Jump to content
Sign in to follow this  
Elmerson

A3XXConnectPro again .. but not the same problem ...

Recommended Posts

Hello.

I have problems with A3XXConnectPro but differently than I have seen reported on the forum.

I can connect with my tablet network, all right.

With the aircraft stopped, all right.

When I begin to move the aircraft, they start long stutters making it impossible to proceed with the simulation.

There is also a curious effect: when loading a new scenario, the load practically freezes to about 42%. As soon as A3XXConnect is closed, the load will restart without problems. Probably the scenario loading problem is what causes the stutters in flight.

Antivirus and firewall disabled.

Any idea?

Thank you!

Elmerson Pitrowsky

 

 

Share this post


Link to post

That's one we have not seen before. So it seems the webserver slows down your sim a lot. Can you activate logging (in the config tool) and send us a log?

Share this post


Link to post

Here it is:

 

Aircraft on holding point, tablet conected and working:

 

[09/10/2018 10:10:51:173]: A3XXConnectPro.exe: BEGIN; LOG: C:\Users\Elmerson\Documents\Aerosoft\Aerosoft A320-A321 Professional\Data\A3XXConnectPro.ini.
[09/10/2018 10:10:51:173]: Dataflags: 1, 1, size=0x00000000.
[09/10/2018 10:10:51:173]: Module version: 1.2.1.8. Date/time: 28/09/2018 14:00:00.
[09/10/2018 10:10:52:177]: Starting the SimConnect thread...
[09/10/2018 10:10:52:177]: SimConnect thread started: [0x140], 1448.
[09/10/2018 10:10:52:177]: Starting the webserver (main) thread...
[09/10/2018 10:10:52:177]: Webserver (main) thread started: [0x144], 9188.
[09/10/2018 10:10:52:180]: <CallDispatch>: 0x0.
[09/10/2018 10:10:52:180]: PIPE: The named pipe, \\.\pipe\MCDU_Input, is connected.
[09/10/2018 10:10:52:183]: Webbrowser IP: 10.0.0.11.
[09/10/2018 10:10:52:185]: FSX online.
[09/10/2018 10:10:52:211]: Open: AppName="Lockheed Martin® Prepar3D® v4"  AppVersion=4.3.29.25520  SimConnectVersion=4.3.0.0
[09/10/2018 10:10:52:211]: [Event]: Sim pause state: 0.
[09/10/2018 10:10:52:211]: PLANE_LOADED, AIR file: C:\Users\Elmerson\Documents\Aerosoft\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320 CFM Professional\A320.air.
[09/10/2018 10:10:52:211]: [Event]: Title received: Airbus A320 Whitejets Airways PR-WTB; 
[09/10/2018 10:10:52:743]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18264 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:02:729]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18261 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:12:742]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18257 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:22:728]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18253 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:32:743]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18249 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:42:734]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18245 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:11:51:991]: PIPE: Sends 2 bytes; Code: 0
[09/10/2018 10:11:52:748]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18241 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:12:02:731]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18237 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:12:04:247]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:05:252]: PIPE: Sends 2 bytes; Code: 20
[09/10/2018 10:12:06:459]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:06:573]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:06:588]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:08:325]: PIPE: Sends 2 bytes; Code: 20
[09/10/2018 10:12:09:929]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:11:220]: PIPE: Sends 2 bytes; Code: 12
[09/10/2018 10:12:12:746]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18234 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:12:14:732]: PIPE: Sends 2 bytes; Code: 22
[09/10/2018 10:12:15:777]: PIPE: Sends 2 bytes; Code: 21
[09/10/2018 10:12:22:728]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18230 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:12:23:221]: PIPE: Sends 2 bytes; Code: 26
[09/10/2018 10:12:23:376]: PIPE: Sends 2 bytes; Code: 26
[09/10/2018 10:12:23:385]: PIPE: Sends 2 bytes; Code: 26
[09/10/2018 10:12:23:967]: PIPE: Sends 2 bytes; Code: 26
[09/10/2018 10:12:30:212]: PIPE: Sends 2 bytes; Code: 0
[09/10/2018 10:12:32:746]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2473 Ft; Hdg=185; Distance=0.00 NM; CurrentFuelTotal=18226 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:12:36:793]: CloseSimconnectThread...
[09/10/2018 10:12:36:894]: SimConnection closed: 0, [0x140].
[09/10/2018 10:12:36:894]: SimConnect thread finished.
[09/10/2018 10:12:36:894]: CloseSimconnectThread complete
[09/10/2018 10:12:36:894]: PIPE: Sends MSG_PIPE_CLOSE, 2 bytes.
[09/10/2018 10:12:36:894]: CloseWebserverThread...
[09/10/2018 10:12:37:289]: Webserver (main) thread finished: [0x3C7880].
[09/10/2018 10:12:37:289]: CloseWebserverThread complete
[09/10/2018 10:12:37:289]: A3XXConnectPro.exe: END.

