Recently we have seen a lot of codes used to unlock our products being offered for discounted prices. Almost all of them are bought using stolen credit cards. These codes will all be blocked by our systems and you will have to try to get your money back from the seller, we are unable to assist in these matters. Do be very careful when you see a deal that is almost too good to be true, it probably is too good to be true.

Jump to content
Matt_Smith

How to get Aerosoft products working in Prepar3D

Recommended Posts

For this guide I am assuming you know how to manually add scenery to the Prepar3D scenery library. You will need to manually add each product to the scenery library in Perpar3D. All the following has been tested and confirmed to work on a clean install of Prepar3D without errors. If you come across any errors check to make sure you have fully followed the instructions and copied all files across to the correct locations. Where installers have asked if you would like to install static aircraft I have always answered no, as I prefer to have AI fill the parking spots on the aprons, so these static aircraft wont be included in the instruction.I wont be taking requests for which products to write instructions for as I can only work through the ones I own. So to kick this thread off I will start with the A's. More will be added as and when I get the time to. For denonstration purposes Ive use \\fsx and \\P3D as my installation paths. Obviously you will need to substitute those with the correct paths for your system.

Athens

\\fsx\aerosoft\Mega Airport Athen_LC

to

\\P3D\aerosoft\Mega Airport Athen_LC

\\fsx\aerosoft\Mega Airport Athen_SC

to

\\P3D\aerosoft\Mega Airport Athen_SC

\\fsx\Texture Copy the following file:

Ruff269.dds

to

\\P3D\Texture

When adding Mega Airport Athen_LC and Mega Airport Athen_SC to the Perpar3D scenery library ensure Mega Airport Athen_SC is above Mega Airport Athen_LC.

Antarctica X

Assuming you have the scenery installed and activated via the launcher you will need to copy the following files and folders:

\\fsx\aerosoft\Antarctica x

to

\\P3D\aerosoft\Antarctica x

\\fsx\Effects the following files need copying:

LimeSim_AntarcticaX_Compressor.fx

LimeSim_AntarcticaX_EngineDiesel.fx

LimeSim_AntarcticaX_Exhaust.fx

LimeSim_AntarcticaX_FuelPump01.fx

LimeSim_AntarcticaX_light_white.fx

LimeSim_AntarcticaX_light_white_Cntl.fx

LimeSim_AntarcticaX_MountErebus.fx

LimeSim_AntarcticaX_MountErebus_Cntl.fx

LimeSim_AntarcticaX_MountErebusSub.fx

LimeSim_AntarcticaX_MountErebusSub_Cntl.fx

LimeSim_AntarcticaX_RotheraRwyLight01.fx

LimeSim_AntarcticaX_ShipSmoke01.fx

LimeSim_AntarcticaX_ShipTurbine01.fx

LimeSim_AntarcticaX_Smoke.fx

LimeSim_AntarcticaX_SnowBlower.fx

LimeSim_AntarcticaX_Wind01.fx

LimeSim_AntarcticaX_Wind02.fx

LimeSim_Churchbells.fx

to

\\P3D\Effects

\\fsx\SimObjects\Airplanes\Aerosoft Twin Otter 300 Wheel Ski (Antarctica)

to

\\P3D\SimObjects\Airplanes\Aerosoft Twin Otter 300 Wheel Ski (Antarctica)

\\fsx\SimObjects\Boats\AntarcticaX_BoatInflatable

to

\\P3D\SimObjects\Boats\AntarcticaX_BoatInflatable

\\fsx\SimObjects\Boats\AntarcticaX_Icebreaker

to

\\P3D\SimObjects\Boats\AntarcticaX_Icebreaker

\\fsx\SimObjects\Boats\AntarcticaX_Polarstern

to

\\P3D\SimObjects\Boats\AntarcticaX_Polarstern

\\fsx\SimObjects\Boats\AntarcticaX_USCGCHealy

to

\\P3D\SimObjects\Boats\AntarcticaX_USCGCHealy

\\fsx\Sound copy the following files:

Aerosoft_Aircon_x3.wav

Aerosoft_Aircon_x3k.wav

Aerosoft_churchbells_loop.wav

Aerosoft_compressor_loop.wav

Aerosoft_compressor_loop_005.wav

Aerosoft_engine_diesel_loop_x3.wav

LimeSim_AntarcticaX_ShipTurbine01.wav

LimeSim_AntarcticaX_Wind01.wav

to

\\P3D\Sound

Now in Perpar3D add the Antarctica folder in P3D\aerosoft to your scenery library.

Aspen X

Copy the following folders

\\fsx\Aerosoft\AspenKase

to

\\P3D\Aerosoft\AspenKase

\\fsx\Aerosoft\AspenX

to

\\P3D\Aerosoft\AspenX

Now add AspenX and AspenKase folders located in P3D\aerosoft to the Prepar3D scenery library. You will need to make sure you add AspenKase between Default Scenery and Default Terrain.

post-26298-0-56828600-1338307213_thumb.j

Antalya X

copy the following files and folders

\\fsx\Aerosoft\Antalya X

to

\\P3D\Aerosoft\Antalya X

\\fsx\Effects copy the following files:

Aerosoft_LTAI_dust_l.fx

Aerosoft_LTAI_dust_s.fx

Aerosoft_LTAI_I_RED.fx

Aerosoft_LTAI_I_white.fx

Aerosoft_LTAI_WaterFall.fx

Aerosoft_LTAI_WaterFall_splash.fx

to

\\P3D\Effects

Now in Perpar3D add the Antalya folder in P3D\aerosoft to your scenery library.

Note: I didnt bother copying across the VistaMare folder and files as VistaMare doesnt work with P3D. This just means you wont get any AESLite functionality. To save repeating myself, this will be the case with all scenery that has AESLite.

