DHC-2 Beaver repaints
In this section you will find 3rd party repaints for the DHC-2 Beaver created by Aerosoft.
21 files
-
Submitted
-
BeaverX Bare Metal No Registration Markings
By Guest
This is a correction to the previous BeaverX bare metal repaint, due to my misunderstanding of the original request.
The texture requested was for BeaverX bare metal finish without any markings in order for
the downloads to apply his or her own logo’s and registration markings.
This has now been corrected and this texture is a true bare metal BeaverX sans logos and registration, or as close as I can get it.
Also included are the original layered bare metal Fuselage and Wing .psd files for those wishing to apply their own logos and registration markings.
Again if you have any questions, suggestions or would like any additions to this file, please contact me using the E-Mail address included in the zip file.
743 downloads
Submitted
-
Beaver Repaint - African Airstrip Adventures
By Matt_Smith
Here is the Aerosoft Beaver X painted as 5Y-AAB for use with African Airstrip Adventures. Readme.txt contains all information on installing this repaint into your FSX installation. Requires the Aerosoft Beaver X http://en.shop.aerosoft.com/eshop.php?action=article_detail&s_supplier_aid=10389&s_design=DEFAULT&shopfilter_category=Flight%20Simulation&s_language=english 7Zip is required to decompress this archive.304 downloads
Submitted
-
Captains of the Clouds Floatplane DHC2 Beaver CF-HGO
By Capt. Ralph
couldn' find the original Norseman aircraft online for FSX. I thought it would be nice to use the Beaver in place of the Norseman. I tried my best to make a close copy of the original from the 1942 move Captains of the Clouds starring James Cagney. Hope you like it...
The Norseman was used in the 1942 movie Captains of the Clouds starring James Cagney. The Norseman Float Plane. Originally introduced in 1935, the Norseman remained in production for almost 25 years with over 900 produced. A number of examples remain in commercial and private use to this day. Norseman aircraft are known to have been registered and/or operated in 68 countries throughout the world and also have been based and flown in the Arctic and Antarctic regions.
95 downloads
0 comments
Submitted
-
De Havilland Aircraft of Canada DHC2 Beaver N963DH Repaint DHC2 Beaver Amphibian
By Capt. Ralph
UPDATED Sept. 26, 2014. Owned by DeHavilland Aircraft of Canada LLC Boston, MA. 1963 MKI DHC-2 Beaver Amphibian. No chrome spinner, and only a 5 seat. Aerosoft doesn't have an 8 seat MKI. I like clean looking aircraft like you'd expect from the factory. All in all, I think I came close to the real thing. Thanks! Hope you like her..
91 downloads
0 comments
Submitted
-
Aerosoft DHC-2 Beaver Amphibian Harris Air Freight Repaint
By Capt. Ralph
Inspired for the 1998 movie Six Days Seven Nights starring Harrison Ford. The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world.
