Jump to content

DEF Cold and dark not working


Recommended Posts

Hello everyone,

I have a problem with the Bus to start in the selected Cold and Dark state by default. The "DEF" right of Cold and Dark is green. I don't have any user states or something like that.

It happens also with different liveries. Enignes are running and I have to press the LSK1L to load the Cold and drak manually.

Any suggestions or solutions appreciated!

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

it seems that something has happened with your installation. I think some files are missing especially those which we use to save the DEF states. Because you are able to manually load DARK & COLD it is not a problem of those custom1-4 files. So first we have to find out if this is just a problem of the ACFT STATES or a general problem with saving default settings. Did you also make some other general settings in the right MCDU p. e. in the OPTIONS - CHECKLIST menu. If not please try to make some settings. Then please close FSX and restart it again..... Please report if those settings work or are just "green" only......

Regards,

Hanse

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

we should check if the DEF variables have been really saved. Please look into the folder C:\User\Your name\Own Documents\Aerosoft\AerosoftAirbusExtended\ for the file "setup.abx". Open it using the Editor. Then try to find the following entry (nearly at the end of the list)

set1_AB_ACFTState_Default=1.000000

The value for Dark & Cold should be 1.000000.

Hanse

Link to comment
Share on other sites

Hello,

In my experience setting Cold & Dark as default works, but only when I start a flight from the FSX opening screen (i.e. choose aircraft, location etc.). However if I save a flight in the cold state, then next time I load this flight, I have the same issue as Daniel. I checked my setup.abx file and found that the value for ACFTState_Default is 1.000000. I can live with this (hitting LSK1L) every time I load a saved flight, but it would be more comfortable to have the bus cold and dark in all start up circumstances, once this state has been set as default.

Regards,

René

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi René,

I cannot reporoduce your problem i. e. using both ways you described on my systems it works as required...... So the only way I can think of why this is different on your system might be the folder structure because saved flights are located in another folder than the AXE settings......

Saved flights on my system are located in C:\User\Your Name\Own Documents\Flight Simulator X Files

whereas the AXE seetings are located in C:\User\Your Name\Own Documents\Aerosoft\AersoftAirbusExtended

This means that C:\User\Your Name\Own Documents should be the same for both file types. Please check......

Hanse

Link to comment
Share on other sites

Hello Hanse,

Thanks for the reply. My folder structure (checked) is the same as yours. So, when you cannot reproduce what I described (I wouldn't really call it a problem), the cause of it must be something else. Could of course also be something I am doing wrong, but I can't yet figure out what. Maybe it has something to do with my settings of the situation (in the bus that is) before I save the flight. I'll try another 'workflow' and will let you know.

Regards,

René

Link to comment
Share on other sites

Hi Daniel,

we should check if the DEF variables have been really saved. Please look into the folder C:\User\Your name\Own Documents\Aerosoft\AerosoftAirbusExtended\ for the file "setup.abx". Open it using the Editor. Then try to find the following entry (nearly at the end of the list)

set1_AB_ACFTState_Default=1.000000

The value for Dark & Cold should be 1.000000.

Hanse

Hello Hanse,

I don't use saved flights at all. So just choose aircraft, airport, time in freeflight and go.

I checked the above. The file is in the location you stated above and this "set1_AB_ACFTState_Default=1.000000" entry is present in the setup.abx file.

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

so the next step is to find out, if DEF with the other ACFT STATES is working or if it is just a problem of DARK&COLD. Please set also DEF to the TAXI as well as to the TAKEOFF states and try if those are working i.e. if you then load an AXE that they are loaded wth the respective state......

Hanse.

Link to comment
Share on other sites

I just tried to load the "TAXI STATE" as default. Not working. It loads the State that comes with the installation. I'm able to load all the states manually, but not as default...

Deteails of the state that loads after loading a flight:

- engines running

- all displays ON

- no smoking and seatbelts OFF

- all lights OFF (interior, exterior and EMER EXIT LT)

- anti skid OFF

- irs NAV

- Master Caution LIGHT (because of the anti skid)

- flaps UP

- spoilers OFF

- auto brake OFF

- ignition NORM

- parking brake OFF

- swqk 1200

- fuel a shade above 19t

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

now I am out of options....... and have no idea what could cause such a behaviour...... we have already checked that all files are in the right folder, the DEF settings are saved and if you can manually load all three states it means those specific files are also available. So unfortunately the only advice I can give you is to uninstall (not delete) the AXE and to reinstall it again (as administrator).......Maybe this fixes the problem........I am really interested to know the result......

Hanse

Link to comment
Share on other sites

OK. Here is what I did:

1. uninstall the Airbus as an administrator

2. start FSX and load the default flight, close FSX

3. install the Airbus (1.04) again as an administartor, restart the computer

4. start FSX and load the Airbus an set the default state to Cold and Dark, close FSX

5. start FSX and load the Airbus AND it doesn't work...

6. install Hotfix 011, start FSX and load the Airbus AND it doesn't work

I don't know what else to try...

