Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 07/22/20 in all areas

  1. 1.) You start a dicussion in this Support forum, because you expect that someone takes the time to help you with the issues you have. But you don't even spend a minute to declare your Question in the Titel of the thread, so that the reader can see, about what product and problem the discuss is started. He needs to open and read it, to see that this dicussion is not general P3D5 related, as you title "P3d5" suggests. 2.) You talk about "mega Heathrow airport", such a product does not exists in the Shop. When you search for this title in the shop, you will see, that there are two products existing: a) Mega Airport London Heathrow Xtended b) Mega Airport London Heathrow professional When you have the first one installed in P3DV5, it is simple the wrong product for the Sim. But how should we know that, if you don't take the time to make a clear statement about the product, your issue is adresssed too and that best direct in the Titel, like "Color issue P3DV5 with Mega Airport London Heathrow Professional", then everybody knows, about what you want to talk. As the Otto (Mopperle) has ask you yesterday in the other thread: - a screenshot would help us to understand what you see You not react on this important question. Nowbody here knows, what you see on your screen. So nowbody can compare what you have, with what we see on our screens to make a desition, if it is maybe a issue on your PC, that the scenery is displayed not as design too. To make a screenshot in P3D V5 is easy and needs seconds: - Set the Image format in the Menu Options->General "Screenshot Format" to JPG, as this is the best format to post/attach here. - Then press the Key V and you find the related JPG Picture in the Pictures\Prepar3D v5 Files folder of you PC - Then move the file into the "Drag files here to attach" zone below this editor frame. Now to your statments about the "wrong" Colors you seams to see: The Scenery is design based on hundreds of Photos taken by the developer on the Apron in Heathrow by a tour with the Airport Administration, so he had a good base to transfer the look and feel into his Flightsim Product. Based on this, the compare of there real world Photo in Google Maps and the top down view of the P3D V5 simulator looks very near simular. That the Sat photo is maybe a littlebit darker then the day view with full sun in P3D is not a bug of the scenery, it's limit of Photos. When you check older Sat photos in Google Earth, you will have much lighter Grounds here: So, what is the truth? But the oil marks at the round of the Gate are all present in the scenery and much more intensive, then on all pictures of the "real" world. And how the objects and ground Texture are displayed in the Simulator, depents much on the HDR Setting you have selected. The default HDR brightness Value of 1.0 in P3D under Options->Graphics->Lighting will result in a cross-fadingover of any light surfaces in the simulator. When you monitor brightness is also to high, it maybe looks not realistic at all. HDR Brightness Values of 0.7-0.8 could be generate better results here. Colors of the vegitation around the airport: All trees you see direct at and around the airport above the photoreal ground, as also the Trees of the P3D V5 landclass area around, are not part of the Scenery product, they are simple Autogen tree the Simulator provides. In Summer, there is no "lightgreen" tree visible here, not direct in the near to the airport, not is the default are behind: Not even in Spring, where the young green is much lighter in real life, the trees are still "medium green" here: But, when I switch on the option "Dynamic 3D Autogen Vegetation" in the Options-> World Menü and RESTART the sim to activate it, then I get a result, where we can talk about light green trees: But this is not limited to the airport area, it's all over the sim and this is not a issue of the addon, it's a "feature" of the P3D Simulator and should be discussed with Lookheed Martin or the "Speedtree" developers. So, based on the limited info you gave to your statement, that you are "disappointed" about the colors of the "mega Heathrow airport" addon, it is not reproduceable here, so no need for any investigations to change anything here. Every person has different perceptions of the world, which can lead to different impressions from person to person.
    3 points
  2. This post cannot be displayed because it is in a password protected forum. Enter Password
  3. There is more of a transition from Boeing to Airbus than one might imagine, and I clearly remember my own transition about 12 or so years ago and thinking I would go from a far less automated aircrash (lol) to a very automated one without any issues at all. Boy, did I learn my lesson. While the Airbug can be more automated than the Boeing, it's also an entirely different design philosophy which goes far below the lights out = normal part. The Airbus has a FADEC so you may move the thrust levers but really the best way to fly it is placing the levers in the Climb Detent after departure and inserting the speed. Manual control of thrust will lag a bit compared to the Boeing so be prepared for that. Trim is completely different in the Airbus. In the A320 side-stick is fly by wire and the pilot doesn't feel when trim is needed because, in normal law (which is what we modeled) the ELACs (computers) will adjust the elevator and stabilizer to achieve a neutral position for the side stick. Again, unlike Boeing and because this is a fly by wire aircraft, you'll find the trim wheel also lacks a mechanical link and instead in provides input to the ELACs to adjust adjust trim - but not in the Normal mode as that is automated. So, hands off the trim after you've setup for departure. Along with the product we provide an excellent introduction to the Airbus (Vol8-Weird and Wonderful Logic) which is very helpful for guys transitioning from a Boeing to the Airbus. I hope this is helpful to you! Best wishes.