127 downloads
0 comments
Submitted
-
AeroSoft/Dehavilland Beaver Air Seafari VH-PCF
VH-PCF air seafari repaint for Aerosoft BeaverX Payware model for FSX
http://www.aerosoft.com
Original copyright and intellectual property rights
Many thanks to aerosoft for both the wonderful BeaverX model and thanks to you for taking and interest in this repaint
How To Install:
Unzip the contents of this zip file to your
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian
Dir keeping folder paths intact
Open the
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian\aircraft.cfg
file With notepad and add the following body of text under the last sequentialy numbered [fltsim.xx] entry
altering the .xx with the next sequential number
[fltsim.xx]
title=DHC-2A VH-PCF
sim=FSX_DHC-2A
model=amphib1
panel=
sound=
texture=VH-PCF
kb_checklists=DHC-2A_check
kb_reference=DHC-2A_ref
ui_manufacturer=de Havilland Canada
ui_type=DHC-2 Amphibian
ui_variation=Air Seafari
atc_heavy=0
atc_id=VH-PCF
atc_airline=
atc_flight_number=
atc_parking_types=RAMP
ui_typerole="Single Engine Prop Amphib"
ui_createdby="Aerosoft"
description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world, Air Seafari re-paint by Gizmo
Feedback comments ect ect ect can be sent to me at
gizmoskins@googlemail.com
Or you can find me at the Nvnews.net FSX thread
http://www.nvnews.net/vbulletin/showthread.php?t=78216&page=113
Feel free to spread this re paint around your fav FS fan sites just please be sure to credit me as the original author as this work remains my intellectual property
Peace
Gizmo
320 downloads
0 comments
Submitted
-
AeroSoft/Dehavilland Beaver Air WhitSundays VH-AWI
VH-AWI air whitsunday seaplane repaint for Aerosoft BeaverX Payware model for FSX
http://www.aerosoft.com
Original copyright and intellectual property rights
Many thanks to aerosoft for both the wonderful BeaverX model and thanks to you for taking and interest in this repaint
How To Install:
Unzip the contents of this zip file to your
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian
Dir keeping folder paths intact
Open the
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian\aircraft.cfg
file With notepad and add the following body of text under the last sequentialy numbered [fltsim.xx] entry
altering the .xx with the next sequential number
[fltsim.xx]
title=DHC-2A VH-AWI
sim=FSX_DHC-2A
model=amphib1
panel=
sound=
texture=VH-AWI
kb_checklists=DHC-2A_check
kb_reference=DHC-2A_ref
ui_manufacturer=de Havilland Canada
ui_type=DHC-2 Amphibian
ui_variation=Air Whitsunday
atc_heavy=0
atc_id=VH-AWI
atc_airline=
atc_flight_number=
atc_parking_types=RAMP
ui_typerole="Single Engine Prop Amphib"
ui_createdby="Aerosoft"
description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world, Air Whitsunday re-paint by Gizmo
Feedback comments ect ect ect can be sent to me at
gizmoskins@googlemail.com
Or you can find me at the Nvnews.net FSX thread
http://www.nvnews.net/vbulletin/showthread.php?t=78216&page=113
Feel free to spread this re paint around your fav FS fan sites just please be sure to credit me as the original author as this work remains my intellectual property
Peace
Gizmo
254 downloads
Submitted
-
AeroSoft/Dehavilland Beaver Cairns SeaPlanes VH-CXS
Cairns Seaplanes VH-CSX repaint for Aerosoft BeaverX Payware model for FSX
http://www.aerosoft.com
Original copyright and intellectual property rights
Many thanks to aerosoft for both the wonderful BeaverX model and thanks to you for taking and interest in this repaint
How To Install:
Unzip the contents of this zip file to your
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Floats 5 Seats
Dir keeping folder paths intact
Open the
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Floats 5 Seats\aircraft.cfg
file With notepad and add the following body of text under the last sequentialy numbered [fltsim.xx] entry
altering the .xx with the next sequential number
[fltsim.xx]
title=DHC-2F VH-CXS
sim=FSX_DHC-2F
model=float4
panel=
sound=
texture=VH-CXS
kb_checklists=DHC-2F_check
kb_reference=DHC-2F_ref
ui_manufacturer=de Havilland Canada
ui_type=DHC-2 Floats 5 Seats
ui_variation=Cairns seaplanes
ui_typerole="Single Engine Prop"
atc_heavy=0
atc_id=VH-CXS
atc_airline=
atc_flight_number=
atc_parking_types=RAMP
ui_typerole="Single Engine Prop Amphib"
ui_createdby="Aerosoft"
description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd.
