Samuel Gomes 0 Posted August 26, 2016 Share Posted August 26, 2016 Hi, I've just purchased the Zurich V2 scenery for XP10 and I've checked the documentation that there is a way to disable the VFR helpers and the static scenery, but the second I change the frequencies they appear again. Is there a way to disable those for good? Thanks! Link to comment Share on other sites More sharing options...
Mario Donick 271 Posted August 26, 2016 Share Posted August 26, 2016 Hi Samuel, stay your frequencies changed or do they revert after your change? Link to comment Share on other sites More sharing options...
Samuel Gomes 0 Posted August 26, 2016 Author Share Posted August 26, 2016 Hey Mario, They revert back when the frequencies are changed. I've tried using the JarDesign A320neo. In this aircraft I have to put the frequency in the ILS, not VOR, probably the ILS is VOR1 internally. Link to comment Share on other sites More sharing options...
Mario Donick 271 Posted August 26, 2016 Share Posted August 26, 2016 Okay. As scenery does not have any impact on aircraft systems, the real question is why the aircraft does not keep your frequency. Maybe your manual setting is overwritten by an ILS approach you selected in the A320? Link to comment Share on other sites More sharing options...
Samuel Gomes 0 Posted August 26, 2016 Author Share Posted August 26, 2016 So it's just a bad idea to implement this this way. Pretty much every scenery I have, I have the option to disable static/extra scenery by replacing some .dsf files. Is there such a thing for Zurich? Will I have to edit those myself? Edit: I have the EHAM airport from Aerosoft and yes, there are 3 zip files with different static object options. Link to comment Share on other sites More sharing options...
Mario Donick 271 Posted August 26, 2016 Share Posted August 26, 2016 vor 24 Minuten, Samuel Gomes sagte: So it's just a bad idea to implement this this way. Pretty much every scenery I have, I have the option to disable static/extra scenery by replacing some .dsf files. It's up to the particular developers to decide for the implementation they choose. EHAM is not from the same developer as LSZH, so both did in their own way. Personally, I prefer manual installation and configuration, too, but more users than one would think have problems with manual scenery installation, not even to think of manual replacement of single files in sub-folders. So in Zürich a more user-friendly method was used -- a dataref-based method that exists in X-Plane for quite a long time, by the way, because it allows for on-the-fly configuration without writing a plugin. I don't know if the Airbus is correct in reverting your manual frequency change -- regardless if you do it for the case of this scenery or for another purpose -- but I'll check if your observation is reproducable and if it is I'll ask our developers if they can find another way. Link to comment Share on other sites More sharing options...
Samuel Gomes 0 Posted August 26, 2016 Author Share Posted August 26, 2016 Thanks for the support Mario! Link to comment Share on other sites More sharing options...
swissomen 0 Posted October 18, 2016 Share Posted October 18, 2016 I use LSZH quite a lot and found out that the automates don´t fit the airplanes of jardesign A320neo and A330 (gates to high). Is there a way to fit them on my own? There is an autogate at E56 which is integrated in the static Gate. This gate goes through the airplane when you choose this Parking position when starting. Can I get rid of it? There is an update for LSZH available and I tried to download it. But then I got the message that the file is corrupted. Link to comment Share on other sites More sharing options...
Marten 80 Posted October 18, 2016 Share Posted October 18, 2016 Good news folks, with X-Plane 11 we will Update Zurich again. Concerning the Animations we will introduce the new animation plugin which allows users to control animations through a menu. The upcoming Berlin Tegel scenery will be enhanced with that too. Cheers Marten Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted October 18, 2016 Administrator Share Posted October 18, 2016 Hello Marten, that's indeed good news. Thank you for posting. Greets Heinz Link to comment Share on other sites More sharing options...