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

could you please send me

  • a screenshot of your folder structure (like attached) so that I can check which files are available / missing
  • as well as a copy of your setup.abx file

Hanse

post-30406-0-86677600-1360434036_thumb.j

Link to comment
Share on other sites

Ok. Here is a screenshot of the folder you wanted.

aerosoft1.gif

I noticed, that I have 26 items instead of the 29. But don't know wich one is missing.

Unforunately the Uploader says I'm not allowed to upload this kind of files, when trying to upload the setup.abx

I will copy and paste it in the next post then.

Link to comment
Share on other sites

[Variables_Set1]

set1_Sidewindow_pos_CP=0.000000

set1_Sidewindow_pos_FO=0.000000

set1_Sidewindow_open_CP=0.000000

set1_Sidewindow_open_FO=0.000000

set1_Sidewindow_close_CP=0.000000

set1_Sidewindow_close_FO=0.000000

set1_Table1_pos=0.000000

set1_Table1_open=0.000000

set1_Table1_close=0.000000

set1_Jumpseat_open=0.000000

set1_Jumpseat_close=0.000000

set1_Sunshade1_open=0.000000

set1_Sunshade1_close=0.000000

set1_Sunshade2_open=0.000000

set1_Sunshade2_close=0.000000

set1_Aileron_droop=0.000000

set1_AB_SECURITYSCREEN_SWITCH=0.000000

set1_AB_Cabindoor3=0.000000

set1_AB_Cabindoor4=0.000000

set1_APU_DOOR_ANIM=0.000000

set1_AB_SPOILER1_L=0.000000

set1_AB_SPOILER2_L=0.000000

set1_AB_SPOILER3_L=0.000000

set1_AB_SPOILER4_L=0.000000

set1_AB_SPOILER5_L=0.000000

set1_AB_SPOILER1_R=0.000000

set1_AB_SPOILER2_R=0.000000

set1_AB_SPOILER3_R=0.000000

set1_AB_SPOILER4_R=0.000000

set1_AB_SPOILER5_R=0.000000

set1_AB_PDS_Eng1Master=0.000000

set1_AB_PDS_Eng2Master=0.000000

set1_AB_PDS_ignition=0.000000

set1_Button_Power_Avail=0.000000

set1_LightTest=0.000000

set1_LightSwitch=0.000000

set1_AB_OVH_WIPERL_KNOB=0.000000

set1_AB_OVH_WIPERR_KNOB=0.000000

set1_AB_OVH_HYDL=0.000000

set1_AB_OVH_HYDR=0.000000

set1_AB_OVH_HYDELEC1=0.000000

set1_AB_OVH_HYDELEC2=0.000000

set1_AB_OVH_HYDL_FAULT=0.000000

set1_AB_OVH_HYDR_FAULT=0.000000

set1_AB_OVH_HYDELEC1_FAULT=0.000000

set1_AB_OVH_HYDELEC2_FAULT=0.000000

set1_AB_OVH_HYDELEC1_COVER=0.000000

set1_AB_OVH_HYDPTU=0.000000

set1_AB_OVH_HYDPTU_FAULT=0.000000

set1_AB_OVH_FUELPL1=0.000000

set1_AB_OVH_FUELPL2=0.000000

set1_AB_OVH_FUELPR1=0.000000

set1_AB_OVH_FUELPR2=0.000000

set1_AB_OVH_FUELPCL=0.000000

set1_AB_OVH_FUELPCR=0.000000

set1_AB_OVH_FUELPL1_FAULT=0.000000

set1_AB_OVH_FUELPL2_FAULT=0.000000

set1_AB_OVH_FUELPR1_FAULT=0.000000

set1_AB_OVH_FUELPR2_FAULT=0.000000

set1_AB_OVH_FUELPCL_FAULT=0.000000

set1_AB_OVH_FUELPCR_FAULT=0.000000

set1_AB_OVH_FUELXF=0.000000

set1_AB_OVH_FUELXF_OPEN=0.000000

set1_AB_OVH_FUELMODE=0.000000

set1_AB_OVH_FUELMODE_FAULT=0.000000

set1_AB_OVH_ELECBAT1=0.000000

set1_AB_OVH_ELECBAT2=0.000000

set1_AB_OVH_ELECBAT1_FAULT=0.000000

set1_AB_OVH_ELECBAT2_FAULT=0.000000

set1_AB_OVH_ELECGENL=0.000000

set1_AB_OVH_ELECGENR=0.000000

set1_AB_OVH_ELECGENL_FAULT=0.000000

set1_AB_OVH_ELECGENR_FAULT=0.000000

set1_AB_OVH_ELECGENAPU=0.000000

set1_AB_OVH_ELECGENAPU_FAULT=0.000000

