Pavel1971 487 Posted January 19, 2020 Author Share Posted January 19, 2020 Thank you very much. Buildings next to the observatory will also be made. I have to ask you. If possible, take photos of the cableway where it starts. You can specify the geographical coordinates of its beginning and where it ends, as well as at least two intermediate points. Intermediates may not be accurate, it's not scary. Building a cable car, I will already adjust. From your point of view, at what height above ground level do the cable car cabs move? Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 20, 2020 Author Share Posted January 20, 2020 Start dressing in textures Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 20, 2020 Author Share Posted January 20, 2020 Direction with glass reflection selected. At this airport, the passenger terminal glass is mirrored on the side of the aircraft parking, inside is transparent. Considering that I will do the interior inside the passenger terminal, the choice of terminal windows from the platform side will be provided to the user from two options: 1. Mirrored. 2. Translucent. The video shows how with the dynamic reflection in the reflection of the glass, the position of the windsock changes Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 22, 2020 Author Share Posted January 22, 2020 Everything is ready to create the interior of the passenger terminal. There are still some small works from the outside and in ten days, I can show the interior. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 22, 2020 Author Share Posted January 22, 2020 I could not resist and lay out two more screenshots. I really liked the airport logo on the front door. It took me a little time, but the logo turned out beautiful Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
jakubplevko 0 Posted January 22, 2020 Share Posted January 22, 2020 nicee Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 23, 2020 Author Share Posted January 23, 2020 In the screenshots there is an option with mirror glasses on the windows. In addition to reflection, mirrored glasses transmit light a little. The second option will be only with a small degree of transparency. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 25, 2020 Author Share Posted January 25, 2020 It was quite difficult to mark the building without having a blueprint for the building. But work is progressing Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 26, 2020 Author Share Posted January 26, 2020 That's all with this part of the terminal. Next week I’ll finish the second part of the terminal. I think that the terminal will also be included in the configurator with the choice of two options. The main option will include all the halls of the passenger terminal, 3D models of seats, sofas, lamps, trolleys. The second option will be facilitated. It will also include all the halls, partitions, inscriptions, but there will be no 3D models or there will be a minimum number of them. Textures will also be applied to the terminal’s internal walls to give them “volume” with shadows, small cracks in drywall, etc. Also, we plan to revitalize the passenger terminal with animated people. Models of people and animations are made by Christian. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 27, 2020 Author Share Posted January 27, 2020 This is the layout of the passenger terminal. By the weekend it should be done. At the moment, all partitions are in place. The doors are marked. Basic 3D objects are finished. It remains to make control frames, tables, make inscriptions, there are a lot of them in Slovak and English, texture the walls, arrange objects. The ceiling on the left side extends when everything is ready it will cover the entire space. Why is that. The terminal frame is higher than the ceiling part inside. In the inter-ceiling part there are communications, hoods, etc. Therefore, so that the ceilings inside the terminal would not seem high, such a decision was made. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 27, 2020 Author Share Posted January 27, 2020 In principle, what is ready, you can see in the simulator. This is not the finish, there is still work with objects, textures of walls, ceilings, lamas, etc. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 29, 2020 Author Share Posted January 29, 2020 The check-in room is almost ready. We will proceed smoothly to the control and security zone. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted January 30, 2020 Author Share Posted January 30, 2020 Testing the completed part in the simulator, a test flight and adjustments that still need to be done. Overall i'm pleased Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 1, 2020 Author Share Posted February 1, 2020 Actually, work on the interior is completed. Some touches remained, very small and closer to the evening the interior will be with a passenger terminal in the simulator. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Walter Almaraz 81 Posted February 1, 2020 Share Posted February 1, 2020 Hi Pavel, your work looks amazing! Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 1, 2020 Author Share Posted February 1, 2020 Thanks! Some users ask about frame rates. Poprad Airport is not a large airport, so some points can be done in sufficient detail. I would like the interior to be a feature of this project, so I paid special attention to it. 3D models are quite well optimized and at the same time look in detail. In addition, users will be given a choice in the configurator of two options for the interior, full and lightweight. The next stage, administrative buildings and hangars Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 4, 2020 Author Share Posted February 4, 2020 Here is the model of the office building. You need to prepare textures and "dress" him;) Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 6, 2020 Author Share Posted February 6, 2020 Almost the front part that goes onto the platform is ready. The upper part of the building where the inscription "AIRPORT" has not yet been made. We also need to work with textures: make normal maps, a specular, add gloss for metal, prepare night textures. Did a test in the simulator. I like The following screenshots I will show closer to testing the project. I work on LZTT every day, so I think that in the second half of spring we can enjoy Poprad - Tatry Airport Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 7, 2020 Author Share Posted February 7, 2020 Good evening everyone! I finished work on the administrative building of the Poprad - Tatry airport and decided to make a small fact-finding video. Video animation created in SketchUp. SketchUp lets you make simple animations for videos. Sound imposed by the standard Windows 10 program. The next stage is the creation of office buildings of the airport and hangars. Link to comment Share on other sites More sharing options...