Andras Field

Copy the following files and folders

\\fsx\Aerosoft\Andras Field

to

\\P3D\Aerosoft\Andras Field

\\fsx\Effects copy the following files:

andras_dance.fx

andras_dog.fx

andras_fight.fx

andras_fountain.fx

andras_hangar.fx

andras_lamp.fx

andras_lg.fx

andras_red.fx

andras_wakebow.fx

andras_waterfall.fx

andras_wbu.fx

andras_yl.fx

to

\\P3D\Effects

\\fsx\Effects exture copy the follwing files:

andras_lights.bmp

andras_splash.bmp

to

\\P3D\Effects exture

\\fsx\SimObjects\Airplanes\C172

to

\\P3D\SimObjects\Airplanes\C172

E:\fsx\Sound copy the following files:

Aerosoft_engine_diesel_loop.wav

andras_dance.wav

andras_dog.wav

andras_fight.wav

andras_hangar.wav

andras_laughter.wav

andras_laughter2.wav

to

\\P3D\Sound

Now in Perpar3D add the Andras Field folder in P3D\aerosoft to your scenery library.

Anchorage X

\\fsx\aerosoft\Anchorage-Airport

to

\\P3D\aerosoft\Anchorage-Airport

\\fsx\aerosoft\Anchorage-Terrain

to

\\P3D\aerosoft\Anchorage-Terrain

Note: When adding to the scenery library, make sure -Airport is above -Terrain.

\\fsx\Effects copy the following files:

fx_simwings_PANC_apronlight1.fx

fx_simwings_PANC_apronlight1_control.fx

fx_simwings_PANC_apronlight2.fx

fx_simwings_PANC_apronlight2_control.fx

fx_simwings_PANC_streetlight.fx

fx_simwings_PANC_streetlight_control.fx

to

\\P3D\Effects

\\fsx\Effects exture copy the following files:

fx_simwings_apronlight1.bmp

fx_simwings_apronlight1side.bmp

fx_simwings_streetlight.bmp

to

\\P3D\Effects exture

\\fsx\Scenery\WORLD\SCENERY copy the following file:

AFX_PALH_ALT.bgl

to

\\P3D\Scenery\WORLD\SCENERY

\fsx\Sound\AES copy the following files:

AL-PANC-T1.wav

AL-PANC-T2.wav

AL-PANC-T3.wav

to

\\P3D\Sound\AES

Now in Perpar3D add the Anchorage-Airport and Anchorage-Terrain folders in P3D\aerosoft to your scenery library.

Airports of Mexico City & Central

\\fsx\FlyMex\FSXMEXC

to

\\P3D\FlyMex\FSXMEXC

\\\fsx\FlyMex\FSXMEXCLC

to

\\P3D\FlyMex\FSXMEXCLC

\\fsx\Scenery\Global\Texture copy the following files:

AG_AcaciaTree01.dds

AG_AcaciaTree01_lm.dds

gen_tropical_hotel1_trees.dds

treesconifer.dds

TreesNew.dds

treesSU2.dds

veg_Acacia1.dds

veg_acacia1_canopy_FA.dds

veg_acacia1_canopy_HW.dds

veg_acacia1_canopy_SP.dds

veg_acacia1_canopy_WI.dds

veg_acacia1_FA.dds

veg_acacia1_HW.dds

veg_acacia1_SP.dds

veg_acacia1_WI.dds

veg_eucalyptusGum.dds

veg_eucalyptusGum_canopy.dds

veg_Larch_and_BaldCypress_fa.dds

veg_Larch_and_BaldCypress_hw.dds

veg_Larch_and_BaldCypress_sp.dds

veg_Larch_and_BaldCypress_wi.dds

veg_OliveTree.dds

veg_OliveTree_canopy.dds

veg_RF1_side.dds

veg_RF1_UnderstoryCanopy.dds

veg_RF2_side.dds

veg_RF1_UnderstoryCanopy.dds

to

\\P3d\Scenery\Global\Texture

\\fsx\Scenery\NAMC\Scenery copy the following file:

DEMEXCITY

to

\\P3D\Scenery\NAMC\Scenery

\\fsx\Scenery\World\Scenery copy the following file:

Traffic_JJC.bgl

to

\\P3D\Scenery\World\Scenery

Now add FSXMEXC and FSXMEXCLC folders from P3D\FlyMex Perpar3D to the scenery library

Note: Make sure when adding to the scenery library FSXMEXC must be above FSXMEXCLC

African Airstrip Adventures

\\fsx\Aerosoft\African Airstrip Adventures

to

\\P3D\Aerosoft\African Airstrip Adventures

\\fsx\Effects copy the following files:

Aerosoft_AAA_Dirtspray.fx

Aerosoft_AAA_Fire_0.fx

Aerosoft_AAA_Fire_1.fx

Aerosoft_AAA_WaterFall.fx

SFX_Aerosoft_AAA-Flamingos.fx

to

\\P3D\Effects

\\fsx\Missions\Aerosoft Missions\African Airstrip Adventures

to

\\P3D\Missions\Aerosoft Missions\African Airstrip Adventures

\\fsx\Rewards Copy the following file:

Aerosoft_AAA_1.rwd

to

\\P3D\Rewards

\\\fsx\Scenery\World\Scenery copy the following files:

HK0G_ADE_FW_ALT.bgl

HKIS_ADE_FW_ALT.bgl

HKNV_ADE_FW_ALT.bgl

HKNY_ADE_FW_ALT.bgl

HKSB_ADE_FW_ALT.bgl

to

\\P3D\Scenery\World\Scenery

\\fsx\SimObjects\Airplanes\DH_Dash8_100

to

\\P3D\SimObjects\Airplanes\DH_Dash8_100

\\fsx\SimObjects\Airplanes\Maule_M7_260C

to

\\P3D\SimObjects\Airplanes\Maule_M7_260C

\\fsx\SimObjects\Rotorcraft\Robinson_R22

to

\\P3D\SimObjects\Rotorcraft\Robinson_R22

\\fsx\Sound copy the following file:

Aerosoft_AAA-Flamingos

to

\\P3D\Sound

Now add African Airstrip Adventures folder in P3D\aerosoft to the Prepar3D scenery library.

