Flightrookie 504 Posted October 15, 2019 Share Posted October 15, 2019 Moin Zusammen, Zibo eine neue Version, die B737-800X_3_37_full.zip, hochgeladen. Hier die Release note: ------------- 3.37 full realease: ------------------- - add airstairs textures for AXP liveries (thanks to @enjxp) - add command Airstairs toggle - add toggle commands for lights - add support librain plugin (by Skiselkov) in VR (thanks to @Ekre) - add option for Ground power cabel connection - AUTO/BEACON (trigger) - add option for white bug on PFD (V2+15 or V2+20) - add opton Fix all failures on EFB (with detection custom failures) - add option FMC input lag (default OFF) - add option for XHSI (default OFF) - add option hard/smart/off for RA callouts (500ft, 1000ft, 2500ft) - add SKI effect to cabin windows - add option AUTO for passengers - gently tuned AP, AT - corrected graphics (EICAS, PFD rolling speed and alt tape, TCAS rings, heading rose on PFD, runway on PFD, ...) - corrected ND during align - add Cancel/Recall button on MFD - corrected systems (electric, hydraulic, bank angle selector...) - modeled LOC by RL pilot experience - add LOC/GLS disagree on PFD (frequency/course) - add automatic connect ground power cable after arrival to gate - add crossbleed start engine annunciate on EICAS/ENG - add manipulators for electric trim on yokes - add touchdown effect (not working in replay yet for Xplane 11.36 - working in Xplane 11.40) - tuned Autoland for new AP pitch servo code and new ROLLOUT code - add flaps vibration on the ground - fixed decode/populate STAR waypoints (with STAR and Destination Runway selected only) - fixed pressurization display - fixed FD TO/GA - add pages to FMC (some pages have static datas yet) - new electric system (modeled all basic buses, TR Units, Relays / all devices, systems,...) - add failures system (electric/hydraulic/systems... see EFB main menu) - add refuel system (see EFB ground services menu) - add Fueltruck and icons for Fueltruck, Failures... (thanks to @JBRIK) - read apt data from folder "Custom Scenery" too - fixed bugs Note1: "Fix all failures" - it fixed all failures: custom and xplane. You can fix failures on the ground and when plane stopped only. Caution: Remeber, if you set custom failure in flight, you can not fix any failures (fix failures on the ground only). Note2: Refuel - conditions: no engine running and aircraft can't move, set required fuel on page "Fuel, payload..." and use command "Call fueltruck" on page "Ground services". If you set "Refuel time" to short, you can't use fuel truck, fuel will add immediately. Note3: Ground power cabel connection - trigger AUTO: engines shutdown and APU not connected on bus (APU condition only after load plane at gate), - trigger BCN: engines shutdown and Anti-collision lights OFF Link to comment Share on other sites More sharing options...
ebitennis1 9 Posted October 19, 2019 Share Posted October 19, 2019 On 15.10.2019 at 07:46, Flightrookie sagte: Moin Zusammen, Zibo eine neue Version, die B737-800X_3_37_full.zip, hochgeladen. Hier die Release note: ------------- 3.37 full realease: ------------------- - add airstairs textures for AXP liveries (thanks to @enjxp) - add command Airstairs toggle - add toggle commands for lights - add support librain plugin (by Skiselkov) in VR (thanks to @Ekre) - add option for Ground power cabel connection - AUTO/BEACON (trigger) - add option for white bug on PFD (V2+15 or V2+20) - add opton Fix all failures on EFB (with detection custom failures) - add option FMC input lag (default OFF) - add option for XHSI (default OFF) - add option hard/smart/off for RA callouts (500ft, 1000ft, 2500ft) - add SKI effect to cabin windows - add option AUTO for passengers - gently tuned AP, AT - corrected graphics (EICAS, PFD rolling speed and alt tape, TCAS rings, heading rose on PFD, runway on PFD, ...) - corrected ND during align - add Cancel/Recall button on MFD - corrected systems (electric, hydraulic, bank angle selector...) - modeled LOC by RL pilot experience - add LOC/GLS disagree on PFD (frequency/course) - add automatic connect ground power cable after arrival to gate - add crossbleed start engine annunciate on EICAS/ENG - add manipulators for electric trim on yokes - add touchdown effect (not working in replay yet for Xplane 11.36 - working in Xplane 11.40) - tuned Autoland for new AP pitch servo code and new ROLLOUT code - add flaps vibration on the ground - fixed decode/populate STAR waypoints (with STAR and Destination Runway selected only) - fixed pressurization display - fixed FD TO/GA - add pages to FMC (some pages have static datas yet) - new electric system (modeled all basic buses, TR Units, Relays / all devices, systems,...) - add failures system (electric/hydraulic/systems... see EFB main menu) - add refuel system (see EFB ground services menu) - add Fueltruck and icons for Fueltruck, Failures... (thanks to @JBRIK) - read apt data from folder "Custom Scenery" too - fixed bugs Note1: "Fix all failures" - it fixed all failures: custom and xplane. You can fix failures on the ground and when plane stopped only. Caution: Remeber, if you set custom failure in flight, you can not fix any failures (fix failures on the ground only). Note2: Refuel - conditions: no engine running and aircraft can't move, set required fuel on page "Fuel, payload..." and use command "Call fueltruck" on page "Ground services". If you set "Refuel time" to short, you can't use fuel truck, fuel will add immediately. Note3: Ground power cabel connection - trigger AUTO: engines shutdown and APU not connected on bus (APU condition only after load plane at gate), - trigger BCN: engines shutdown and Anti-collision lights OFF Hi Flightrookie, finde ich ganz toll, dass du so ausführlich die Änderungen der ZIBO beschrieben hast. normalerweise lädt man sich die neue Version und weiß nicht was sich geändert hat. ( jedenfalls mach ich das meistens so ). Danke, großes Lob VG Eberhard Link to comment Share on other sites More sharing options...
Flightrookie 504 Posted October 19, 2019 Author Share Posted October 19, 2019 vor 3 Stunden , ebitennis1 sagte: Hi Flightrookie, finde ich ganz toll, dass du so ausführlich die Änderungen der ZIBO beschrieben hast. normalerweise lädt man sich die neue Version und weiß nicht was sich geändert hat. ( jedenfalls mach ich das meistens so ). Danke, großes Lob VG Eberhard Vielen Dank, Eberhard. Wenn du die Full-Versionen oder Updates runterlädst, dann ist in dem Archiv eine README.txt, die sämtliche Änderungen beschreibt. So bleibt man immer auf dem Laufenden. Viele Grüße Horst Link to comment Share on other sites More sharing options...
ebitennis1 9 Posted October 20, 2019 Share Posted October 20, 2019 vor 18 Stunden , Flightrookie sagte: Vielen Dank, Eberhard. Wenn du die Full-Versionen oder Updates runterlädst, dann ist in dem Archiv eine README.txt, die sämtliche Änderungen beschreibt. So bleibt man immer auf dem Laufenden. Viele Grüße Horst ok, danke Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.