set1_AB_OVH_ELECEXT=0.000000

set1_AB_OVH_ELECEXT_AVAIL=0.000000

set1_AB_OVH_ELECEXT_ON=0.000000

set1_AB_OVH_ELECBT=0.000000

set1_AB_OVH_IDG1=0.000000

set1_AB_OVH_IDG2=0.000000

set1_AB_OVH_IDG1_COVER=0.000000

set1_AB_OVH_IDG2_COVER=0.000000

set1_AB_OVH_IDG1_LIGHT_FAULT=0.000000

set1_AB_OVH_IDG2_LIGHT_FAULT=0.000000

set1_AB_OVH_AC_ESS_FEED=0.000000

set1_AB_OVH_AC_ESS_FAULT=0.000000

set1_AB_OVH_PNEUBLEEDL=0.000000

set1_AB_OVH_PNEUBLEEDR=0.000000

set1_AB_OVH_PNEUBLEEDL_FAULT=0.000000

set1_AB_OVH_PNEUBLEEDR_FAULT=0.000000

set1_AB_OVH_PNEUBLEEDAPU=0.000000

set1_AB_OVH_PNEUBLEEDAPU_FAULT=0.000000

set1_AB_OVH_PNEUXBLEED=0.000000

set1_AB_OVH_PNEUPACKL=0.000000

set1_AB_OVH_PNEUPACKR=0.000000

set1_AB_OVH_PNEUPACKL_FAULT=0.000000

set1_AB_OVH_PNEUPACKR_FAULT=0.000000

set1_AB_OVH_HOTAIR=0.000000

set1_AB_OVH_HOTAIR_FAULT=0.000000

set1_AB_OVH_ZONETEMP1=0.000000

set1_AB_OVH_ZONETEMP2=0.000000

set1_AB_OVH_ZONETEMP3=0.000000

set1_AB_OVH_ANTIICE_WING=0.000000

set1_AB_OVH_ANTIICE_WING_FAULT=0.000000

set1_AB_OVH_ANTIICE_ENGL=0.000000

set1_AB_OVH_ANTIICE_ENGR=0.000000

set1_AB_OVH_ANTIICE_ENGL_FAULT=0.000000

set1_AB_OVH_ANTIICE_ENGR_FAULT=0.000000

set1_AB_OVH_ANTIICE_PROBEWINDOW=0.000000

set1_AB_OVH_APU_MASTER=0.000000

set1_AB_OVH_APU_MASTER_LIGHT_FAULT=0.000000

set1_AB_OVH_APU_START=0.000000

set1_AB_OVH_APU_START_LIGHT_AVAIL=0.000000

set1_AB_OVH_SEATBELT=0.000000

set1_AB_OVH_NO_SMOKING=0.000000

set1_AB_OVH_EMER_LT=0.000000

set1_AB_OVH_EMER_Button=0.000000

set1_AB_OVH_LIGHTS_ANN_TEST=0.000000

set1_AB_MPL_FD=0.000000

set1_AB_MPL_ILS=0.000000

set1_AB_MPL_ND_CSTR=0.000000

set1_AB_MPL_ND_WPT=0.000000

set1_AB_MPL_ND_VOR=0.000000

set1_AB_MPL_ND_NDB=0.000000

set1_AB_MPL_ND_ARPT=0.000000

set1_AB_MPL_ND_TERR=0.000000

set1_AB_MPL_Baro_Unit=0.000000

set1_AB_MPL_Baro_set=0.000000

set1_AB_MPL_Baro_STD=0.000000

set1_AB_MPL_HDG-TRK=0.000000

set1_AB_MPL_ND_Mode=0.000000

set1_AB_MPL_ND_Range=0.000000

set1_AB_MPL_ND_Arrow1=0.000000

set1_AB_MPL_ND_Arrow2=0.000000

set1_Mod_Xponder_mode=0.000000

set1_AB_STDBYCompass_anim=0.000000

set1_AB_AP_SPDMACH_but=0.000000

set1_AB_AP_SPDMACH=0.000000

set1_AB_AP_SPDmode=0.000000

set1_AB_AP_SPEEDset=0.000000

set1_AB_AP_HDGmode=0.000000

set1_AB_AP_HDGset=0.000000

set1_AB_AP_HDGTRK_but=0.000000

set1_AB_AP_HDGTRK=0.000000

set1_AB_AP_ALTmode=0.000000

set1_AB_AP_ALTset=0.000000

set1_AB_AP_ALTSTEP=0.000000

set1_AB_AP_LOC=0.000000

set1_AB_AP_LOC2=0.000000

set1_AB_AP_EXP=0.000000

set1_AB_AP_AP1=0.000000

set1_AB_AP_AP2=0.000000

set1_AB_AP_ATHR=0.000000

set1_AB_AP_VSlevel=0.000000

set1_AB_AP_VSset=0.000000

set1_Mod_Com_Both1=0.000000

set1_Mod_Com_Both2=0.000000

set1_ADF2_toggle=0.000000

set1_Mod_Markertest=0.000000

set1_AB_MPL_Master_Warning=0.000000

set1_Flightmode=0.000000

set1_AB_ECAM_TOconf=0.000000

set1_TO_firststartbypass=0.000000

set1_TO_Memo_normal=0.000000

set1_LDG_Memo_enable=0.000000

set1_LDG_Memo=0.000000

set1_EngL_Oil_qty=0.000000

set1_EngL_Oil_qty_target=0.000000

set1_EngR_Oil_qty=0.000000

set1_EngR_Oil_qty_target=0.000000