MartinM 27 Posted October 27, 2016 Share Posted October 27, 2016 On 18.10.2016 at 09:54, swissomen sagte: I use LSZH quite a lot and found out that the automates don´t fit the airplanes of jardesign A320neo and A330 (gates to high). Is there a way to fit them on my own? There is an autogate at E56 which is integrated in the static Gate. This gate goes through the airplane when you choose this Parking position when starting. Can I get rid of it? There is an update for LSZH available and I tried to download it. But then I got the message that the file is corrupted. Additionally the Guidance System is missing. Maybe in the update it could be added too Link to comment Share on other sites More sharing options...
mishaikin 0 Posted November 30, 2016 Share Posted November 30, 2016 Hi there, I don't know if anyone is experiencing this, but I definitely have issue taxiing on A, or its proximity (LSZH v2, from store.x-plane.org). It is like taxiing on gravel. It happens with all my planes and is quite annoying, since runway 28 is used a lot. See the video. Can s.th. be done while waiting for an update for XP11? Link to comment Share on other sites More sharing options...
Marten 80 Posted November 30, 2016 Share Posted November 30, 2016 Did you install the update of v2 as well (v2.01)? That should fix it (just tested it with the latest Aerosoft-shop version) @Heinz Flichtbeil Could you please check if the .org-Store has implemented the v2.01 as well? Link to comment Share on other sites More sharing options...
mishaikin 0 Posted November 30, 2016 Share Posted November 30, 2016 1 minute ago, Marten said: Did you install the update of v2 as well (v2.01)? That should fix it (just tested it with the latest Aerosoft-shop version) @Heinz Flichtbeil Could you please check if the .org-Store has implemented the v2.01 as well? Just downloaded it again, but I am not sure it is 2.0.1, it more seems to be 2.0, though I can't see clearly where the version is .... Link to comment Share on other sites More sharing options...
Marten 80 Posted November 30, 2016 Share Posted November 30, 2016 Allright, I forward your issue to the Product Management of Aerosoft. Looks like the .org-Store does not have the latest version. Link to comment Share on other sites More sharing options...
mishaikin 0 Posted November 30, 2016 Share Posted November 30, 2016 2 minutes ago, Marten said: Allright, I forward your issue to the Product Management of Aerosoft. Looks like the .org-Store does not have the latest version. Thanks! Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted November 30, 2016 Administrator Share Posted November 30, 2016 Hello, I also will forward this issue to our shop manager. I can't check if from here (external bureau). With the actual download I have the problem too. Greets Heinz Link to comment Share on other sites More sharing options...
mishaikin 0 Posted December 1, 2016 Share Posted December 1, 2016 12 hours ago, Heinz Flichtbeil said: Hello, I also will forward this issue to our shop manager. I can't check if from here (external bureau). With the actual download I have the problem too. Greets Heinz I would be grateful if you let me know when it is updated for the org store. Unfortunately the store doesn't notify of changes its customers and on the products pages the version is often not clear (at least for the sceneries). Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted December 1, 2016 Administrator Share Posted December 1, 2016 Hello, as I know, the other shops have access to our update database. So I think they shall have the actual versions. But we are checking the issue here.... If there are news we will post here... Greets Heinz Link to comment Share on other sites More sharing options...
mishaikin 0 Posted December 1, 2016 Share Posted December 1, 2016 As of today the org store says: "Current version : 2.01 (last updated May 2016)" But re-downloading leads me to the same version I already have (the one of 30-MAY-2016). And the bug is still there. I wrote to the store to see if they have updated really the scenery or just had the intention to do it . Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted December 1, 2016 Administrator Share Posted December 1, 2016 Hello, yes, we are in the process to check this issue... The developer has the information Greets Heinz Link to comment Share on other sites More sharing options...
Marten 80 Posted December 22, 2016 Share Posted December 22, 2016 Hello guys, I just made a quick fix for the wrong surface on the taxiway. It should be solved when replacing the apt.dat with the one attached. Make sure to backup your original one. A major update will follow with the release of XP11. Cheers Marten apt.dat Link to comment Share on other sites More sharing options...
ironcondor 0 Posted December 23, 2016 Share Posted December 23, 2016 Has anyone tested Zurich in X-Plane 11 Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
MartinM 27 Posted December 23, 2016 Share Posted December 23, 2016 Works for me in XP-11 Link to comment Share on other sites More sharing options...
ironcondor 0 Posted December 23, 2016 Share Posted December 23, 2016 Works for me in XP-11 Thanks! Sent from my Pixel XL using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.