radeon29 17 Posted July 29, 2019 Share Posted July 29, 2019 I had a problem after the faf point in final app mode(in other modes too), when approaching the height of the decision, I move the rudders to TOGA(AP ON, AT ON), but the aircraft continues to decline+accelerate and the phase of the go around plan is not activated and I can’t manually select direct to these points to go around plan... If you repeat these actions on fslabs, then when you activate the toga, the aircraft starts to climb and accelerate I do a re-selection of nav(trk/hgd)and the aircraft follows a go around plan... something broke ? Link to comment Share on other sites More sharing options...
radeon29 17 Posted July 30, 2019 Author Share Posted July 30, 2019 I took screenshots, and noticed a difference in flight logic: FSlabs FINAL APP V/DEV magenta, height 2300 not manage, RNV APP, correct logic! Please login to display this image. Aerosoft FINAL APP V/DEV not magenta, height 2300 manage, not RNV APP, not correct logic! Please login to display this image. FSlabs FINAL APP go TOGA, correct logic! Please login to display this image. Aerosoft FINAL APP go TOGA, not correct logic! Please login to display this image. what are you doing?! is it broken... Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 30, 2019 Aerosoft Share Posted July 30, 2019 We'll have a look at that. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 2, 2019 Author Share Posted August 2, 2019 Unfortunately, a clean install update did not fix this ... I tried to find similar cases on the network but did not find them, something broke the autopilot logic;( Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 2, 2019 Deputy Sheriffs Share Posted August 2, 2019 Let me comment two items: V/DEV magenta or green and RNAV APP or RNAV12 at the ND is just a difference of the EIS2 version. FSLabs model a older version. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 2, 2019 Author Share Posted August 2, 2019 18 minutes ago, masterhawk said: RNAV APP or RNAV12 ok, maybe i agree with that 18 minutes ago, masterhawk said: V/DEV magenta or green hmm, I hear about this for the first time, I have never seen a green deviation... in any case, the go around phase, does not work correctly, there is no ga track and srs... Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 3, 2019 Deputy Sheriffs Share Posted August 3, 2019 21 hours ago, radeon29 said: ok, maybe i agree with that hmm, I hear about this for the first time, I have never seen a green deviation... in any case, the go around phase, does not work correctly, there is no ga track and srs... I will check next week with a test flight. Last time I did a GA all was working fine. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 3, 2019 Author Share Posted August 3, 2019 1 hour ago, masterhawk said: I will check next week with a test flight. Last time I did a GA all was working fine. I think you will have everything in order, probably only I have some kind of unique problem, at the moment no one has encountered a similar problem... Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 3, 2019 Deputy Sheriffs Share Posted August 3, 2019 23 hours ago, radeon29 said: ok, maybe i agree with that hmm, I hear about this for the first time, I have never seen a green deviation... Here you go: Please login to display this image. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 3, 2019 Author Share Posted August 3, 2019 2 minutes ago, masterhawk said: Here you go: interesting, up to this point has not yet seen green deviation Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 5, 2019 Deputy Sheriffs Share Posted August 5, 2019 @radeon29 just in case for your next try of a GA. Our Bus will display SRS NAV. SRS GA TRK is only displayed in certain conditions. That’s also a difference between more modern systems and the older FSL model. Please login to display this image. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 5, 2019 Author Share Posted August 5, 2019 28 minutes ago, masterhawk said: SRS GA TRK is only displayed in certain conditions specify in what conditions? I did not see this in your message. as you can see in my screenshot above, everything is selected correctly. p/s I’m studying aviation is not the first day, I have the necessary documents, FCOM: ENGAGEMENT CONDITIONS The SRS mode engages automatically when the thrust levers are set to the TOGA or FLX/MCT detent, providing: - V2 has been inserted in the MCDU PERF TAKEOFF page - The slats are extended - The aircraft has been on ground for at least 30 s. DISENGAGEMENT CONDITIONS The SRS mode disengages: - Automatically, at the acceleration altitude (ACC ALT), or if ALT* or ALT CST* mode engages (above 400 ft RA) - If the flight crew engages another vertical mode - If the flight crew selects a speed while in SRS mode: SRS reverts to OP CLB mode, and a triple-click aural warning is heard. All that is highlighted, I performed in my flight, but nevertheless, the SRS mode did not work properly... Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 5, 2019 Author Share Posted August 5, 2019 And add, as you said above: Go Around (GA) FLIGHT CREW OPERATING MANUAL GENERAL Applicable to: ALL When the flight crew performs a go-around, the Speed Reference System (SRS) vertical guidance mode automatically engages. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 8, 2019 Deputy Sheriffs Share Posted August 8, 2019 Hi, no problem. I got SRS NAV. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 8, 2019 Author Share Posted August 8, 2019 28 minutes ago, masterhawk said: Hi, no problem. I got SRS NAV. hello, I'm glad to see you you didn’t do the main thing, you didn’t activate the APPR mode. p/s as well as I noticed a small error: there are no minima of 750ft for RNP Y RWY 05 LPMA for cat C aircraft, , In addition, the FPA is not authorized for this type approach Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 8, 2019 Deputy Sheriffs Share Posted August 8, 2019 1 hour ago, radeon29 said: hello, I'm glad to see you you didn’t do the main thing, you didn’t activate the APPR mode. p/s as well as I noticed a small error: there are no minima of 750ft for RNP Y RWY 05 LPMA for cat C aircraft, , In addition, the FPA is not authorized for this type approach I just set anything, to check if SRS is working. Will do later another with APPR. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 8, 2019 Author Share Posted August 8, 2019 5 minutes ago, masterhawk said: I just set anything, to check if SRS is working Ok! 5 minutes ago, masterhawk said: Will do later another with APPR. I will wait, if it’s not difficult for you, save to the point of IF, then I will try to download it and check it(aircraft a320 plz). Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 8, 2019 Deputy Sheriffs Share Posted August 8, 2019 Hi, also with APPR no problem. A saved flight:Prepar3D v4 Files.zip Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 8, 2019 Author Share Posted August 8, 2019 1 hour ago, masterhawk said: Hi, also with APPR no problem. Thx, I am doing a complete reinstallation of the simulator and will check it later... Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 9, 2019 Author Share Posted August 9, 2019 14 hours ago, radeon29 said: and will check it later... I did a complete reinstall SIM(ORBX,vAddon Scenery, FSUIPC, have not even been installed yet), with cleaning all the folders in my documents and so on, but that didn't help... And when I switch the levers to GA detent, the co-pilot says leaving for the go around, nevertheless the SRS mode is not activated... I do not know what else you can try to do;( Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted August 9, 2019 Deputy Sheriffs Share Posted August 9, 2019 According to your Fpln page, the GA mode wasn't activated. I have no idea what is happening. When I test it, I just put the thrustlevers from CL to TOGA. Same as you. Can you enable logging and upoad the log-files, please? Link to comment Share on other sites More sharing options...
radeon29 17 Posted August 9, 2019 Author Share Posted August 9, 2019 35 minutes ago, masterhawk said: According to your Fpln page, the GA mode wasn't activated yes, SRS mode not activating, because of this , the plan go around phase is not activated. 35 minutes ago, masterhawk said: When I test it, I just put the thrustlevers from CL to TOGA yes, this is the only condition for activating the SRS mode if we are in the air in the landing configuration, why it does not happen to me, it is not clear that something is broken... 35 minutes ago, masterhawk said: log-files, please? log.rar Link to comment Share on other sites More sharing options...
radeon29 17 Posted February 29, 2020 Author Share Posted February 29, 2020 the problem persists even on the latest version airbus... how to find the cause of the broken, any ideas? Link to comment Share on other sites More sharing options...
jackjoe 5 Posted March 6, 2020 Share Posted March 6, 2020 Hi radeon29, do you still have this issue? I got the same or similar issue and its caused probably by the CH Throttle Quadrant. Do you have the same throttles? Regards Please have a look here https://forum.aerosoft.com/index.php?/topic/149158-a330-go-around-fma-shows-gs-loc/ Link to comment Share on other sites More sharing options...
radeon29 17 Posted March 7, 2020 Author Share Posted March 7, 2020 On 3/6/2020 at 9:04 AM, jackjoe said: do you still have this issue? Yes;( On 3/6/2020 at 9:04 AM, jackjoe said: its caused probably by the CH Throttle Quadrant. I use only the keyboard, no throttle quadrant, besides, the main toga is activated for me without any problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.