FSUIPC - Button Assignments not working

[Jackmill 0]

Hi there:

I'm trying to use FSUIPC to allow me to use external buttons and encoders and things with the Aerosoft CRJ, and they're just not working at all.  I can see FSUIPC react to them in the logs, if I make an assignment to a generic MSFS control it works fine, but the ASCRJ specific things just don't.  Is there some extra step I'm missing that I need to do?

 

I mainly just want to use encoders and switches to change Alt sel, Ias/Mach, etc.  Things that are difficult to do with the vr headset on.  Nothing fancy.

 

Relevant snippet of the FSUIPC.ini

 

[Profile.CRJ]
1=CRJ700ER Horizon Air N613QX

[Buttons.CRJ]
0=RD,21,CPASCRJ_FCP_SPEED_SEL_DEC,0 	-{Preset Control}-
1=RD,22,CPASCRJ_FCP_SPEED_SEL_INC,0 	-{Preset Control}-
2=PD,23,CPASCRJ_FCP_IAS_MACH_PRESS,0 	-{Preset Control}-
3=RD,25,CPASCRJ_FCP_ALT_SEL_INC,0 	-{Preset Control}-
4=RD,24,CPASCRJ_FCP_ALT_SEL_DEC,0 	-{Preset Control}-
5=RC,150,CPASCRJ_LSP_BARO_CHANGE_DEC,0 	-{Preset Control}-
6=PD,26,CPASCRJ_FCP_ALT_CANCEL_PRESS,0 	-{Preset Control}-
7=RC,151,CPASCRJ_LSP_BARO_CHANGE_INC,0 	-{Preset Control}-
8=PC,149,CPASCRJ_LSP_BARO_STD_PRESS,0 	-{Preset Control}-
9=RC,153,CPASCRJ_FCP_HDG_SEL_DEC,0 	-{Preset Control}-
10=RC,154,CPASCRJ_FCP_HDG_SEL_INC,0 	-{Preset Control}-
11=PC,152,CPASCRJ_FCP_HDG_SYNC_PRESS,0 	-{Preset Control}-
12=RC,144,CPASCRJ_PRESS_LDG_ELEV_KNOB_DEC,0 	-{Preset Control}-
13=RC,143,CPASCRJ_PRESS_LDG_ELEV_KNOB_INC,0 	-{Preset Control}-
14=UD,23,CPASCRJ_FCP_IAS_MACH_RELEASE,0 	-{Preset Control}-
15=UD,26,CPASCRJ_FCP_ALT_CANCEL_RELEASE,0 	-{Preset Control}-
16=UC,152,CPASCRJ_FCP_HDG_SYNC_RELEASE,0 	-{Preset Control}-
17=UC,149,CPASCRJ_LSP_BARO_STD_RELEASE,0 	-{Preset Control}-

 

[SimWare 731]

Hi,

 

The CRJ doesn't use the FSUIPC offsets.

It uses Lvars.

If you can address Lvars from within FSUIPC, you should be able to communicate with the CRJ.

As for the method to do so, I suggest you check the FSUIPC forum.

On the other hand, I advise the use of AxisAndOhs for the Lvars.

Please see this tutorial: 

Best regards.

[SimWare 731]

Hi Jackmill,

 

For info, here is a link that may interest you :

https://forum.simflight.com/topic/92031-wasm-module-client-api-for-msfs-fsuipc7-now-available/

 

Best regards.

[Jackmill 0]

Turns out the issue was just that WASM wasn't enabled.  Whoops.

[SimWare 731]

Glad it works now.

Have fun flights.