Note: I didnt bother copying the C208 AAA adds to sim objects as it requires the default FSX C208 to be present, which isn't packaged with P3D.

Share this post


Link to post

Part 2.

The Balearic Islands X instructions should work for the individual products if you purchased them separately for what ever reason.

Balearic Islands X

\\fsx\aerosoft\Ibiza X GROUND

to

\\P3D\aerosoft\Ibiza X GROUND

\\fsx\aerosoft\Ibiza X SC

to

\\P3D\aerosoft\Ibiza X SC

\\fsx\aerosoft\Ibiza X Utility

to

\\P3D\aerosoft\Ibiza X Utility

\\fsx\aerosoft\Mallorca X GROUND

to

\\P3D\aerosoft\Mallorca X GROUND

\\fsx\aerosoft\Mallorca X SC

to

\\P3D\aerosoft\Mallorca X SC

\\fsx\aerosoft\Menorca X Ground

to

\\P3D\aerosoft\Menorca X Ground

\\fsx\aerosoft\Menorca X SC

to

\\P3D\aerosoft\Menorca X SC

Add both the SC and Ground folders to your scenery library in Perpar3D making sure for for each airport the SC folder is above the Ground folder. Eg:

Ibiza X SC

Ibiza X Ground

The Ibiza X utility folder doesn't get added to the scenery library. As before theres no need to move the vistaMare folder across to Prepar3D.

BajaSim La Paz International X

\\fsx\Aerosoft\Bajasim LAPX

to

\\P3D\Aerosoft\Bajasim LAPX

Add the Bajasim LAPX foler to the Perpar3D scenery library.

Bajasim San Jose del Cabo International Airport X

\\fsx\aerosoft\Bajasim SJDX

to

\\P3D\aerosoft\Bajasim SJDX

Add the Bajasim SJDX folder to the Prepar3D scenery library.

E:\fsx\Scenery\world\scenery copy the following file:

00D_ALT.bgl

to

\\P3D\Scenery\world\scenery

Barcelona X

\\fsx\aerosoft\Mega Airport Barcelona X

to

\\P3D\aerosoft\Mega Airport Barcelona X

Add Mega Airport Barcelona X folder to your scenery library in Prepar3D

Ben Gurion X

\\fsx\Effects copy the following files:

fx_DrbGRNBulb.fx

fx_DrbLBulb.fx

fx_DrbOrengBulb.fx

fx_DrbREDBulb.fx

fx_Drbulb.fx

fx_DrGroundlgt.fx

fx_DrGroundlgtYL.fx

to

\\P3D\Effects

\\fsx\Effects exture copy the follwing files:

DR2.bmp

rospot.bmp

to

\\P3D\Effects exture

E:\fsx\FSAddon\BenGurionX

to

\\P3D\FSAddon\BenGurionX

Add BenGurionX to the Perpar3D scenery library.

Bornholm Island 2011 X

\\fsx\aerosoft\Bornholm Island 2011 X

to

\\P3D\aerosoft\Bornholm Island 2011 X

Add the Bornholm Island 2011 X folder to the Prepar3D scenery library.

Brussels X

\\fsx\Aerosoft\Mega Airport Brussels X

to

\\P3D\Aerosoft\Mega Airport Brussels X

Add Mega Airport Brussels X folder to the Perpar3D scenery library.

Budapest X

\\fsx\aerosoft\Mega Airport Budapest

to

\\P3D\aerosoft\Mega Airport Budapest

Add the LHBP_AIRPORT and LHBP_CITY folders to the Prepar3D scenery library making sure _Airport is above _CITY.

\\fsx\Effects copy the following files:

Bp_Dark_smoke.fx

bp_large_smoke.fx

Bp_light1.fx

Bp_Mid_Smoke.fx

Bp_Small_Smoke.fx

Bp_Small_Smoke2.fx

to

\\P3D\Effects

Bari X

\\fsx\aerosoft\ASE_DATA

to

\\P3D\aerosoft\ASE_DATA

\\fsx\aerosoft\Bari X

to

\\P3D\aerosoft\Bari X

\\fsx\SimObjects\Misc\ASE_DATA

to

\P3D\SimObjects\Misc\ASE_DATA

\\fsx\SimObjects\Misc\Bari X

to

\\P3D\fsx\SimObjects\Misc\Bari X

Add the Bari X folder to the Perpar3d scenery library.

Cuzco X

\\fsx\aerosoft\Cuzco X

to

\\P3D\aerosoft\Cuzco X

\\fsx\Missions\Aerosoft Missions\Cuzco X - Approach

to

\\P3D\Missions\Aerosoft Missions\Cuzco X - Approach

\\fsx\Rewards Copy the following file

CuzcoX.RWD

to

\\P3D\Rewards

\\fsx\Scenery\World\Scenery Copy the following file

SPZO_CuscoX_ALT.BGL

to

\\P3D\Scenery\World\Scenery

Add the Cuzco X folder to the Prepar3D scenery library

Dillingham X

\\fsx\Aerosoft\Hawaii Dillingham X

to

\\P3D\Aerosoft\Hawaii Dillingham X

Add the Hawaii Dillingham X folder to the Prepar3D scenery library.

