Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/10/21 in all areas

  1. When the productpage only talk about compatible to P3D V4 and not also for P3D V5, the product is only compatible to that Simulator Version. Installer, Tools and Parts of the Addon are not working in V5. That other parts can be used in P3D V5, when you know how to bring them in the sim is mostly possible, but not in any part supported. It‘s on your own risk. It‘s the decision of the Productdeveloper, not of Aerosoft, for which Simulator his Product is provided and compatible and he will have a reason for that.
    2 points
  2. It took a lot of experimenting, but we found a specific route in Australia where this situation could be duplicated at will, so Hans was able to fix it. The requirement to induce the problem was a course very close to due north (e.g. 001 or 002 degrees) and a crosswind coming from the left. After the fix, even with a 80 knot direct crosswind, the aircraft maintains its track perfectly, so this issue is definitely solved.
    2 points
  3. The Honeycomb configurator is only concerned with buttons, switches, knobs, and LEDs. The Axes you should configure in P3D/MSFS or FSUIPC. Bert
    2 points
  4. I don’t think it is possible or recommend to use FSE or any other third party load manager to directly load fuel or pax/cargo into the CRJ. The Aerosoft CRJ uses a highly customized layout of weight stations and CG, and the EFB load menu is the only way to insure that the load will be put in the proper places. FSEconomy is probably corrupting the weight and CG which would account for the poor flight characteristics. I have not used FSE - is there any way to set it up to give you a text readout of total pax/cargo/fuel load, but prevent it from actually trying to load the aircraft? You could then use the EFB to enter the actual passengers and fuel. Default passenger weight is 185 pounds.
    1 point
  5. I think you are doing a few things wrong. Firstly anti ice should be off unless it is needed. Anti ice takes bleed air from the engine so reduces available thrust needed for the climb. Second, why was throttle at max? This will over stress the engine. You should use toga up to around 3000 ft and then climb detent up to your cruise. You should also set climb speed of 250 up to 10000 and then 290 up to cruise and then around 300 for cruise. Dont let speed fall otherwise nose pitches up and very difficult to rectify without turning off AP and pitching down.
    1 point
  6. Hallo, die folgenden Produkte wurden im Shop aktualisiert: Bestandskunden können die neue Vollversion über Ihr Aerosoft Shop Konto herunterladen. --------------------------------------------------------------------------- Traffic Global for XPlane 11 (Windows) AS14828 New version: 1.1.0010 Traffic Global for XPlane 11 (Mac) AS14962 New version: 1.1.0010 New file size: 2.1 GB Change log: https://support.justflight.com/support/solutions/articles/17000096700-traffic-global-xp11-changelog Gruß Heinz
    1 point
  7. Didn't think about it. Will try. Tks
    1 point
  8. Just wait until someone will find a way to mine Ethereum with the Bravo...
    1 point
  9. Juhu Namensvetter Gibt es denn schon einen groben Horizont wann wir dieses Meisterwerk endlich im MSFS verwenden können??
    1 point
  10. Eduardo: Correct, but as Bert correctly pointed out, this does only concern the buttons, not axis. You also have to make sure, that you don't have double bindings defined, that is, the same button mapped to something in the HC Configurator, as well as P3Ds control menu. Think of them as two distinct systems that don't talk to each other at all where you have to make sure they don't conflict. Every profile you downloaded from somewhere, should be imported via tha "Import" function currently (version 2.1) found under "Actions->Open Settings". In the next version (2.2), this will be moved to "Profiles" for a clearer ui ordering. Afterwards, you can load and activate it, which will bring it into your sim. I don't understand this question.
    1 point
  11. Is there gonna be a problem for the airbus tca quadrant for the beta range thing?
    1 point
  12. Last reports are positive... Keep in mind we have to submit to Microsoft before we can release the update.
    1 point
  13. Feels like we are in Groundhog Day, what are you trying to do over and over again, selling me some software. I gave my piece of mind in previous posts. Aerosoft needed to adapt to the way MSFS throttles interact with addons, it's done, in beta now, might be delayed with SU later this month, we will see, I hope for a release in a couple of week max. Did you really need to write the last part? Now I understand your low reputation on this forum. Let's keep focus on the throttle issue, we are done here.
    1 point
  14. I think the point here is that it’s just not a big deal. Maybe it doesn’t work exactly as expected but I think a margin of even 100Kg is just not worth making a fuzz about this. Your question is answered in multiple ways now. You wanted to know how it works and where you could find information about it and you were pointed to all there is at this moment. You shouldn’t feel bad for asking that. But you should also see that you keep insisting on things that were already answered to the maximum degree possible. And to keep asking over and over again won’t bring new answers and could be perceived a bit … well … annoying (also calling the devs lazy won’t get you anywhere )
    1 point
  15. Hi Ben, I tried copying and exporting the files to a different location and used different names. In all cases, the files are grey when using the import file selection, as described above. Thanks for looking into this. It sounds like you may have also found the problem already, but wanted to close out your question. I'm happy to be a tester for you before sending out a general release. Or, if you need to turn on any tracing on the app. I used to be a developer long ago, and understand the challenge with testing on multiple OS's and configurations. Mike
    1 point
  16. Bizjet in Zurich...a good place to visit your money... [Click to Enlarge] Thanks for viewing & commenting, Darryl
    1 point
  17. Kind of hotfix would be great addressing this issue and the rest of the update stuff maybe treated seperately. Looking forward to fly this plane normally
    1 point
  18. Aerosoft said they had a fix. When will it be released waited now for 4 month. They have my money but I do not have a working aircraft? I believe this will be the last purchase from Aerosoft I am writing it off as a bad decision. Using the CRJ 4 with the mod. Works like a charm.
    1 point
  19. A Different Kind of Robin. Click to Enlarge Image if you wish. Thanks for viewing & commenting, Darryl
    1 point
  20. Same issue here. And in my case recent update did no good, got even worse. In plane re-calibration helped a bit, but still situation unacceptable.
    1 point
  21. So I just made a quick video on the wind noise I hear with the hints of @FW. Schultz this does not sound right to me either and feels just like I left a window or the door open.
    1 point
  22. Yes, to me at least, it sounds as if the external wind noise is playing whilst in the cockpit. I have to also agree that the dismissive and to be honest arrogant attitude of some people is not helpful. Whether this wind noise is by design or not, we are just providing feedback. Thanks
    1 point
  23. Hello Bob, I have reinstalled Vector, but this time I had a look at the "Configure, Airport Elevation Corrections, Auto Configuration". And it worked... Now I have Vector installed and Stuttgart Airport is correctly displayed. Thanks again, Domingos
    1 point
  24. Almost same position. Of course landing lights and taxi light is turned on. Just move little bit away
    1 point
  25. Naturally. That is the easiest way. The customer cancels the order. No. First I put Aerosoft on default. Then I will claim damages for non-performance.
    -1 points
  26. Wow …. And it is not even a system limitation since you can CHOOSE to just upload the Aerosoft patch on your website with no issue at all. It is stand alone and no NEED to wait on Microsoft at all. I would rather have bought on the market-store in that case … that was the whole intention of the PRE-RELEASE questions your customers had on where to buy. This is really disappointing i must say.
    -1 points
×
×
  • Create New...