yesterday have already been answered. Could you please check your spam folder? If you don't find an email there either, please write an email to me directly and I will take care of it immediately on monday! My address: marius.ellenbuerger@aerosoft.com Greetings, Marius
    1 point
  18. They have said that they are providing review units to serious major Twitch/Youtube personalities so I assume that FSElite and others will also get in on the fun!
    1 point
  19. Hi, please try downloading and installing the Visual Studio 2019 runtimes. This should possibly fix that error.
    1 point
  20. I assume that some major updates will have to occur before we see the CRJ based on everything we know so far, so I don't expect anything before Sim Update 3 at the earliest. Anything is possible and a short delay may turn into months or even years. If you aren't in software development sometimes it seems like developers are able to be very accurate with release schedules, but since software development is ultimately a human endeavor it's always in flux.
    1 point
  21. Just finished modelling the new government terminal and surroundings, now smaller stuff like the new Terminal 2, new parking garages etc. is in the works. Doesn't make much sense to show screenshots from outside MSFS at the moment. As soon as there's something to show in-sim, we will post new screenshots here. Bests, Sascha
    1 point
  22. Hi Joe, what we will have ready in the next version is having the possibility to increase the speed of the repeat function. With this, it will be possible to get at least a slightly faster response while turning the increase/decrease knob. Meaning if you only turn it one notch, you get 1 increment, but if you continue to turn it within a certain time frame you get a higher rate of increments. Maybe this will already solve it for you.
    1 point
  23. Good comments. Like TheDude I am not a fan of making PC simulation more than it actually is. We use real pilots to assist us in the development of products. And each of them knows that there is simply no add-on that a real pilot would call 'study-level'. It's a term that popped up a few years ago for no good reason. I do not think I ever seen a development team use the term, it's always customers. There is one PMDG product a lot of pilots speak of with great respect about because it was pretty damned accurate if you combined two non standard things (or failures). And that is extr
    1 point
  24. Hello, I've had a little look at the Honeycomb hardware (Alpha Yoke and Bravo Throttle) and especially the Honeycomb Configurator (HC) tool. Please post new Question in this Subforum with a new Topic. The Honeycomb Configurator is available here: https://forum.aerosoft.com/index.php?/files/category/126-honeycomb-profiles/ And there are also informative video tutorials about the Honeycomb Configurator (HC). https://www.youtube.com/watch?v=BABKIVwr7xc&list=PL-CM2J7huv9GsJLInEaXS71CKKU_5g3Sl&index=7 The Alpha Yoke is easy to c
    1 point
  25. Okay, we feel your frustration. But the actual story is a bit more complex. The simple fact is we did not get what we were expecting on the scheduled date. We got a delivery late on December 17th. we shipped as much as we could on the 18th (do note that is a Friday and let me tell you every loose hand in the company was in the warehouse to make that happen, nobody went home until the last truck drove off). On the weekend we were willing to work but no shipping agent is picking up packages, so we had could only start to ship to our distributors on that day. And yes, Corona and Chris
    1 point
  26. Version 1.1

    184 downloads

    Here is a MASTER for the A330 that I made, several modifications will be made!
    1 point
  27. Not sure what your intention of this post is. Same applies to Munich where Terminal 1 is being currently closed now. Do you expect that the devs take care of every possible change happening on an aiprort every few month by adding multiple opotions to remove/add this and that? Sorry, but this will definitely not happen.
    1 point
  28. Hopefully this will help someone who owns the CRJ Pro and is trying to use the included tutorial flight that is installed as a scenario in your "Prepar3D v5 Files" directory when the CRJ Pro is installed. The tutorial PDF, "Vol3-Tutorial.pdf" refers to this loadable scenario. If you try to load the tutorial scenario you'll get an error along the lines of "Unable to initialize CRJ700ER American Eagle N508AE. You will now be placed into visualization mode." Apparently, this is happening because the scenario is looking for the CRJ700 aircraft under the name used with the non-pro vers
    1 point
  29. If you want to use the forum event calendar to announce your flight and to find a crew member follow these guidelines. Date/Time The time is a bit tricky, when you make the entry you use the 24-hour clock, unfortunately, the calendar will show the time in AM/PM. In any case, make sure you use ZULU (GMT) time. A good website to calculate timezones is here . Time Zone Make sure you set the calendar to GMT+0 Title The most important. State the Departure and Arrival airport and the aircraft type Description Always start with the voice channel you are going to
    1 point
  30. 516 downloads

    Small video showing the advanced features of the H-36 Dimona
    1 point


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...