\\fsx\Effects copy the follwing files:

Aerosoft_Windsock.fx

Helgoland_Gulls.fx

Helgoland_Waves.fx

to

\\P3D\Effects

\\fsx\Scenery\World\Scenery copy the following file:

0_phdh_af2_header.bgl

to

\\P3D\Scenery\World\Scenery

\\fsx\Sound copy the follwing files:

Aerosoft_gulls_loud_loop.wav

Aerosoft_waves_big_loop.wav

Aerosoft_windsock_loop.wav

to

\\P3D\Sound

Fairbanks

\\fsx\aerosoft\ASE_DATA

to

\\P3D\aerosoft\ASE_DATA

\\fsx\aerosoft\Fairbanks X

to

\\P3D\aerosoft\Fairbanks X

\\fsx\aerosoft\Fairbanks X Terrain with UTA

to

\\P3D\aerosoft\Fairbanks X Terrain with UTA

\\fsx\aerosoft\Fairbanks X Terrain without UTA

to

\\P3D\aerosoft\Fairbanks X Terrain without UTA

\\fsx\Effects Copy the following files

fx_simwings_PAFA_apronlight1.fx

fx_simwings_PAFA_apronlight1_control.fx

to

\\P3D\Effects

\\fsx\Effects\texture Copy the following files

fx_simwings_apronlight1PAFA.bmp

fx_simwings_apronlight1sidePAFA.bmp

to

\\P3D\Effects\texture

\\fsx\SimObjects\Misc\ASE_DATA

to

\\P3D\SimObjects\Misc\ASE_DATA

\\fsx\SimObjects\Misc\Fairbanks X

to

\\P3D\Misc\Fairbanks X

\\fsx\Sound

to

\\P3D\Sound

Add the Fairbanks X and the Fairbanks X Terrain without UTA folders to the Perpar3d scenerey library. If you are using Ultimate Alaska in Perpar3D then add Fairbanks X with UTA.

If you haven't already done so add ASE to the Perpar3D dll.xml file.


<Launch.Addon>

  <Name>ASE-Data</Name>

  <Disabled>False</Disabled>

  <ManualLoad>False</ManualLoad>

  <Path>Aerosoft\ASE_DATA\AseData.dll</Path>

</Launch.Addon>

Faro X

\\fsx\aerosoft\Faro X

to

\\P3D\aerosoft\Faro X

Add the Faro X folder to the Prepar3D scenery library.

\\fsx\Effects copy the follwong files:

Aerosoft_LPFR_Beacon_Green.fx

Aerosoft_LPFR_Beacon_White.fx

Aerosoft_LPFR_red_Dot.fx

Aerosoft_LPFR_Steam_small.fx

Aerosoft_LPFR_Taxilight_blue.fx

Aerosoft_LPFR_Taxilight_green.fx

Aerosoft_LPFR_white_Dot.fx

to

\\P3D\Effects

Frankfurt X

\\fsx\aerosoft\Afd

to

\\P3D\aerosoft\Afd

\\fsx\aerosoft\Mega Airport Frankfurt

to

\\P3D\aerosoft\Mega Airport Frankfurt

\\fsx\aerosoft\Mega Airport Frankfurt_LC

to

\\P3d\aerosoft\Mega Airport Frankfurt_LC

Add the Mega Airport Frankfurt_LC, Mega Airport Frankfurt and Afd folders to the Perpar3d scenery

library ensuring Mega Airport Frankfurt is above Mega Airport Frankfurt_LC. For Afd I personaly always

make sure this is added to the very top of my scenery library and after installing other sceneries I

manually move it back to the top.

Frankfurt Hahn X

\\fsx\aerosoft\Afd

to

\\P3D\aerosoft\Afd

\\fsx\aerosoft\ASE_DATA

to

\\P3D\aerosoft\ASE_DATA

\\fsx\aerosoft\Frankfurt-Hahn X

to

\\P3D\aerosoft\Frankfurt-Hahn X

\\fsx\SimObjects\Misc\ASE_DATA

to

\\P3D\SimObjects\Misc\ASE_DATA

\\fsx\SimObjects\Misc\Frankfurt-Hahn X

to

\\P3D\SimObjects\Misc\Frankfurt-Hahn X

Add the Frankfurt-Hahn X folder to the Prepar3D scenery library, remember to move it to below Afd in the

scenery library.

Gibraltar X

\\fsx\aerosoft\Gibraltar X

to

\\P3d\aerosoft\Gibraltar X

Add the 1_GIB_FSX_Airport and 1_GIB_FSX_Terrain folders to the Prepar3D scenery library making sure the _Airport folder is above the _Terrain folder.

\\fsx\Effects copy the following files:

fx_simwings_apronlight1.fx

fx_simwings_apronlight1_control.fx

fx_simwings_apronlight2.fx

fx_simwings_apronlight2_control.fx

fx_simwings_streetlight.fx

fx_simwings_streetlight_control.fx

to

\\P3D\Effects

\\fsx\Effects exture copy the following files:

fx_simwings_apronlight1.bmp

fx_simwings_apronlight1side.bmp

fx_simwings_streetlight.bmp

to

\\P3D\Effects exture

\\fsx\Scenery\World\Scenery copy the following file:

AFX_LXGB_ALT.bgl

to

\\P3D\Scenery\World\Scenery

\\fsx\Sound\AES copy the following files:

AES-City.wav

AES-Horn.wav

AES-Moewen.wav

to

\\P3D\Sound\AES

  • Upvote 1

Share this post


Link to post

Let me be the first to thank you. And the first light & bitter is on me...or was that the third?

Cheers,

Clayton

Share this post


Link to post

Most welcome, more to follow this weekend, between BF3, beer and that thing going off in Poland and the Ukraine.

  • Upvote 1

Share this post


Link to post

First off a note, Frankfurt and Frankfurt Hahn added roughly in alphabetical order in my previous post.

Pt 3

German Airfields 1, 2, 3 and 9 & German Airports 1,2 & 3

I am grouping these all together as it makes more sense when adding them to the scenery library. Note

Paderborn/Lippstadt X has its own P3D installer and thus not covered here.