set1_Flaps_handle_index_hist=0.000000

set1_Flap1_mode=0.000000

set1_MCDU_cones=0.000000

set1_MCDU_Wheelchocks=0.000000

set1_AB_OVH_PACKFLOWCTR=0.000000

set1_PackturboutL_Temp=0.000000

set1_PackturboutR_Temp=0.000000

set1_PackfinalL_Temp=0.000000

set1_PackfinalR_Temp=0.000000

set1_Hotaircontrolvalve_auto_close=0.000000

set1_AB_OVH_ZONETEMP1_target=0.000000

set1_AB_OVH_ZONETEMP2_target=0.000000

set1_AB_OVH_ZONETEMP3_target=0.000000

set1_AB_OVH_ZONETEMP1_disp=0.000000

set1_AB_OVH_ZONETEMP2_disp=0.000000

set1_AB_OVH_ZONETEMP3_disp=0.000000

set1_BleedL_Pressure=0.000000

set1_BleedR_Pressure=0.000000

set1_EngL_bleedair=0.000000

set1_EngR_bleedair=0.000000

set1_Eng1_HP_Valve=0.000000

set1_Eng2_HP_Valve=0.000000

set1_BleedL_Ptarget=0.000000

set1_BleedR_Ptarget=0.000000

set1_XBleed_Valve=0.000000

set1_APU_Bleedair=0.000000

set1_APU_Bleedair_Pressure=0.000000

set1_DC_BATBUS_Avail=0.000000

set1_BAT_HOTBUS1_Avail=0.000000

set1_BAT_HOTBUS2_Avail=0.000000

set1_APUGENSTATE=0.000000

set1_APU_avail=0.000000

set1_EXT_Avail=0.000000

set1_AC1_Conf=0.000000

set1_AC2_Conf=0.000000

set1_AC_ESS_Avail=0.000000

set1_DC1_Avail=0.000000

set1_DC2_Avail=0.000000

set1_DC_ESS_Avail=0.000000

set1_IDG1_Temp_set=0.000000

set1_IDG1_Temp_current=0.000000

set1_IDG2_Temp_set=0.000000

set1_IDG2_Temp_current=0.000000

set1_APU_Load=0.000000

set1_EMER_Avail=0.000000

set1_ENG1_N1_2min=0.000000

set1_ENG2_N1_2min=0.000000

set1_Centertank_low_level=0.000000

set1_Centertank_lo_level_timer_start=0.000000

set1_Centertank_lo_level_set=0.000000

set1_Centertank_lo_level_val=0.000000

set1_Fuel_Tank_center_qty_check=0.000000

set1_Fuel_leftinner_qty=0.000000

set1_Fuel_leftouter_qty=0.000000

set1_Fuel_rightinner_qty=0.000000

set1_Fuel_rightouter_qty=0.000000

set1_Fuel_temperature=0.000000

set1_Fuel valve state=0.000000

set1_Hyd_press_mode=0.000000

set1_Green_hyd_press_avail=0.000000

set1_Green_hyd_press_target=0.000000

set1_Blue_hyd_press_target=0.000000

set1_Yellow_hyd_press_avail=0.000000

set1_Yellow_hyd_press_target=0.000000

set1_Green_Pressure=0.000000

set1_Blue_Pressure=0.000000

set1_Yellow_Pressure=0.000000

set1_HYD_RSVR_PRESS_target=0.000000

set1_HYD_G_RSVR_PRESS=0.000000

set1_HYD_Y_RSVR_PRESS=0.000000

set1_HYD_B_RSVR_PRESS=0.000000

set1_ASC_Autobrake_position=0.000000

set1_AB_BRK_FAN=0.000000

set1_Left1_wheel_temp_target=0.000000

set1_Left2_wheel_temp_target=0.000000

set1_Right3_wheel_temp_target=0.000000

set1_Right4_wheel_temp_target=0.000000

set1_Left1_wheel_temp=0.000000

set1_Left2_wheel_temp=0.000000

set1_Right3_wheel_temp=0.000000

set1_Right4_wheel_temp=0.000000

set1_Gearpos_hist=0.000000

set1_ASC_Antiskid=0.000000

set1_Left_wheel_RPM_hist=0.000000

set1_Right_wheel_RPM_hist=0.000000

set1_Wheel_decel=0.000000

set1_Flightmode_5to6_starttimer_start=0.000000

set1_Flightmode_5to6_set=0.000000

set1_Flightmode_5to6_starttimer_val=0.000000

set1_Flightmode_5to6_2min=0.000000

set1_Ecam_APU_Mode_hist_set=0.000000

set1_ECAM_APU_Mode_hist=0.000000

set1_ECAM_CALL_MODE_hist=0.000000

