FS9 Flightplan format

[Axel H 10]

Hallo,

would it be possible in one of the next updates to remove the first portion of each waypoint?

Example:

this is what PFPX exports at the moment:

[flightplan]
AppVersion=9.0.30612
title=EDDP to LOWW
description=EDDP, LOWW
type=IFR
routetype=3
cruising_altitude=32000
departure_id=EDDP, N51* 25.40', E12 *14.20', +000470.00
departure_position=26L
destination_id=LOWW, N48* 07.60', E16 *34.20', +000600.00
departure_name=LEIPZIG-HALLE
destination_name=SCHWECHAT
waypoint.0= , EDDP, , EDDP, A, N51* 25.40', E12 *14.20', +000470.00,
waypoint.1= , TORPU, , TORPU, I, N51* 10.20', E13 *13.60', +000000.00, DCT
waypoint.2= , RIVSA, , RIVSA, I, N51* 07.50', E13 *22.00', +000000.00, UZ21
waypoint.3= , DRN, , DRN, V, N51* 01.90', E13 *36.90', +001051.00, UZ21
waypoint.4= , RIKLU, , RIKLU, I, N50* 56.90', E13 *49.70', +000000.00, UZ21
waypoint.5= , OMELO, , OMELO, I, N50* 50.30', E14 *00.00', +000000.00, UZ21
waypoint.6= , VOZ, , VOZ, V, N49* 32.90', E14 *52.50', +002200.00, UZ21
waypoint.7= , OKF, , OKF, V, N48* 58.20', E15 *33.70', +001600.00, UM725
waypoint.8= , LANUX, , LANUX, I, N48* 53.30', E15 *37.90', +000000.00, UM725
waypoint.9= , LOWW, , LOWW, A, N48* 07.60', E16 *34.20', +000600.00, DCT

Can it be changed to the following, with only focus on each waypoint and the first part removed without affecting any add-on that requires the first part?

[flightplan]
AppVersion=9.0.30612
title=EDDP to LOWW
description=EDDP, LOWW
type=IFR
routetype=3
cruising_altitude=32000
departure_id=EDDP, N51* 25.40', E12 *14.20', +000470.00
departure_position=26L
destination_id=LOWW, N48* 07.60', E16 *34.20', +000600.00
departure_name=LEIPZIG-HALLE
destination_name=SCHWECHAT
waypoint.0=EDDP, A, N51* 25.40', E12 *14.20', +000470.00,
waypoint.1=TORPU, I, N51* 10.20', E13 *13.60', +000000.00, DCT
waypoint.2=RIVSA, I, N51* 07.50', E13 *22.00', +000000.00, UZ21
waypoint.3=DRN, V, N51* 01.90', E13 *36.90', +001051.00, UZ21
waypoint.4=RIKLU, I, N50* 56.90', E13 *49.70', +000000.00, UZ21
waypoint.5=OMELO, I, N50* 50.30', E14 *00.00', +000000.00, UZ21
waypoint.6=VOZ, V, N49* 32.90', E14 *52.50', +002200.00, UZ21
waypoint.7=OKF, V, N48* 58.20', E15 *33.70', +001600.00, UM725
waypoint.8=LANUX, I, N48* 53.30', E15 *37.90', +000000.00, UM725
waypoint.9=LOWW, A, N48* 07.60', E16 *34.20', +000600.00, DCT

best regards,

Axel

[Dimon 3]

same issue here.

[FlightSimSoft.com 283]

Yes, will be fixed for next release!

[Axel H 10]

Yes, will be fixed for next release!

Thank You!