\\fsx\Aerosoft\AFD

to

\\P3D\Aerosoft\AFD

\\fsx\Aerosoft\German Airfields 1

to

\\P3D\Aerosoft\German Airfields 1

\\fsx\Aerosoft\German Airfields 1_LC

to

\\P3D\Aerosoft\German Airfields 1_LC

\\fsx\Aerosoft\German Airfields 2

to

\\P3D\Aerosoft\German Airfields 2

\\fsx\Aerosoft\German Airfields 3

to

\\P3D\Aerosoft\German Airfields 3

\\fsx\Aerosoft\German Airfields 9

to

\\P3D\Aerosoft\German Airfields 9

\\fsx\Aerosoft\German Airfields 9_LC

to

\\P3D\Aerosoft\German Airfields 9_LC

\\fsx\Aerosoft\VFR-Airfields Libraries

to

\\P3D\Aerosoft\VFR-Airfields Libraries

\\fsx\Aerosoft\VFR-Airfields Traffic

to

\\P3D\Aerosoft\VFR-Airfields Traffic

\\fsx\Aerosoft\German Airports 1 - Friedrichshafen

to

\\P3D\Aerosoft\German Airports 1 - Friedrichshafen

\\fsx\Aerosoft\German Airports 1 - Stuttgart X

to

\\P3D\Aerosoft\German Airports 1 - Stuttgart X

\\fsx\Aerosoft\German Airports 2

to

\\P3D\Aerosoft\German Airports 2

\\fsx\Aerosoft\German Airports 2_LC

to

\\P3D\Aerosoft\German Airports 2_LC

\\fsx\Aerosoft\German Airports 3

to

\\P3D\Aerosoft\German Airports 3

\\fsx\Aerosoft\VFR-Airfields Traffic

to

\\P3D\Aerosoft\VFR-Airfields Traffic

\\fsx\Effects copy the following files:

Aerosoft_EDHB_Traktor.fx

Aerosoft_EDHE_Gulls.fx

Aerosoft_EDHG_bw_Smoke.fx

Aerosoft_EDHG_juco_Smoke.fx

Aerosoft_edhg_light_pole.fx

Aerosoft_EDHG_navtv_red.fx

Aerosoft_EDHG_Smoke.fx

Aerosoft_EDHG_ws_Smoke.fx

Aerosoft_EDHK_Beacon_Red.fx

Aerosoft_EDHK_light_blue.fx

Aerosoft_EDHK_light_white.fx

Aerosoft_EDHK_Navlight_red.fx

Aerosoft_EDHK_Steam_Large.fx

Aerosoft_EDHK_streetlight.fx

Aerosoft_EDLP_bluelight.fx

Aerosoft_EDLP_Cntrl_redblue.fx

Aerosoft_EDLP_Fog.fx

Aerosoft_EDLP_grlight_taxi_sm.fx

Aerosoft_EDLP_l_white_s.fx

Aerosoft_EDLP_redlight_sm.fx

Aerosoft_EDLP_run_green_s.fx

Aerosoft_EDLP_run_red_s.fx

Aerosoft_EDLP_running rabbit.fx

Aerosoft_EDLP_Tower_Light.fx

Aerosoft_EDNY1.fx

Aerosoft_EDNY1_control.fx

Aerosoft_EDNY2.fx

Aerosoft_EDNY2_control.fx

Aerosoft_EDNY3.fx

Aerosoft_EDNY3_control.fx

Aerosoft_EDVH_nav_gre.fx

Aerosoft_EDVH_nav_red.fx

Aerosoft_EDVH_nav_white.fx

Aerosoft_EDVH_Smoke.fx

Aerosoft_EDVU_light_pole.fx

Aerosoft_EDVU_Smoke.fx

Aerosoft_EDWE_light_rwystartend07.fx

Aerosoft_EDWE_MALSF_07.fx

Aerosoft_EDWG_Lighthouse.fx

Aerosoft_EDWG_Snd_Austernfischer.fx

Aerosoft_EDWG_Snd_Lokal.fx

Aerosoft_EDWG_Snd_Moewen.fx

Aerosoft_EDWR_Beacon.fx

Aerosoft_EDWR_light_rwystartend13.fx

Aerosoft_EDWR_light_rwystartend31.fx

Aerosoft_EDWR_light_white.fx

Aerosoft_EDWY_light_blue.fx

Aerosoft_EDWY_light_rwystartend09.fx

Aerosoft_EDWY_light_rwystartend27.fx

Aerosoft_EDWY_light_white.fx

Aerosoft_EDWY_light_white_bu.fx

Aerosoft_EDWY_Lighthouse.fx

Aerosoft_EDWZ_Small_Smoke.fx

Aerosoft_EDXB_light_rwystartend11.fx

Aerosoft_EDXB_light_rwystartend11a.fx

Aerosoft_EDXB_light_rwystartend29.fx

Aerosoft_EDXB_light_rwystartend29a.fx

Aerosoft_EDXB_light_white.fx

Aerosoft_EDXM_light_rwystartend11.fx

Aerosoft_EDXM_light_rwystartend11a.fx

Aerosoft_EDXM_light_rwystartend29.fx

Aerosoft_EDXM_light_rwystartend29a.fx

Aerosoft_EDXM_light_white.fx

Aerosoft_EDXY_Gulls.fx

Aerosoft_EDXY_Restaurant.fx

Aerosoft_EDXY_Waves.fx

Aerosoft_fw_lightgreen.fx

Aerosoft_fw_lightred.fx

Aerosoft_fw_lightwhite.fx

Aerosoft_fw_Steam_dirty.fx

Aerosoft_fw_Steam_thin.fx

Aerosoft_GANi_Light_blue.fx

Aerosoft_GANi_light_pole.fx

Aerosoft_GANi_light_white.fx

Aerosoft_GANi_Navlight_red.fx

cr_cntrl_sound_01.fx

cr_cntrl_sound_02.fx

cr_cntrl_sound_03.fx

cr_feuer_01.fx

cr_feuer_02.fx

cr_Lampe_01.fx

cr_Lampe_02.fx

cr_Lampe_03.fx

cr_Lampe_04.fx

cr_Lampe_05.fx

cr_Lampe_blau_01.fx

cr_Lampe_rot_01.fx

cr_rauch_01.fx

cr_rauch_02.fx

cr_schornstein_01.fx

cr_schornstein_02.fx

cr_schornstein_03.fx

cr_sound_01.fx

cr_sound_02.fx

cr_sound_03.fx

cr_sound_04.fx

cr_sound_05.fx

cr_sound_06.fx

cr_sound_07.fx

cr_sound_08.fx

cr_sound_09.fx

cr_springbrunnen_01.fx

cr_springbrunnen_02.fx

GermanAirfields2_Smoke1.fx

Inselhuepfen_Lighthouse.fx

Inselhuepfen_Small_Smoke.fx

to

\\P3D\Effects

\\fsx\Effects texture copy the following files:

