paladin569 3 Posted March 17, 2021 Share Posted March 17, 2021 I am using the LOGITECH / SAITEK Yoke and 2 Logitech Throttle Quadrants. NO ISSUES WITH ANY OTHER SIRCRFT IN THE SIM. I downloaded the CRJ today and the Throttles are squirrely at best even after calibration. Idle thrust shows 25% but if I bump the throttle up just a bit it drops to zero and then bounces around. Flaps axis does not function correctly and full flap range is covered within an inch of travel spoiler lever is similar. Again EVERY other aircraft works fine here. Mapping switches to lights seems to be hit and miss. Why would a PARTNER not follow the simulators basic functionality? So far I am not impressed and I used to build these aircraft in real life and am certified to maintain them. Link to comment Share on other sites More sharing options...
phnkone 2 Posted March 17, 2021 Share Posted March 17, 2021 I'm staying here, my panels don't work even though I'll try to use spad.next, patience friend, the baby was just born yesterday Link to comment Share on other sites More sharing options...
Chris Corwin 5 Posted March 17, 2021 Share Posted March 17, 2021 Staying here for this one. Using Logitech X56 and having the same issue, reversers wont stabilize and bounce back and forth between regular thrust and very inconsistent thrust when moving throttle levers. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 17, 2021 Aerosoft Share Posted March 17, 2021 Please check these tutorials. They apply to the TCA and Honeycomb throttle quadrant but can be easly used for any other device. https://forum.aerosoft.com/index.php?/topic/160324-how-to-configure-the-honeycomb-bravo-throttle-with-aerosoft-crj-550700/ https://forum.aerosoft.com/index.php?/topic/159677-how-to-use-the-tca-throttle-with-aerosoft-crj-550700/ Regarding the panels, I suppose Phnkone refers to the Saitek/logitech ones, altough not specified. These panels are meant to be used with the default aircraft. The addons have different function interface system. Logitech hasn't developped any addon-specific driver. Link to comment Share on other sites More sharing options...
Adam Mar 9 Posted March 17, 2021 Share Posted March 17, 2021 these tutorials unfortunately don't work with levers from Logitech / Saitek Proflight Yoke System. I can't code the throttle, flaps and spedbreak Link to comment Share on other sites More sharing options...
Jetjockey10 31 Posted March 18, 2021 Share Posted March 18, 2021 I have.the Airbus TCA OFFICER throttles and SideStick which are only partially working (must change key assignment to NOT use the (0-100%) that works on all other add ons. I also have all the Saitek/Logitech large panels and 8 Flight Instrument Panels that are not supported. I will wait for SPADNeXt to take a shot at the CRJ. Regards, Ray Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 18, 2021 Aerosoft Share Posted March 18, 2021 12 hours ago, Adam Mar said: these tutorials unfortunately don't work with levers from Logitech / Saitek Proflight Yoke System. I can't code the throttle, flaps and spedbreak Dear Sir, Please check the throttle calibration manual here. I can assure you the Saitek throttle works fine. I am using one here flawlessly. The Flaps axis is indeed currently not active (you can assign buttons to DECRESE FLAPS and INCREASE FLAPS function in the meantime) It will be implemented in the next CRJ update. The SPOILER AXIS can be, to some extend, used. CRJ Throttle Calibration Manual.pdf Link to comment Share on other sites More sharing options...
paladin569 3 Posted March 18, 2021 Author Share Posted March 18, 2021 Ok I also Have a home made Switch panel that I use to control lights and other toggle switch type things in the sim. It uses a L:eo Bodnar board as a controller. Why does this not work in the CRJ. it works in every other 3rd party aircraft I have as well as the OEM ones? Microsoft gave us a pretty good system to map inpputs and buttons but it looks like Aerosoft decided to do something completely different. I have ZERO desire to add middleware to operate a simple toggle switch input. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 19, 2021 Aerosoft Share Posted March 19, 2021 We will maybe consider adding some more functions interface capabilities with the next updates. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted March 19, 2021 Aerosoft Share Posted March 19, 2021 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.