    1 point
  4. Ich frag mich gerade, warum ich die ganzen die Werte hier eigentlich reingestellt habe...
    1 point
  5. 1 point
  6. Nein. Damit wird das nicht passen... Das muss bei Simbrief rein:
    1 point
  7. 1 point
  8. Nene... die Zibo hat den richtigen Wert, auf Basis der hinterlegten Gewichte. Simbrief passt Standard mäßig nicht. Der Wert ist falsch. Außer du passt Simbrief an die Zibo an, aber nicht umgekehrt. Jo, mehr iss es nicht, alles andere war doch prima... auch die Landung
    1 point
  9. This post cannot be displayed because it is in a password protected forum. Enter Password
  10. This post cannot be displayed because it is in a password protected forum. Enter Password
  11. the DIR INTC page just shows you what's what, it's an awareness tool more than a planner. The RJ-900 in the real world is typically capable of 3.5deg at idle for the most part. With a 50 knot headwind this can increase to 4.0deg path at idle, so you're right in the ballpark for what this plane usually does. I personally plan 3.5s with the real plane, unless it's a reasonably "busy" STAR, then i'll back it off to 3.0 just to make life easier with how most STARs are built, but at 3.0 you'll be flying a power-on descent. As for 3500fpm or 3800fpm in a descent, that's a little steep. Generally the above slopes require 2800-3000FPM in the initial descent. 3200 would be considered aggressive for us, and that obviously decreases as the TAS decreases in the descent.
    1 point
  12. The error is to do with the Microsoft Visual C++ 2015 Redistributable. Try a repair or download which should auto repair it. (64 and 32bit may be required)
    1 point
  13. See Chapter 4 about home cockpits and multi monitor. Announced by Asobo : https://youtu.be/eLcSNppK14ks://youtu.be/eLc
    1 point
  14. Indeed, as far as I know, nothing has been officially announced on that (also not on multi-monitor!). So I would not assume any of this is in the first release. As I said before, this is not FS2020, this is Microsoft Flight Simulator. A completely new platform, not an update.
    1 point
  15. Na ja, die CPU ist schon okay und mit einer vernünftigen Grafikkarte und mehr Speicher geht da durchaus noch was. Ich verstehe gar nicht, warum soviele Leute immer zum Geldverbrennen raten, habe da aber eine Theorie, die ich besser für mich behalte. 🙂
    1 point
  16. MFS is a brand new technology, so do not expect any compatibility with addons based on a over 15 year old technology. And this applies to all addons, not only Aerosoft.
    1 point
  17. Let me be blunt: your anti-virus software sucks big time. I'm not going to recommend anything, but many of the leading PC publications say that the default Windows Defender is surprisingly good and gave it top marks.
    1 point
  18. Noticed that in my build as well. It should be only a single push. Hopefully after the DEP/ARR FMS overhaul Hans can take a look
    1 point
  19. Hello, I have a big problem with Livery Manager. Its just does not work. After I click on LM, Net Framework comes up with error, after I click on continue the LM shows up, but I cant see any aircraft or livery. If I want to instal livery, comes another error says "No Product and aircraft could be found for use for this livery" What should I do?
    1 point
  20. How dear you talk to me like that who do you think you are, I was asking a question not to get a rude reply, the main question was the ground colours, Go to Heathrow egll take a picture of the taxi ways and gate and stands your description of ground is nothing like the real airport, ps why should I have to adjust the very bright tree’s in the first place if you get your colours right in the first place, so don’t be rude ok, remember the customer is always right sir he pays your bills got it, thanks D Haynes.
    -1 points
  21. I have P3d 5 at mega Heathrow airport doing a flight, I am disappointed with the colours in the airport when at the gate the ground looks to blue grey colour the taxiways at the same and yes I know you can adjust the settings there is not much difference, with the new 2020 coming out soon I hope they are better I am looking for realism, and the last one is the tree’s very bright green in the inner around the airport tried in options taking out 3D veg but know good, ps nobody as been rude except yourself with your comments now that I have explained what’s wrong please let me know and it’s insulting moderating my messages, I am not a criminal sir D Haynes.
    -1 points
×
×
  • Create New...