G Sproson

  • Content Count

  • Joined

  • Last visited

1 Follower

About G Sproson

  • Rank
    Flight Student - Airwork

Contact Methods

  • Website URL
  • Skype

Recent Profile Visitors

2083 profile views
  1. G Sproson

    Aircraft shut down mid cruise

    I believe you seeing a similar issue to what was causing the same effect on the CRJ, Leo MD80 and TFDi 717. Its to do with Carenado believe it or not, they have been rumered to have some kind of anti-piracy coded in that causes problems for others who own their products, so if your flying in the vicinity of someone in their aircraft, it affects you. If you have any carenado aircraft installed give the following a try and see if it fixes your issue: For those who also have this try the following: (I reccomend to do this before you boot up P3D V4) - Ensure your simulator is not running - Open VPilot - Go to the Settings tab - Look for and click on Model Matching - Under Model Matching click Advanced - The top selection on the right should be SimObject\Airplanes - Expand this selection - Scroll down until you see Carenado - Uncheck ALL Carenado aircraft - Click Apply then OK - Boot up your sim - Restart Vpilot - Problem should be fixed For those who want the Biz jets in their model matching I highly reccomend FLai - its completly free and has hundreds of models which can be recognised and used by VPilot, simple installer does it all for you, all you have to do is click the Update button a few times. Regards
  2. G Sproson

    Tiller won't work

    To use the Tiller function, you'll want to use FSuipc, within there there is an option under "send as FSuipx Axis" for 'steering tiller', or you can go under send as FS Axis and look for 'steering' in the dropdown
  3. I highly recoomend looking into FSupic. It gives you much more functionality in being able to smooth out and trim your assignments. Takes a little work with the bus,but its worth it
  4. Dave has asked me to reply to this, Within the airbus options there is a feature to seperate the tiller from the pedals, once this has been done you should use the 'Send as FSuipc axis' and select steering tiller. This will then alow the seperate hardwae to interface with the coorect assignment.
  5. G Sproson

    Aerosoft A320/321 autopilot glitch

    Check your frame rates, the FBW systems require at least 18fps, you'll find that if your frames drop you'll see erratic behaviour. I would reccommed lowering your settings in the sim and trying this again. You can also pause the sim for a few seconds when you notice this happening and when you un-pause it should resume normal flight. Regards
  6. G Sproson

    Airbus never reaches Mach Cruising speed

    Can you try altering the CI (Cost Index) and check you have no interferance drag (Gear, Spoilers etc...)
  7. G Sproson


    Well, even with a smooth landing, you have 30+ tonnes on metal touching down at 140 mph and 250-300ft vertically, the shocks will absorb so much, but your still going to burn rubber from the tyres.
  8. G Sproson

    Non-stop rolling on taxi

    Hi, This is correct, at lower weights the aircraft produces enough power at idle to roll upon brake release. At higher wieghts a spool up will be required to get the aircraft moving.
  9. Hi there, When this is happening can you check there is no hardware that could be interfering with the trim settings either in the Sim Control options or via FSuipc if you have a registered version? This could be a lever or button that has been accidentally assigned to the trim tab. Thanks
  10. G Sproson

    CTD 1.030

    Can you post a copy of the CTD log from the event viewer?
  11. I believe at this time the CRJ does not have this feature
  12. This maybe so, but those who do this have just paid $80+ to slightly upgrade the default 737. The idea of the post was to make you realise that if you put your money into a product that has had a vast number of hours and has been developed to improve and enhance your experience in the flight sim community only to say you don't want to learn the systems is foreign to me. Now it's your money but there is a vast amount of knowledge on the internet (google, youtube and live streams such as ours) constantly demonstrate how to get the most from your purchases. We all had to start learning somewhere, when I first purchased the PMDG 737 in FS2004 it only took a week or two to learn the new systems, you won't get that if you just put the default GPS back into it.
  13. Ok, I have to chime in here, why would you spend money on an item only to revert it back to a default aircraft???? You would be better off keeping that money in your pocket and buying a new set of marbles. As Dave said, it has a fully integrated Flight Managment System (FMS), that enhances the simulation as you are using the aircraft closer to how it was actually designed, if you want something with a Garmin, you'd be better looking into a 1980's Piper or Cessna from JustFlight or Carenado. No real CRJ has a GPS system, so that should answer the question for you. If you want a CRJ with a default GPS option, use the FSx default aircraft or look at Wilco I have to say, this is one of the strangest posts I have come across on this forum......
  14. G Sproson

    Nose Wheel

    Are you running the calibration through FSuipc or through the Sim controllers interface?
  15. G Sproson

    Joystick X Axis (Ailerons) not working

    I would see if there is anything else assigned to this axis which may be interfering (Another axis from a different controller, a key press etc...) after this try to increase the null zone. Can you post a short video outlining this issue so we can see what is happening? Many thanks