set1_ECAM_APU_mode=0.000000

set1_ECAM_APUM_starttimer_start=0.000000

set1_ECAM_APUM_starttimer_val=0.000000

set1_ECAM_ENGM_starttimer_start=0.000000

set1_ECAM_ENGM_set=0.000000

set1_ECAM_ENGM_starttimer_val=0.000000

set1_ECAM_ENG_Mode_hist=0.000000

set1_Ecam_ENG_Mode_hist_set=0.000000

set1_ECAM_Mode=0.000000

set1_ASC_Landinggear=0.000000

set1_ASC_Parkbrake=0.000000

set1_ASC_Beaconlight=0.000000

set1_ASC_Strobelight=0.000000

set1_ASC_Panellight=0.000000

set1_ASC_Markersound=0.000000

set1_ASC_Spoiler_Pos=0.000000

set1_ASC_Spoiler_armed=0.000000

set1_ASC_Flaps_Pos=0.000000

set1_ASC_Throttlepos_L=0.000000

set1_ASC_Throttlepos_R=0.000000

set1_ASC_Elevatortrim=0.000000

set1_ASC_Ailerontrim=0.000000

set1_ASC_Ruddertrim=0.000000

set1_ASC_Com1_Afrq=0.000000

set1_ASC_Com2_Afrq=0.000000

set1_ASC_Com1_Sfrq=0.000000

set1_ASC_Com2_Sfrq=0.000000

set1_ASC_Nav1_Afrq=0.000000

set1_ASC_Nav2_Afrq=0.000000

set1_ASC_Nav1_Sfrq=0.000000

set1_ASC_Nav21_Sfrq=0.000000

set1_ASC_ADF1_Afrq=0.000000

set1_ASC_ADF2_Afrq=0.000000

set1_ASC_Xpondernumber=0.000000

set1_ASC_Navsound1=0.000000

set1_ASC_Navsound2=0.000000

set1_ASC_ADFsound1=0.000000

set1_ASC_ADFsound2=0.000000

set1_AB_OVH_LIGHTS_RWYTURNOFF=0.000000

set1_Landlight_switch=0.000000

set1_AB_TAXI_LT=0.000000

set1_Strobe_light=0.000000

set1_AB_OVH_GPWS_TERR=0.000000

set1_AB_OVH_GPWS_SYS=0.000000

set1_AB_OVH_GPWS_GSMODE=0.000000

set1_AB_OVH_GPWS_FLAPMODE=0.000000

set1_AB_GPWS_MAIN_BUTTON=0.000000

set1_AB_AP_AP1_hist=0.000000

set1_AB_AP_AP2_hist=0.000000

set1_AP_OFF_Zkey=0.000000

set1_AB_AP_ATHR_hist=0.000000

set1_AB_AP_HDGmode_set=0.000000

set1_AB_AP_ALTmode_set=0.000000

set1_AB_AP_SPDmode_set=0.000000

set1_AB_AP_ALT_Select=0.000000

set1_AB_AP_ALT_Select_hist=0.000000

set1_AB_AP_HDG_Select=0.000000

set1_AB_AP_SPEED_Select=0.000000

set1_AB_AP_Mach_Select=0.000000

set1_Speed_Set=0.000000

set1_Mach_Set=0.000000

set1_AP_LOC_Mode_On=0.000000

set1_MCDU_Cruisealt=0.000000

set1_MCDU_VNAV_Start_Descend=0.000000

set1_AP_APPR_Mode_On=0.000000

set1_FCU_Takoff_set_HDG=0.000000

set1_FCU_Takoff_set_ALT=0.000000

set1_Throttle_ani_fix_L=0.000000

set1_Throttle_ani_fix_R=0.000000

set1_Throttle_ani_var_L=0.000000

set1_Throttle_ani_var_R=0.000000

set1_Max_rated_N1_L=0.000000

set1_Max_rated_N1_R=0.000000

set1_FMA_Latmode_act=0.000000

set1_FMA_Latmode_arm=0.000000

set1_FMA_Vertmode_act=0.000000

set1_FMA_Vertmode_arm=0.000000

set1_FMA_THRmode=0.000000

set1_FMA_THRmode_2nd_line_CLB=0.000000

set1_FMA_THRmode_2nd_line_ASYM=0.000000

set1_FMA_THRmode_2nd_line_THR_LK=0.000000

set1_ASC_AUTOPILOT MASTER=0.000000

set1_ASC_AUTOPILOT FLIGHT DIRECTOR ACTIVE=0.000000

set1_ASC_AUTOPILOT ALTITUDE LOCK=0.000000

set1_ASC_AUTOPILOT ALTITUDE LOCK VAR=0.000000

set1_ASC_AUTOPILOT VERTICAL HOLD VAR=0.000000

set1_ASC_AUTOPILOT HEADING LOCK DIR=0.000000

set1_ASC_AUTOPILOT AIRSPEED HOLD VAR=0.000000

set1_ASC_AUTOPILOT MACH HOLD VAR=0.000000

set1_ASC_AUTOPILOT NAV1 LOCK=0.000000

set1_ASC_AUTOPILOT HEADING LOCK=0.000000

set1_ASC_AUTOPILOT APPROACH HOLD=0.000000