Aerosoft_Apronlights.bmp

Aerosoft_EDLP_grlight.bmp

Aerosoft_EDLP_grlight_hqi.bmp

Aerosoft_EDLP_grlight_li3lamp.bmp

Aerosoft_EDLP_grlight_neon.bmp

Aerosoft_EDLP_grlight_taxi_sm.bmp

Aerosoft_EDWR_Beacon.bmp

Aerosoft_Effect1.bmp

cr_feuer_01.bmp

cr_Lampe_01.bmp

EDHG_light_pole.bmp

GANi_light_pole.bmp

to

\\P3D\Effects texture

\\fsx\Missions\Aerosoft Missions

to

\P3D\Missions\Aerosoft Missions

\\fsx\Rewards copy the following files:

GAF2_Rewards.rwd

Inselflieger_Rewards.rwd

to

\\P3D\Rewards

\\fsx\SimObjects\Airplanes\C172_LFH

to

\\P3D\SimObjects\Airplanes\C172_LFH

\\fsx\SimObjects\Airplanes\C172_NF

to

\\P3D\SimObjects\Airplanes\C172_NF

\\fsx\SimObjects\Boats\FW_IFM_Alkor

to

\\P3D\SimObjects\Boats\FW_IFM_Alkor

\\fsx\SimObjects\Boats\fw_Ships_Foerdedampfer_1

to

\\P3D\SimObjects\Boats\fw_Ships_Foerdedampfer_1

\\fsx\SimObjects\Rotorcraft\fw_SeaKing_AI

to

\\P3D\SimObjects\Rotorcraft\fw_SeaKing_AI

\\fsx\Sound copy the following files:

Aerosoft_austernfischer_loop.wav

Aerosoft_bar_day_loop.wav

Aerosoft_barking_loop.wav

Aerosoft_chopper_loop.wav

Aerosoft_churchbells_loop.wav

Aerosoft_compressor_loop.wav

Aerosoft_crows_loop.wav

Aerosoft_engine_diesel_loop.wav

Aerosoft_engine_ship_turbine_loop.wav

Aerosoft_engine_ship_turbine_loop2.wav

Aerosoft_gulls_loud_loop.wav

Aerosoft_harbor_detail_loop.wav

Aerosoft_wave1.wav

Aerosoft_waves_big_loop.wav

Aerosoft_windsock_loop.wav

cr_sound_01.wav

cr_sound_02.wav

cr_sound_03.wav

cr_sound_04.wav

cr_sound_05.wav

cr_sound_06.wav

cr_sound_07.wav

cr_sound_08.wav

cr_sound_09.wav

to

\\P3D\Sound

Add the following folders: German Airfields 1, German Airfields 1_LC, German Airfields 2, German Airfields 3, German Airfields 9, German Airfields 9_LC, VFR-Airfields Library, VFR-Airfields Traffic, German Airports 1 - Friedrichshafen, German Airports 1 - Stuttgart X, German Airports 2, German Airports 2_LC and German Airports 3 to the Perpar3D scenery library. Please ensure they are if the following order and below Afd:

Pictures speak a thousand words....

post-26298-0-07241100-1339334795_thumb.j

Update:

You will need to create a dll.xml file for some of the newer aerosoft addons to work. The easiest way is to download FSUIPC and install it for Prepar3D. That will create dll.xml in \\users\your name\app data\roaming\Locheed Martin\Prepar3D

Now add the following text:


<Launch.Addon>

   <Name>ASE-Data</Name>

   <Disabled>False</Disabled>

   <ManualLoad>False</ManualLoad>

   <Path>Aerosoft\ASE_DATA\AseData.dll</Path>

</Launch.Addon>

It should look similar to this, obviously there will be more entries though.


<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="Launch" version="1,0">

<Descr>Launch</Descr>

<Filename>dll.xml</Filename>

<Disabled>False</Disabled>

<Launch.ManualLoad>False</Launch.ManualLoad>

<Launch.Addon>

   <Name>ASE-Data</Name>

   <Disabled>False</Disabled>

   <ManualLoad>False</ManualLoad>

   <Path>Aerosoft\ASE_DATA\AseData.dll</Path>

</Launch.Addon>

</SimBase.Document>

Share this post


Link to post

Updates, added Athens and a little more information in various areas.

Pt 4.

Heathrow

\\fsx\aerosoft\Mega Airport London Heathrow

to

\\P3D\aerosoft\Mega Airport London Heathrow

Add the Mega Airport London Heathrow folder to the Prepar3D scenery library.

Hong Kong

\\fsx\Addon Scenery\FlyTampa-HongKong

TO

\\p3d\Addon Scenery\FlyTampa-HongKong

\\fsx\Addon Scenery\FlyTampa-HongKong_LC

TO

\\P3D\Addon Scenery\FlyTampa-HongKong_LC

\\fsx\effects Copy the following files:

flytampa_aiship_wake_large.fx

flytampa_aiship_wake_medium.fx

flytampa_aiship_wake_small.fx

flytampa_aiship_wake_tiny.fx

flytampa_hk_fw_bldg_seq.fx

flytampa_hk_fw_bldg01.fx

flytampa_hk_fw_bldg02.fx

flytampa_hk_fw_seq.fx

flytampa_hk_fw01.fx

flytampa_hk_fw02.fx

flytampa_hk_fw03.fx

flytampa_hk_fw04.fx

flytampa_hk_fw05.fx

flytampa_hk_glow01_ctrl_fsx.fx

flytampa_hk_glow01_fsx.fx

flytampa_hk_glow02_ctrl_fsx.fx

flytampa_hk_glow02_fsx.fx

flytampa_hk_glow03_ctrl_fsx.fx

flytampa_hk_glow03_fsx.fx

flytampa_hk_glow04_ctrl_fsx.fx

flytampa_hk_glow04_fsx.fx

flytampa_hk_light_barrier_red.fx

flytampa_hk_light_barrier_red_ctrl.fx

flytampa_hk_light_blue_large.fx

flytampa_hk_light_blue_large_ctrl.fx

flytampa_hk_light_green_large.fx

flytampa_hk_light_green_large_ctrl.fx

flytampa_hk_light_green_small.fx

flytampa_hk_light_green_small_ctrl.fx

flytampa_hk_light_red_large.fx

flytampa_hk_light_red_large_ctrl.fx

flytampa_hk_light_red_strobe_fsx.fx

flytampa_hk_light_rwy13_red.fx

flytampa_hk_light_rwy13_red_ctrl.fx

flytampa_hk_light_white_strobe1_fsx.fx

flytampa_hk_light_white_strobe2_fsx.fx

flytampa_hk_light_white_strobe3_fsx.fx

flytampa_hk_lightbeam01.fx

flytampa_hk_lightbeam01_ctrl.fx

flytampa_hk_lightbeam02.fx

flytampa_hk_lightbeam02_ctrl.fx

flytampa_hk_lights_appr13_white_large.fx

flytampa_hk_lights_appr13_white_large_ctrl.fx

flytampa_hk_lights_appr13_white_small.fx

flytampa_hk_lights_appr13_white_small_ctrl.fx

flytampa_hk_smoke1.fx

none.fx

to

\\P3D\effects

\\fsx\effects exture Copy the follwing files:

flytampa_glow_fsx.bmp

flytampa_halo1.bmp

flytampa_lightbeam.bmp

flytampa_wake1.bmp

to

\\P3D\effects exture

\\fsx\SimObjects\Boats\flytampa_aiship_barge_small

to

\\P3D\SimObjects\Boats\flytampa_aiship_barge_small

\\fsx\SimObjects\Boats\flytampa_aiship_ferry_medium

to

\\P3D\SimObjects\Boats\flytampa_aiship_ferry_medium

\\fsx\SimObjects\Boats\flytampa_aiship_freigther_medium

to

\\P3D\SimObjects\Boats\flytampa_aiship_freigther_medium

\\fsx\SimObjects\Boats\flytampa_aiship_junk

to

\\P3D\SimObjects\Boats\flytampa_aiship_junk

\\fsx\SimObjects\Boats\flytampa_aiship_starferry

to

\\P3D\SimObjects\Boats\flytampa_aiship_starferry

\\fsx\SimObjects\Boats\flytampa_aiship_tugboat

to

\\P3D\SimObjects\Boats\flytampa_aiship_tugboat

Add \\p3d\Addon Scenery\FlyTampa-HongKong and \\p3d\Addon Scenery\FlyTampa-HongKong_LC to the Prepar3D scenery library enuring \\p3d\Addon Scenery\FlyTampa-HongKong_LC is below \\p3d\Addon Scenery\FlyTampa-HongKong

Iceland X

\\fsx\aerosoft\Iceland X\Iceland X - priority 1

to

\\P3D\aerosoft\Iceland X\Iceland X - priority 1

\\fsx\aerosoft\Iceland X\Iceland X - priority 2

to

\\P3D\aerosoft\Iceland X\Iceland X - priority 2

\\fsx\Effects Copy the following files:

Aerosoft_IceX_Beam.fx

Aerosoft_IceX_BlueLagoon.fx

Aerosoft_IceX_Dettifoss_1.fx

Aerosoft_IceX_Dettifoss_2.fx

Aerosoft_IceX_Dettifoss_3.fx

Aerosoft_IceX_Dirtspot_1.fx

Aerosoft_IceX_Fjallfoss_1.fx

Aerosoft_IceX_Fjallfoss_2.fx

Aerosoft_IceX_Flashlight_bright.fx

Aerosoft_IceX_Flashlight_bright_LOD.fx

Aerosoft_IceX_Geyser_1.fx

Aerosoft_IceX_Geyser_2.fx

Aerosoft_IceX_Geyser_cntrl_Geysir.fx

Aerosoft_IceX_Geyser_cntrl_Stokkur.fx

Aerosoft_IceX_Glymur_Waterfall.fx

Aerosoft_IceX_Godafoss.fx

Aerosoft_IceX_Hengifoss1.fx

Aerosoft_IceX_Hotspot_big.fx

Aerosoft_IceX_Hotspot_sm.fx

Aerosoft_IceX_Light_bright.fx

Aerosoft_IceX_Light_bright_red.fx

Aerosoft_IceX_Light_bright_red_LOD.fx

Aerosoft_IceX_Light_red_h.fx

Aerosoft_IceX_Light_white.fx

Aerosoft_IceX_PeaceTower.fx

Aerosoft_IceX_Seljandsfoss.fx

Aerosoft_IceX_Skogafoss1.fx

Aerosoft_IceX_smoke_w.fx

Aerosoft_IceX_Spot_1.fx

Aerosoft_IceX_Spot_2.fx

Aerosoft_IceX_Spot_3.fx

Aerosoft_IceX_Spot_4.fx

Aerosoft_IceX_Spot_5.fx

Aerosoft_IceX_Spot_6.fx

to

\\P3D\Effects

\\fsx\Effects exture Copy the following files:

Aerosoft_IceX_Dirt.bmp

Aerosoft_IceX_Spots.bmp

to

\\P3D\Effects exture

\\fsx\Missions\Aerosoft Missions\Iceland X - Tour

to

\\P3D\Missions\Aerosoft Missions\Iceland X - Tour

\\fsx\Scenery\World\Scenery Copy the following files:

BIAR_ADE_FW_ALT.bgl

BIBA_ADE_FW_ALT.bgl

BIGJ_ADE_FW_ALT.bgl

BIHK_ADE_FW_ALT.bgl

BIHU_ADE_FW_ALT.bgl

BIKF_ADE_FW_IceX_ALT.bgl

BISA_ADE_FW_ALT.bgl

BISF_ADE_FW_ALT.bgl

BITE_ADE_FW_ALT.bgl

BITH_ADE_FW_ALT.bgl

BITM_ADE_FW_ALT.bgl

BITN_ADE_FW_ALT.bgl

to

\\P3D\Scenery\World\Scenery

Add the Iceland X - priority 1 and Iceland X - priority 2 folders to the Prepar3D scenery library making sure priority 2 is below priority 1.

