Dave Eastwood 0 Posted December 18, 2022 Share Posted December 18, 2022 Hello there, I have an issue when I set the top left knob to Altitude in that the autopilot either engages or dis-engages and this happens on every profile that I have. I have checked in the configurator and can not see anything obvious as to why this happens. Does anyone have any ideas as to how I can solve this please? If more information is required then please ask? Thanks in advance Dave Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted December 18, 2022 Aerosoft Share Posted December 18, 2022 Hi, What simulator is in use ? What plane/addon is in use ? What are the knob assignments ? What profile (if applicable) did you load in the configurator ? Thank you. Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted December 19, 2022 Author Share Posted December 19, 2022 Hello, Simulator is P3Dv5.3 Plane is Aerosoft A320 Knob Assignments are Selector ALT - Event = FCU_SEL_ALT - Variable1 = FCU_SELECTOR, string Value= ALT - Repeat Activation = Off Profile is AS_HONEYCOMB_P3DV5_V2 taken from the download section Thanks Dave Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted December 19, 2022 Aerosoft Share Posted December 19, 2022 Hi, Can you first check if the rotary selector correctly reacts in the Windows Peripheral utility? Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted December 19, 2022 Author Share Posted December 19, 2022 Hello, The buttons from 17 to 21 light up then go out as I rotate the rotary selector. I must also add that the knob appears to be very sensitive in that as I select the ALT position the button light in the Test utility will sometimes remain on Thanks Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted December 20, 2022 Aerosoft Share Posted December 20, 2022 Hi, Do you mean the buttons 17 to 21 are constantly ON together, and all turn OFF when turning the selector ? Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted December 20, 2022 Author Share Posted December 20, 2022 Hello, Sorry for the confusion but no they light up for a mini second as each position is selected. When a position is selected the light can stay on if the knob it wiggled a bit Thanks Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted December 20, 2022 Aerosoft Share Posted December 20, 2022 Well, on each position of the rotary one of the leds from 17 to 21 must lit and remain lit without any user intervention such as wiggling. I guess your unit has a problem. If you are located in EU, please open a ticket with our support system : https://helpdesk.aerosoft.com/hc/ Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted December 22, 2022 Author Share Posted December 22, 2022 Thanks for your help with this Simware, I have contacted the vendor for a response. Cheers Dave Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted December 22, 2022 Aerosoft Share Posted December 22, 2022 You are welcome. Merry Christmas. Link to comment Share on other sites More sharing options...
Thomas1083 0 Posted February 4, 2023 Share Posted February 4, 2023 Dave Eastwood, did you ever solve your problem? I have a similar problem. I am flying a Carenado TBM850 in P3Dv4. I purchased this plane for use in FSEconomy. I recently purchasec the Honeycomb Alpha Yoke and Bravo Throttle. For the life of me, I cannot get the G1000 to show a change in altitude when using the rotaries on the Bravo Throttle Quadrant. With the left knob in ALT, there is no response to the rotary on the right. In the Honeycomb Configurato for P3DV4, the Increase on the autopilot rotary has 5 conditions with the condition-link set to OR. For Condition 1, the condition is FCU:_SELECTOR,string with Value ALT and Variable AP_ALT_VAR_INC with value 100. Does ANYONE know why this doesn't work? I don't have a problem with the left rotary switch. The light will say on when the the FCU_SELECTOR is in the ALT position. Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted February 4, 2023 Author Share Posted February 4, 2023 Hello Thomas, In a word....no The vendor I purchased the Bravo Throttle from sent it back to Aerosoft who deemed it unrepairable. Unfortunately the vendor failed to inform me of this until I chased them up yesterday. They offered me a store credit note but did not have any Bravo systems in stock which was not ideal. I have since had a full refund and purchased another Bravo system from another vender. Thanks. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 4, 2023 Aerosoft Share Posted February 4, 2023 34 minutes ago, Dave Eastwood said: Hello Thomas, In a word....no The vendor I purchased the Bravo Throttle from sent it back to Aerosoft who deemed it unrepairable. Unfortunately the vendor failed to inform me of this until I chased them up yesterday. They offered me a store credit note but did not have any Bravo systems in stock which was not ideal. I have since had a full refund and purchased another Bravo system from another vender. Thanks. Might I suggest buying it from us? We are the importers, we have the repair services, we have the knowledge. Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted February 4, 2023 Author Share Posted February 4, 2023 Ah sorry Mathijs, already purchased from a vendor. Apologies Dave Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted February 5, 2023 Aerosoft Share Posted February 5, 2023 Dave, just check the selector of the new unit, then. Best regards. Link to comment Share on other sites More sharing options...
Dave Eastwood 0 Posted February 5, 2023 Author Share Posted February 5, 2023 1 hour ago, SimWare said: Dave, just check the selector of the new unit, then. Best regards. Yeah, that will be the first thing I check. On side note, the vendor told me that they had sent it back for warranty repair but that it could not be repaired which seems a bit strange, would that have been to Aerosoft or Honeycomb? I have DM'd you with the name of the vendor. Cheers Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted February 5, 2023 Aerosoft Share Posted February 5, 2023 Hi, Depending on the issue and moreover the time it takes to fix it, we either repair or exchange. Best regards Link to comment Share on other sites More sharing options...
Thomas1083 0 Posted February 5, 2023 Share Posted February 5, 2023 Anyone have a good profile for Carenado's TBM850? Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted February 6, 2023 Aerosoft Share Posted February 6, 2023 Hi, There is no TBM850 profiles n our download database yet. I made some research for you and this is the closest I could find : 1 Link to comment Share on other sites More sharing options...
Thomas1083 0 Posted February 6, 2023 Share Posted February 6, 2023 SimWare - thanks for checking. I have a profile that almost works. I can't seem to get the ALT to work with the INC-DEC knob. I have a Carenado 182 with a G1000 and the ALT functions as expected. There is something different about the TBM850. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted February 6, 2023 Aerosoft Share Posted February 6, 2023 For the sake of certainty, what simulator is in use ? Link to comment Share on other sites More sharing options...
Thomas1083 0 Posted February 6, 2023 Share Posted February 6, 2023 P3DV4. I own this plane in FSEconomy and it is not available in MSFS. OS is Windows 11. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted February 9, 2023 Aerosoft Share Posted February 9, 2023 Hi, I will ask Carenado about the specific binding. I will post here if I can get an answer. Thanks. Link to comment Share on other sites More sharing options...
kennyw 0 Posted April 25, 2023 Share Posted April 25, 2023 Greetings all. Bravo throttle , the 7 switches are not recognized in windows joystick configuration tool. All other switches and flap/gear work fine. Any suggestions? Win 11 and p3dv5.3 Thank you Link to comment Share on other sites More sharing options...
Aerosoft SimWare 731 Posted April 25, 2023 Aerosoft Share Posted April 25, 2023 If you mean the rocker switches, this is normal as they are above #32. The Windows utility "sees" up to 32 only. However, they are assignable in the Honeycomb Configurator. Regards. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now