set1_ASC_AUTOPILOT AIRSPEED HOLD=0.000000

set1_ASC_AUTOPILOT MACH HOLD=0.000000

set1_ASC_AUTOPILOT VERTICAL HOLD=0.000000

set1_ASC_AUTOPILOT THROTTLE ARM=0.000000

set1_ASC_GPS DRIVES NAV1=0.000000

set1_MCDU1_Page=0.000000

set1_Cones=0.000000

set1_Wheelchocks=0.000000

set1_MCDU_EXTPOWERCART=0.000000

set1_MCDU_EXTPOWER=0.000000

set1_MCDU_Fl=0.000000

set1_MCDU_Sl=0.000000

set1_MCDU_GrDot=0.000000

set1_MCDU_V1_ENT=0.000000

set1_MCDU_V1=0.000000

set1_MCDU_VR_ENT=0.000000

set1_MCDU_VR=0.000000

set1_MCDU_V2_ENT=0.000000

set1_MCDU_V2=0.000000

set1_MCDU_FLAPS_ENT=0.000000

set1_MCDU_FLAPS=0.000000

set1_MCDU_Transalt_ENT=0.000000

set1_MCDU_Trans_alt=0.000000

set1_MCDU_TOFLX_ENT=0.000000

set1_MCDU_TOFLX=0.000000

set1_MCDU_Ci_ENT=0.000000

set1_MCDU_Ci=0.000000

set1_MCDU_Speed_set=0.000000

set1_MCDU_TotalFuelburn=0.000000

set1_MCDU_APP_QNH_ENT=0.000000

set1_MCDU_APP_QNH=0.000000

set1_MCDU_APP_TEMP_ENT=0.000000

set1_MCDU_APP_TEMP=0.000000

set1_MCDU_APP_MDA_ENT=0.000000

set1_MCDU_APP_MDA=0.000000

set1_MCDU_APP_DH_ENT=0.000000

set1_MCDU_APP_DH=0.000000

set1_MCDU_APP_LDGCONF_ENT=0.000000

set1_MCDU_APP_LDGCONF_FULL=0.000000

set1_MCDU_APP_LDGCONF=0.000000

set1_VAPP_autocalc=0.000000

set1_MCDU_DEPARR_ENT=0.000000

set1_MCDU_FLTNMBR_ENT=0.000000

set1_MCDU_AlignIRS_ENT=0.000000

set1_MCDU_IRSAligned=0.000000

set1_MCDU_LAT_IRSaligned=0.000000

set1_MCDU_LON_IRSaligned=0.000000

set1_MCDU_CRZData_ENT=0.000000

set1_MCDU_Taxifuel_ENT=0.000000

set1_MCDU_Taxifuel=0.000000

set1_MCDU_ZFW_ENT=0.000000

set1_MCDU_ZFW=0.000000

set1_MCDU_BLOCK_ENT=0.000000

set1_MCDU_BLOCK=0.000000

set1_MCDU_RTERSV_ENT=0.000000

set1_MCDU_RTERSV=0.000000

set1_MCDU_FINALTM_ENT=0.000000

set1_MCDU_FINALTM=0.000000

set1_MCDU1_POS_Upd_Freeze=0.000000

set1_MCDU_VOR1Freq_ENT=0.000000

set1_MCDU_VOR2Freq_ENT=0.000000

set1_MCDU_VOR1CRS_ENT=0.000000

set1_MCDU_NAV1_CRS=0.000000

set1_MCDU_VOR2CRS_ENT=0.000000

set1_MCDU_NAV2_CRS=0.000000

set1_MCDU_ADF1Freq_ENT=0.000000

set1_MCDU_ADF2Freq_ENT=0.000000

set1_AB_PDS_RADIO_POWER=0.000000

set1_AB_MPL_ECAML_Power=0.000000

set1_AB_MPL_ECAMU_Power=0.000000

set1_AB_MPL_PFD_Power=0.000000

set1_AB_MPL_ND_Power=0.000000

set1_MCDU_descend_ready=0.000000

set1_ASC_Engines_running=0.000000

set1_ASC_Winglight=0.000000

set1_ASC_Navlight=0.000000

set1_ASC_Logolight=0.000000

set1_ASC_FBW_FAC_1=0.000000

set1_ASC_FBW_FAC_2=0.000000

set1_ASC_FBW_ELAC_1=0.000000

set1_ASC_FBW_ELAC_2=0.000000

set1_ASC_FBW_SEC_1=0.000000

set1_ASC_FBW_SEC_2=0.000000

set1_ASC_FBW_SEC_3=0.000000

set1_AB_Cabindoor3_toggle=0.000000

set1_AB_Cabindoor3_target=0.000000

set1_AB_Cabindoor4_toggle=0.000000

set1_AB_Cabindoor4_target=0.000000

set1_ASC_MCDU_cones=0.000000

set1_ASC_MCDU_Wheelchocks=0.000000

set1_ASC_MCDU_EXTPOWERCART=0.000000

set1_ASC_MCDU_EXTPOWER=0.000000

set1_ASC_Exit_0=0.000000

set1_ASC_Exit_1=0.000000

set1_ASC_Exit_2=0.000000

set1_ASC_Exit_3=0.000000

set1_ASC_Kohlsmann=0.000000

set1_AB_OVH_GPWS_LDGFLAP3=0.000000

set1_ASC_APU_avail=0.000000

set1_FBW_ELAC_1=0.000000