Innsbruck X

\\fsx\Aerosoft\Approaching LOWI X

to

\\P3D\Aerosoft\Approaching LOWI X

\\fsx\Effects Copy the following files:

fx_Strahler.fx

g_cntrl_floodred.fx

g_cntrl_navredh.fx

g_cntrl_txlights.fx

g_floodred.fx

g_floodred_MOD.fx

g_floodred_puls.fx

g_floodred_puls_MOD.fx

g_navredh.fx

g_txlights.fx

gw_cntrl_navwhih.fx

gw_cntrl_obslight.fx

gw_cntrl_obslight_red_puls.fx

gw_cntrl_txlights.fx

gw_navwhih.fx

gw_obslight.fx

gw_obslight_red_puls.fx

gw_rauch.fx

gw_taxiwayedgelight.fx

to

\\P3D\Effects

\\fsx\Texture Copy the following files:

ibkbld.dds

ibkbldlm.ffs

ibkrow.bmp

ibkrowlm.bmp

to

\\P3D\Texture

Add the Approaching LOWI X folder to the Prepar3D scenery library.

Keflavik X

\\fsx\aerosoft\Keflavik X

to

\\P3D\aerosoft\Keflavik X

\\fsx\Scenery\world\scenery Copy the following file

BIKF_ALT_KeflavikX.bgl

to

\\P3D\Scenery\world\scenery

Add the Keflavik X folder to the Prepar3d scenery library.

Kos X

\\fsx\aerosoft\Kos X

to

\\P3D\aerosoft\Kos X

\\fsx\Effects Copy the following files:

Aerosoft_LGKO_red_Dot.fx

Aerosoft_LGKO_Spot_yellow.fx

Aerosoft_LGKO_Steam_small.fx

Aerosoft_LGKO_Taxilight_blue.fx

Aerosoft_LGKO_Tower_Light.fx

Aerosoft_LGKO_white_Dot.fx

to

\\P3D\Effects

\\fsx\SimObjects\Airplanes\A320LGKO

to

\\P3D\SimObjects\Airplanes\A320LGKO

\\fsx\SimObjects\Airplanes\A321LGKO

to

\\P3D\SimObjects\Airplanes\A321LGKO

\\fsx\SimObjects\Airplanes\B734LGKO

to

\\P3D\SimObjects\Airplanes\B734LGKO

\\fsx\SimObjects\Airplanes\B738LGKO

to

\\P3D\SimObjects\Airplanes\B738LGKO

\\fsx\SimObjects\Airplanes\B752LGKO

to

\\P3D\SimObjects\Airplanes\B752LGKO

\\fsx\SimObjects\Airplanes\BAe1463LGKO

to

\\P3D\SimObjects\Airplanes\BAe1463LGKO

Add the Kos X folder to the Perpar3D scenery library.

Krakow Balice 2012 X

\\fsx\aerosoft\EPKK Krakow Balice 2012 X

to

\\P3D\aerosoft\EPKK Krakow Balice 2012 X

Add the EPKK Krakow Balice 2012 X folder to the Perpar3D scenery library.

  • Upvote 1

Share this post


Link to post

Mathijs, the installer works a treat, though haven't got as far as the M's. The Maldives I seem to remember cropping up, as the sim loaded temptation got the better of the and well I guess the rest as they say is history there.

Share this post


Link to post

Antarctica X

Assuming you have the scenery installed and activated via the launcher you will need to copy the following files and folders:

How do you incooperate the Scenery Tool from AntarcticaX to change season, static aircraft, LOD Radius and lights into P3D?

Share this post


Link to post

Fred, I cant remember off the top of my head, will check later on when I get home from work. I suspect changing the LOD radius wont be possible but not 100% sure its a while now since I ported Antacrtica.

Share this post


Link to post

Matt, this is a hugely helpful thread. I'm just about ready to take the plunge with P3D and I'm rather relieved to see that Fly Tampa's Hong Kong is covered in your instructions.

Do you have VFR London by any chance ? Thats the only other scenery product I am concerned about.

Thanks again for your efforts, very well done.

:cheers_s:

Share this post


Link to post

Yes I do Paul, and yes it does work in P3D, I dont have instructions as I formatted my rig to do a clean install to prove someone wrong about something :lol: If I remomber correctly its pretty simple to get working.

Share this post


Link to post

Excellent ! Lockheed Martin's share price is about to rise. Thanks matey ! :)

Share this post


Link to post

If you have any troubles with it just hollar :lol:

Oh I will ! This whole process is going to take a while, very much one step at a time. In fact it may be some time before I get round to Hong Kong, because initially what I would like to do is get used to P3D, then get Orbx FTX England, which allegedly is due out before the year's end, then add in things like ACG's Duxford, Dave Garwoods Auster and Rapide, and Anthony Lynch's Tiger Moth. Then will come VFR London and some of the Aerosoft planes, followed by FTX Australia and Pacific North West. Its going to be a major exercise, but worth it I think.

Share this post


Link to post

Most certainly. Most of which you should have no problems with. Though with the eagerly awaited FSX England we cant say how VFR London will work. Though Im sure with some adjustments the two should happily coexist together.

Share this post


Link to post

Most certainly. Most of which you should have no problems with. Though with the eagerly awaited FSX England we cant say how VFR London will work. Though Im sure with some adjustments the two should happily coexist together.

I'm sure ACG will make whatever tweaks are necessary to Duxford to make it blend in nicely with FTX England. However, as for VFR London, Horizon Simulation's phone seems to be is off the hook at the moment...

Share this post


Link to post
Guest
This topic is now closed to further replies.

×
×
  • Create New...