-
Posts
14161 -
Joined
-
Days Won
80
Content Type
Profiles
Forums
Downloads
Posts posted by OPabst
-
-
Hast Du mal AEShelp gestartet?
Drueke dort auch mal den Repair/Resync Button unter der Airportliste.
-
Are you talking about Pushback with AES or did you mean the Pushbacktrucks generated by the FSX itself at the positions?
-
Ok,
ein Formatfehler liegt da nicht vor. Muss ich mal Maria drauf ansprechen, was die Meldung auslösen kann.
Aber ich habe ein Pfadfehler in dem "Vistamare Core" Eintrag festgestellt und habe mal manuell den ASE Eintrag angefügt.
Mache ein Backup von deiner und tausche die dann mal mit der angehängten, mal schauen ob es dann geht.
Schaue bitte auch mal, ob es dann einen Pfad C:\Users\<username>\AppData\Local\Aerosoft gibt.
-
oft erhalte ich bei Szenerie-Installationen (wie beispielsweise Bari und Heraklion) Fehlermeldungen, wie etwa
"ERROR with edit dll.xml..the addon manager is not available."
Diese Meldung wirst Du aber eher beim Starten des FS erhalten, nicht beim Installieren, oder? Denn der Addon Manager ist ja ein FSDT Produkt, hat also nichts mit Bari oder Heraklion zu tun.
Ich würde gerne wissen, was der Installer mit der dll.xml machen will; und natürlich, wie ich dem Installer hier helfen kann.
Die Installer, wenn nötig, tragen nur ein <Launch.Addon> Tag in die dll.xml ein, damit der FSX beim Starten die dort hinterlegte DLL mit anzieht.
2. Baustelle ist Frankfurt-Hahn. Das Update auf 1.02 war kein Problem. Aber ASE 1.0.0.3 lässt sich nicht installieren und quittiert mit der Fehlermeldung
"ERROR not find user AppData-Folder"
Ich würde bei deinem Fehlerbild drauf tippen, dass deine DLL.XML bereits defekt ist und im Format inkonsistent, somit sowohl der FSX als auch nun gestartete Installer damit nichts mehr anfangen können.
Kannst ja mal versuchen, die dll.xml aus dem Verzeichnis C:\Users\<username>\AppData\Roaming\Microsoft\FSX mit dem Internetexplorer zu öffnen, der meldet in der Regel eine Fehler, wenn das XML Format nicht korrekt eingehalten ist.
Oder Zippe die DLL.XML mal und hänge sie hier an (Full Editor Modus), dann kann man sich die mal ansehen.
-
Please switch off the DX10 Preview mode.
-
Ich verweise mal auf meine Antwort hier, da wird vielleicht es etwas klarer: http://www.flightforum.ch/forum/showpost.php?p=818169&postcount=2
-
Fine, don't forget to switch the entries in the library and AES is also not on top of the list, therefor start AEShelp once.
-
Two thinks look not OK, but I don't know how this could happen, when the original installer is used:
1.) The ASE Modules are not added to the dll.xml. Attached you find a Zip with a dll.xml where I have add it manually, no garanty that the rest is installed correct, so make a backup of your dll.xml bevor.
2.) The order of the scenery for PAFA is wrong, the "Fairbanks X" entry must be move above the "Fairbanks X Terrain without UTA" entry
So, something went wrong while the install here. Did you switch the Orbx stuff to Global (off) in there tool before you install PAFA?
- 1
-
Das ist so, aber für jede Texture muss es auch eine Nachttexture geben, die dann am Ende *_XXXX_LM.BMP heißt und diese fehlt bei Dir. Entweder war sie in dem Packet nicht drin oder Du hast sie nicht kopiert.
-
1.) Rename AF2_EDDP.OFF to AF2_EDDP.BGL
2.) Move AFD above EDDP
That's it.
I don't know, why the AFCAD was name *.OFF, but that's the Problem. Did you use the original installer?
-
You are welcome, have fun.
-
The scenery.cfg you add seams to be from the wrong directory, not from C:\ProgramData\Microsoft\FSX
But, the primary problem is a format error in the dll.xml, which seams to be generate by the FSRecorder you installed sometimes before.
In the attached ZIP you find a corrected version, make a backup from yours and replace it with the file in the Zip.
When the FSX starts, you will get trust messages which you all anwser with YES, then all will work fine I expect.
-
Hi Chris,
please make a Zip with the following files and attache it here:
- Scenery.cfg you found in C:\ProgramData\Microsoft\FSX
- DLL.XML and FSX.CFG you found in C:\Users\<username>\AppData\Roaming\Microsoft\FSX
-
Ja, derzeit kann man das noch nicht für die verschiedenen Modelle konfigurieren, daher ist es bei der B74x (x für 4 oder 7 - sofern sie so benannt ist in AESConfig) auf das Modell der PMDG optimiert, da das wohl die meist genutzt 747 sein dürfte. Leider passt es dann für das Default Modell nicht optimal.
-
Where did the message comes, in FS? Is it FS9 or FSX? If you set the Airports to OFF in AESHelp is it back to normal?
If you use FS9, take a long look here: http://forum.aerosoft.com/index.php?/topic/19147-ooms-ctds-and-maybe-more/
-
- Check, if the EDDP Afcad can be found in the <FSX>\Aerosoft\AFD\Scenery folder
- Check, if the AFD Entry is on top of the scenery Library (maybe below AES if installed)
- Check, that there is no other EDDP related Afcad for a Traffic addon like MyTraffic active somewhere.
-
Hi,
1) I have no issue here to open the zip and read the file, even with the link you posted, so please check if your browser will download the file correct.
2) If you have activated the LFBO of Simwings for FS9 before, AESHelp will reduce the needs of credits for the Aerosoft Toulouse X version by one credit (upgrade refound), so you need only one credit in this case.
-
Hi,
I would expect, the issues is based on the situation of the localiced FSX Version and primary on the cyrylca fonts in the Title line of the scenery.cfg, which the related modules could not handle correct.
When you have a look to the "aseloadlog.txt" you find in the folder C:\Users\<your username>\AppData\Local\Aerosoft\log
that it will end with a line like "#CAseLoad:: Scenery.cfg-Path"
The same issue we have seen with a ORBX installer, which adds cryptic letters to a Title Line of one entry, so the modules blocks there too.
Give Maria time until see is back in the office tomorrow, Thorsten has forwarded the files to her, so she can find a solution here.
-
please contact the support via email at support@aerosoft.com
-
Did you have AES installed? if so, start AEShelp again, looks like AES is not on top of the scenery library list.
-
Here you find a attachement with a replacement for the Afcad file, maybe this helps for the Taxisignes too, beside the wrong Ident for the ILS.
-
- Please move the Terrain entry below Fairbanks X
- Check, if you have a Aerosoft Entry below the Add-Ons Menu
-
Please check this here: http://forum.aerosoft.com/index.php?/topic/56574-aes-224-available/
there you find the fix for the LGIR problem
-
This normally only happens, when non valid numbers are entered. I never seen that, when the number was correct and accepted.
Kein AES in EDDF (FS9)
in Airport Enhancement Services
Posted
Du hast aber in beiden FS Versionen die neuste AES Version installiert?
Eine Warnung bezüglich eine Scenery.cfg im Virtual-Store bekommst Du nicht?