set1_FBW_ELAC_2=0.000000

set1_MCDU_approach_activate=0.000000

set1_Approach_auto=0.000000

set1_THR_RED_ACC=0.000000

set1_ASC_AB_SND_CAB=0.000000

set1_ASC_AB_SND_FC=0.000000

set1_ASC_AB_SND_ATC=0.000000

set1_ASC_AB_Enh_GPWS=1.000000

set1_ASC_Panelbar_Mode_2D=0.000000

set1_ASC_Panelbar_Snd_Mute=0.000000

set1_ASC_Panelbar_Left_Init=0.000000

set1_ASC_Panelbar_Off=0.000000

set1_ASC_Wingviewbar_On=0.000000

set1_AB_OVH_IRS1_KNOB=0.000000

set1_AB_OVH_IRS2_KNOB=0.000000

set1_AB_OVH_IRS3_KNOB=0.000000

set1_AB_OVH_IRS1_BUT=0.000000

set1_AB_OVH_IRS2_BUT=0.000000

set1_AB_OVH_IRS3_BUT=0.000000

set1_AB_OVH_ADR1=0.000000

set1_AB_OVH_ADR2=0.000000

set1_AB_OVH_ADR3=0.000000

set1_IRS1_Align_state=0.000000

set1_IRS2_Align_state=0.000000

set1_IRS3_Align_state=0.000000

set1_IRS_AlignPrompt_MCDU=0.000000

set1_IRS_Align_MCDU_LSK=0.000000

set1_IRS_Align_MCDU_enabled=0.000000

set1_IRS_AlignTime_Memo=0.000000

set1_IRS_Align_Memo=0.000000

set1_IRS1_AlignSet=0.000000

set1_IRS2_AlignSet=0.000000

set1_IRS3_AlignSet=0.000000

set1_IRS1_Align_timer_start_set=0.000000

set1_IRS2_Align_timer_start_set=0.000000

set1_IRS3_Align_timer_start_set=0.000000

set1_IRS1_Align_timer_start_val=0.000000

set1_IRS2_Align_timer_start_val=0.000000

set1_IRS3_Align_timer_start_val=0.000000

set1_IRS_ShowPos_MCDU=0.000000

set1_IRS_PFD_ND_Out=0.000000

set1_IRS_NOT_Align=0.000000

set1_ASC_AB_CL_Infobar=0.000000

set1_ASC_AB_AES_On=0.000000

set1_ASC_FBWAutoRudGnd=0.000000

set1_ASC_CP_App_Speedbrake=0.000000

set1_ASC_AB_250Kt_Limiter=0.000000

set1_ASC_AB_TOD_Pause_On=0.000000

set1_ASC_AB_NextWP_Pause_On=0.000000

set1_ASC_ViewSys_Off=1.000000

set1_ASC_Landinglight=0.000000

set1_ASC_AB_FDR_On=0.000000

set1_AP_FADEC_IDLTHR=0.000000

set1_AP_FADEC_CLBTHR=0.000000

set1_AB_AP_HDGmode_setDisp=0.000000

set1_AP_AP_ALT_Mode99=0.000000

set1_AP_AP_ALT_Mode=0.000000

set1_AB_AP_ALT_Selected_LOG=0.000000

set1_ASC_AB_AP_KNOBALT=0.000000

set1_AB_ACFTState_Default=1.000000

set1_AB_OVH_Dome_Light=0.000000

set1_ASC_CL_State=0.000000

set1_ASC_CL_HotKey_Off=0.000000

Link to comment
Share on other sites

In comparison to your folder the following files are missing:

- Prepared_Turnaround.asc

- UserSettings.fms

- Turnaround_NEW.abx

- AirbusXConnectExtended.log

- BeforeTakeoff.asc

- BeforeTaxi.asc

BUT in comparison to your folder, I have additional files:

- AsInput_Dual.ini

- FMGS1.dmp

- FMGS2.dmp

Hope it makes it a bit easier for you to find the needle in the haystack. ;)

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi Daniel,

thanks for your work. Comparing your folder with mine the differences on my side are clear because I am using a test version and we need some more files for logging...... But what I recognized is that there are files FMGS0, FMGS1 and FMGS2.dmp in your directory which have been created after your first installation and not been deleted during your deinstallation. Sorry this shows to me that the deinstallation was not complete ......for any reasons...... Maybe this happened also with other settings.......

