Er!k 572 Posted December 15, 2014 Share Posted December 15, 2014 Hi Aerosoft, As previously reported, the standby attitude indicator is still going crazy if you press the B button. Previously this only happened in the A320/A321, but after v1.20B I also noticed this in the A318/A319 as well. Can you please fix this? Link to comment Share on other sites More sharing options...
cgentil 163 Posted December 15, 2014 Share Posted December 15, 2014 Please fix that before close project. Link to comment Share on other sites More sharing options...
Emi 5161 Posted December 15, 2014 Share Posted December 15, 2014 We'll have a look into that again, don't worry. It seems to be a bit more complex problem though. Link to comment Share on other sites More sharing options...
Eric Olson 0 Posted December 22, 2014 Share Posted December 22, 2014 From my experience, only happens AFTER the plane has been airborne and then has landed. If you hit it on the ground of your arrival airport, it will "bottom out" setting it to 27.99 (or whatever the minimum is) without the ability to change it. Link to comment Share on other sites More sharing options...
PikalaxALT 19 Posted December 25, 2014 Share Posted December 25, 2014 From my experience, only happens AFTER the plane has been airborne and then has landed. If you hit it on the ground of your arrival airport, it will "bottom out" setting it to 27.99 (or whatever the minimum is) without the ability to change it. It also happens if you go back to local QNH on descent across transition level, even without pressing 'B' (manual selection of baro ref). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.