from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a
MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver
was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored
and service for tourist flights,transportation and fun all around the world, Cairns Seaplanes re-paint by Gizmo
Feedback comments ect ect ect can be sent to me at
gizmoskins@googlemail.com
Or you can find me at the Ozx forums
http://www.aussiex.org/index/news.php
Nvnews.net FSX thread
http://www.nvnews.net/vbulletin/showthread.php?t=78216&page=113
Feel free to spread this re paint around your fav FS fan sites just please be sure to credit me as the original author as this work remains my intellectual property
Peace
Gizmo
260 downloads
Submitted
-
AeroSoft/Dehavilland Beaver Reeflight.com.au VH-IMU
VH-IMU Reefflight.com.au repaint for Aerosoft BeaverX Payware model for FSX
http://www.aerosoft.com
Original copyright and intellectual property rights
Many thanks to aerosoft for both the wonderful BeaverX model and thanks to you for taking and interest in this repaint and thanks to Mitch for his wonderfull info and stories about flight VH-IMU this repaint its for you bud enjoy
How To Install:
Unzip the contents of this zip file to your
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian
Dir keeping folder paths intact
Open the
Microsoft Flight Simulator X\SimObjects\Airplanes\Aerosoft Beaver Amphibian\aircraft.cfg
file With notepad and add the following body of text under the last sequentialy numbered [fltsim.xx] entry
altering the .xx with the next sequential number
[fltsim.xx]
title=DHC-2A VH-IMU
sim=FSX_DHC-2A
model=amphib1
panel=
sound=
texture=VH-IMU
kb_checklists=DHC-2A_check
kb_reference=DHC-2A_ref
ui_manufacturer=de Havilland Canada
ui_type=DHC-2 Amphibian
ui_variation=Reef flight
ui_typerole="Single Engine Prop"
atc_heavy=0
atc_id=VH-IMU
atc_airline=
atc_flight_number=
atc_parking_types=RAMP
ui_typerole="Single Engine Prop Amphib"
ui_createdby="Aerosoft"
description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world, Reefflight.com.au re-paint by Gizmo
Feedback comments ect ect ect can be sent to me at
gizmoskins@googlemail.com
Or you can find me at the Nvnews.net FSX thread
http://www.nvnews.net/vbulletin/showthread.php?t=78216&page=113
Feel free to spread this re paint around your fav FS fan sites just please be sure to credit me as the original author as this work remains my intellectual property
please do not use or strip parts of this repaint as a base for your own work without my consent if i find this has happen i will request that the host site remove your work
Peace
Gizmo
241 downloads
Submitted
-
FSX Aerosoft Beaver N28S
FSX Aerosoft Beaver N28S Textures by Nathan Havercroft
------------------------------------------------------
Texture files only. The original BeaverX model by Aerosoft (http://www.aerosoft-shop.com/) is required. Thanks to the Aerosoft crew for allowing me to upload this repaint and for making the aircraft in the first place.
N28S - taken from http://www.dhc-2.com/id967.htm
c/n 855
54-1709 N8524
N28S*
Delivered 07/01/56
54-1709 US ARMY # 1552 L-20 No: 553 Command A-6
N8524 Western Nebraska Technical College, Sidney, NE
Since 1972
J. W Duff Aircraft Co., Denver, CO
Regd 05/95
N28S Harrison Ford - GBH Aviation, Santa Monica, CA
Regd 23/12/98
Active
Nathan H
February 2008
araig@sbcglobal.net
Add the texture folder to your Aerosoft Beaver Standard Wheels folder and the following lines to the aircraft.cfg file.
[fltsim.XX] <-- where XX is the next available number
title=DHC-2F N28s
sim=DHC-2W
model=wheel6
panel=
sound=
texture=n28s
kb_checklists=DHC-2F_check
kb_reference=DHC-2F_ref
ui_manufacturer=de Havilland Canada
ui_type=DHC-2 Wheels
ui_variation=N28S (Harrison Ford)
atc_heavy=0
atc_id=N28S
atc_airline=
atc_flight_number=
atc_parking_types=RAMP
description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world.\n\n repaint by Nathan Havercroft
atc_id_color=0000000000
visual_damage=0
520 downloads
0 comments
Submitted
-
Aerosoft Beaver in 1950s US Coastguard Livery
By ChrisB
Purely fictional because the USCG did not have Beavers - or L20-As as they were known. This one wears the Annette Island USCG base name because that's where the USCG had a base in Alaska. Ideal (almost) for 'Memoriy Lane-ing' around Tongass Fjords
663 downloads
0 comments
Submitted
-
BeaverX Bare Metal.zip
By Guest
Originally requested by a forum member, this bare metal finished repaint of the BeaverX has the registration of a former KLM prop aircraft.