So I suggest as the next step to uninstall AXE again. Please check after if the folder Own Documents\Aerosoft\AerosoftAirbusExtended is still available (should be because of the 3 a.m. files) and then delete it completely with its remaining content. Please check also if the 6 folders for the AXE in FSX\SimObjects\Airplanes have been deleted. If not also delete those folders. Now you should have a "clean" system for a new installtion .........I am pressing my thumbs......

Hanse

Link to comment
Share on other sites

You were right, the hole folder in "My documents" remaind there after uninstall. Deleted it manually and did a new installation.

Unfortunately were back at the start. In the right CDU, the Cold and Dark "DEF" is green, but every time a load a flight, the engines are running and the aircraft is in the state bescribed above.

I found out, when I load a flight with the airbus through the "freeflight" tab in FSX the engines are running. But when I press on "aircraft", "select aircraft" within the simulator and I load an Airbus, it starts in Cold and Dark.

Ich weiß nicht genau ob man den Satz versteht. Also wenn ich den Airbus über "Freiflug" auswähle, dann ist er nicht cold and dark. Aber wenn ich innerhalb des Sims auf "Luftfahrzeug auswählen" gehe und nochmal (z.B. ne andere Lackierung, aber egal welche, geht mit allen) lade, dann startet er im Cold and Dark. Halt nur nicht von Anfang an. Bin echt ratlos...

Link to comment
Share on other sites

  • Deputy Sheriffs

Hallo Daniel,

ich habe schon Dein Problem verstanden...... what I suggest is to confugure a "free flight" with the AXE, save it and make this your "default" flight - it is not necessary anymore to start the flight with one the default FSX planes ..... - Then just use "FLY NOW" (or previously change weather, location and time). Maybe this works ...... At least this is how I always start the FSX with the AXE and get it in "Dark&Cold".....

Hanse

Link to comment
Share on other sites

Good evening Hanse!

Unfortunately that didn't help. I loaded a flight with the Airbus, set the "cold and dark" state manually and saved it as default. Anyway, when I start FSX and press "Fly now" the engines are running.

I discovered that the aircraft loads the settings from "UserSettings.asc" according to the acs.cfg in the panel folder of the aircraft. So I made a backup of the UserSettings.asc and changed every value to 0.000000, as it is in the setup.abx.

It was not the solution. The aircraft did the same things as before...

Link to comment
Share on other sites

  • 2 weeks later...
  • Deputy Sheriffs

Hi Daniel,

I just experienced something similar´i.e. my dedault FSX flight loaded suddenly in a different than the DEF state. I do not knwo what happened. Then I loaded another FSX plane and saved the flight - also as an FSX default flight. Afterwards I completely newly defined a flight with the AXE and the DEF aircraft state. Again I saved it as the default FSX flight. And now it worked i. e. the AXE was loaded again with the DEF aircraft state. Maybe the reason was that the FSX settings overwrote the AXE settings in some way.

So maybe you should try again to newly define a flight with the AXE set it to your DEF aircraft state and then save it under a new name and make it to your FSX default flight.

Hanse

Link to comment
Share on other sites

  • Deputy Sheriffs

Hello, Mr Gravanis and Mr Hanse

I have such behaviour also. Sometimes It loads C&D, sometimes loads in ready to taxi, with the right MCDU greyed (then I have to reset the flight completely and load it again), sometimes (in previous versions, not with 1.04) with the debug green figures opened, sometimes in VC view, sometimes in panel CT view...

But just trying to help, I would look for "which items FSX saves to be the "default" and recalls every time, when FSX recalls them and when AXE recalls its own default". My bones feel that there is a "race" between FSX and AXE (and, perhaps, other add-ons), and depending which one performs later, we have one result or another. And may happen that depending the processor, the avaliable RAM and other uncontrolled items, we have different startup situations...

It is very interesting to have an add-on like FS-REALTIME that, when programmed to do so, resets a flight inmediately after having charged it to correct FSX time. Then you experiment a whole world of different "startup" situations.

Hope this give you something to think about.

Regards

..PD

Also, I have noticed that AXE loads always in "two steps". The first one is always a "hot" state, with the engines spooling, and then cames the C&D state. You can hear the engines "shut down" sounds while in C&D, and see them spinning if you go to an outside view.

Link to comment
Share on other sites

  • Deputy Sheriffs

Hi,

if you have this problem - and there are very few users like you - then maybe you are right and it depends on the system setup because we cannot reproduce it. We cannot look into the FSX coding (not possible from MS) but just have to use the FSX SDK features.

There is a way to find out if you are right. Save a flight (with a standard FSX plane) and make this to your default flight. Load it and then change the plane to the AXE. Does it then load in the DEF aircraft state?

Hanse

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use