kdt 6 Posted July 9, 2020 Share Posted July 9, 2020 How can i delete this ROUTE DISCONTINUITY? See at the picture. Thanks for Help Klaus Please login to display this image. Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 9, 2020 Share Posted July 9, 2020 You have to "lift up" the portion you want and put it in the place of the discont. I'm this case, press key L3, then L2, then hit EXEC Not all discounts can be cleared this way. This could be one, this looks like an arc without a clear start waypoint, which would be needed to connect the dots. Try selecting a different transition, or pick a waypoint along that arc (refer to the charts for this) Cheers! Link to comment Share on other sites More sharing options...
kdt 6 Posted July 9, 2020 Author Share Posted July 9, 2020 First of all, thanks for the answer. Unfortunately, this does not work because the DISCONTINUITY is not next to an LSK button. Normally there should be 5 squares to the left of the DISCONTINUITY in which I can enter the waypoint. When I use LSK3 and then LSK2 I get the message "not allowed" or "not in Data Base". Klaus Link to comment Share on other sites More sharing options...
kdt 6 Posted July 9, 2020 Author Share Posted July 9, 2020 That's actually what it means. It is an image from the Crj manual. Thanks Klaus Please login to display this image. Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 9, 2020 Share Posted July 9, 2020 What approach is this? And what RJ + sim version? Link to comment Share on other sites More sharing options...
kdt 6 Posted July 9, 2020 Author Share Posted July 9, 2020 1.Approach LOWI RWY 08Y but it doesn't work with any Waypoint or Approach 2.FSX 3.rj 700/900 it's the same Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 9, 2020 Share Posted July 9, 2020 So what I'm reading is that you're trying to do an old arc approach that doesn't exist? LOWI doesn't have an arc to 08 anymore. Did you pull this from the database, or are you building it yourself? (and then, which database are you using?) Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 9, 2020 Share Posted July 9, 2020 Either way, doesn't really make a difference. Gonna point you back to this portion of my first answer: 5 hours ago, A_Pilot said: Not all discounts can be cleared this way. This could be one, this looks like an arc without a clear start waypoint, which would be needed to connect the dots. Try selecting a different transition, or pick a waypoint along that arc (refer to the charts for this) Here's the reference out of the manual, just to prove I'm not out to lunch: Please login to display this image. If that arc is not in the approach database, "building" it in the FMS won't work (and is illegal, per EASA), and the transition should therefore be flown in green needles without using the FMS. Happy flying Link to comment Share on other sites More sharing options...
kdt 6 Posted July 9, 2020 Author Share Posted July 9, 2020 The Data Base is from Navigraph 07.2020. the discontinuty in my fmc looks different from that in the crj manual. Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 9, 2020 Share Posted July 9, 2020 It looks different because it's one of the ones that can't be deleted, perhaps. I don't know what else to tell you. The discontinuity you're trying to delete cannot be deleted, not in the Aerosoft CRJ, not in the real CRJ. The snippet I have you comes from the manual for the real FMS 4.2, for the real CRJ, of which I am a real trainer on. The first picture you posted matches the format of discontinuities from the real plane. And trying to delete a discontinuity that can't be deleted will indeed give you "not allowed" I'm not sure why you have an arc in there in the first place, the RNP 08 to LOWI doesn't have one. Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted July 9, 2020 Share Posted July 9, 2020 The LEGS page would be the proper place to clear a discontinuity, rather than the FPLN page. There are some other problems though. You are trying to load an RNP approach, and a real CRJ is not legally authorized or even capable of flying an RNP-based RNAV approach. In the real aircraft database, none of the LOWI approaches prefixed with “RNP” would even appear on the approach page as options. You would be limited to the LOC 26, or the LOC DME E or LOC DME W. In the Navigraph database, every available approach for a given airport will be present. Although the sim version of the CRJ might try to load an RNP procedure, there is no guarantee it will be able to make sense of it or fly it correctly. For one thing, RNP requires an aircraft with a full VNAV system, which the CRJ doesn’t have. Link to comment Share on other sites More sharing options...
kdt 6 Posted July 11, 2020 Author Share Posted July 11, 2020 Thanks Klaus Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.