samuelvalasek 0 Posted February 7, 2020 Share Posted February 7, 2020 From being here recently, I can say your work is amazing! Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 9, 2020 Author Share Posted February 9, 2020 The remaining buildings are simpler than the administrative. But it will be done with "taste" like real buildings at the airport. What is planned. Windows will of course be with slopes, rather detailed frames and glass. The four-story building has two central entrances on both sides. The control tower will be with transparent windows and interior. On the balcony around the tower voluminous fences. The garage for cars and the hangar will be partially open with an internal frame made of texture. There will be one of the fire engines in the garage. There will be a small plane in the hangar. This is how I see it at this stage. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
alfonSoSVK 0 Posted February 9, 2020 Share Posted February 9, 2020 Will this be also really hard on FPS? In Kosice I have only around 20 fps, it is really too demanding, what can I do with it? For example in beautiful Orbx Innsbruck I have over 40 fps, so for me it is kind of sad that in Aerosoft Kosice I can not get more than 20. Any tips please? Also, let me know which coordinates or pictures you still need, I am familiar with the Poprad area. Coordinates for the cable car: First station - 49.165964, 20.269161 Second station - 49.179086, 20.256025 Third station - 49.187666, 20.233053 Final station on the peak - 49.195136, 20.213360 Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 10, 2020 Author Share Posted February 10, 2020 Thanks for the coordinates! Try to reduce ground and air traffic in the simulator settings in Kosice. If you have set the maximum number of generated objects in the simulator, try to reduce these values. These are the characteristics of my computer: Intel (R) Core (TM) i5-3450 CPU 3.10 GHz RAM 16 Geforce GTX 1060 HDD - SSD 250 Gb Attached screenshots of the settings in the simulator. With these settings, I have approximately the same frame rate at all airports from 30 to 35. As a rule, I tested frame rates on the ATR 42 Carenado. I understand that settings are a purely individual thing. Once I tried to configure the video card using the proposed settings NVIDIA Inspector. The image was beyond praise but the frame rate at the same time dropped sharply throughout the simulator. These settings were not for my computer specifications. I’ll think that it’s possible to adjust when preparing the Kosice update so that the frame rate is higher. Poprad is 70% equipped with 3D objects. Remained static, animation of energy-intensive components. So far I do not see problems with frequent frame rates. More flexible Poprad configuration in a configurator is supposed. I am in this thread on the forum, or in Kosice I wrote my email address, you can write to me on it. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 11, 2020 Author Share Posted February 11, 2020 The building with the control tower is ready. I did not want to make it very dirty, with drips, etc. The interior of the tower will be quite simple. The ceiling with ceiling lamps, which will be on the texture, several simple tables, armchairs and a couple of monitors. The interior of the tower can also be disabled in the configurator. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Pavel1971 487 Posted February 13, 2020 Author Share Posted February 13, 2020 While working on the project, I found out that Poprad Airport has one of AIR divisions - TRANSPORT EUROPE, in the fleet of which is AGUSTA A109, which I decided to make a static model for scenery Poprad - Tatry. The original building in ATE colors will also definitely be in LZTT Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.