This is a first attempt at a metal finish and could be considered a flying test bed, so if you have any changes, alterations or additions that you would like to make to this file my contact E-Mail is in the installation instructions and I will try my best to assist.
I would also welcome any comments or suggestions on the repaint.
410 downloads
0 comments
Submitted
-
0 comments
Submitted
-
Beaver Repaint CF-JAT
By araig
Eastern Provinical Airways CF-JAT floats by Nathan Havercroft
164 downloads
0 comments
Submitted
-
Beaver Repaint CF-JAT Skis
By araig
Eastern Provincial Airways CF-JAT Skis by Nathan Havercroft
183 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
Beaver Repaint - Alaska Civil Air Patrol
By araig
Alaska Civil Air Patrol Beaver by Nathan Havercroft
415 downloads
0 comments
Submitted
-
0 comments
Submitted
-
West Coast Air DHC-2 Floats
By DMacAir1
Thanks for downloading! This is a repaint of the Aerosoft DHC-2 Beaver in the colours of West Coast Air of BC. Credit goes to Tony Hisgett for the photo used in the repaint and thumbnail, Paint.NET for the editing, Aerosoft for the aircraft, paint kit and other additional textures (bump maps, interior, etc...). I realize that there are issues with this paint, and if anyone has made edits and would like to re-post them or send them to me, feel free, however ensure to give credit to myself and these organizations/people if uploading. Not to be redistributed as payware. --------------------------------------------------------------------------------- Created by Dmac Macon --------------------------------------------------------------------------------- INSTRUCTIONS: 1 - Place folder "texture.WCAirNC" in "Aerosoft Beaver Floats 5 Seats", which is located in C:/Program Files (or Program Files (x86))/Microsoft Games/SimObjects/Airplanes 2 - Open up the "aircraft.cfg" in the Beaver Floats folder that has the "texture.WCAirNC" in it with notepad 3 - After the last set of lines beginning with [fltsim., place the following... [fltsim.X] title=C-FEBE WCA New sim=FSX_DHC-2F model=Float4 panel= sound= texture=WCAirNC kb_checklists=DHC-2F_check kb_reference=DHC-2F_ref ui_manufacturer=de Havilland Canada ui_type=DHC-2 Floats 5 Seats ui_variation=West Coast Air NC ui_typerole="Single Engine Prop" ui_createdby="Aerosoft" atc_heavy=0 atc_id=C-FEBE atc_airline= atc_flight_number= atc_parking_types=RAMP description=The civilian version DHC-2 Beaver was was manufactured by de Havilland Aircraft of Canada, Ltd. from 1948 to 1969. The MKI is the mostly spread version witha 450 SHP Pratt & Whitney R985. Alternatively a MKII was developed with 550 SHP Alvis Leonides 502/4 engine. Later the less common PT6A6 turboprop powerd Beaver was built between 1964 to 1969. In total almost 1700 plans were built and many of them are beautifully restored and service for tourist flights,transportation and fun all around the world. 4 - Change the "X" in the [FLTSIM.X] line above to the number after the one in the fltsim section above to continue the consecutive series of numbers 5 - Save the aircraft.cfg and fly! -------------------------------------------------------------------------------- If you have any questions, jot a PM to DMacAir1 on the Aerosoft forum.233 downloads
0 comments
Submitted
-
Files
-
-
Download Statistics