 

 

Loading a new scenery:  (A3XXConnect closed when loading scenery freezes).

 

[09/10/2018 10:07:13:463]: A3XXConnectPro.exe: BEGIN; LOG: C:\Users\Elmerson\Documents\Aerosoft\Aerosoft A320-A321 Professional\Data\A3XXConnectPro.ini.
[09/10/2018 10:07:13:463]: Dataflags: 1, 1, size=0x00000000.
[09/10/2018 10:07:13:463]: Module version: 1.2.1.8. Date/time: 28/09/2018 14:00:00.
[09/10/2018 10:07:14:478]: Starting the SimConnect thread...
[09/10/2018 10:07:14:478]: SimConnect thread started: [0x140], 9060.
[09/10/2018 10:07:14:478]: Starting the webserver (main) thread...
[09/10/2018 10:07:14:478]: Webserver (main) thread started: [0x144], 4248.
[09/10/2018 10:07:14:479]: <CallDispatch>: 0x0.
[09/10/2018 10:07:14:479]: PIPE: The named pipe, \\.\pipe\MCDU_Input, is connected.
[09/10/2018 10:07:14:482]: Webbrowser IP: 10.0.0.11.
[09/10/2018 10:07:14:483]: Open: AppName="Lockheed Martin® Prepar3D® v4"  AppVersion=4.3.29.25520  SimConnectVersion=4.3.0.0
[09/10/2018 10:07:14:484]: FSX online.
[09/10/2018 10:07:14:485]: [Event]: Sim pause state: 0.
[09/10/2018 10:07:14:485]: PLANE_LOADED, AIR file: C:\Users\Elmerson\Documents\Aerosoft\Aerosoft A320-A321 Professional\SimObjects\Airplanes\Aerosoft A320 CFM Professional\A320.air.
[09/10/2018 10:07:14:516]: [Event]: Title received: Airbus A320 Whitejets Airways PR-WTB; 
[09/10/2018 10:07:14:718]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2651 Ft; Hdg=348; Distance=0.00 NM; CurrentFuelTotal=18326 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:07:24:713]: [Event]: Flight data received: IAS=0 Kts; Mach=0.00 M; Alt=2651 Ft; Hdg=348; Distance=0.00 NM; CurrentFuelTotal=18322 LBS; Ground speed=0 Kts; Vert speed=0.00 feet/sec; NextWP=.
[09/10/2018 10:07:31:480]: [Event]: Sim pause state: 1.
[09/10/2018 10:08:09:267]: CloseSimconnectThread...
[09/10/2018 10:08:09:368]: SimConnection closed: 0, [0x140].
[09/10/2018 10:08:09:368]: SimConnect thread finished.
[09/10/2018 10:08:09:368]: CloseSimconnectThread complete
[09/10/2018 10:08:09:368]: PIPE: Sends MSG_PIPE_CLOSE, 2 bytes.
[09/10/2018 10:08:09:368]: CloseWebserverThread...
[09/10/2018 10:08:11:368]: CloseWebserverThread complete
[09/10/2018 10:08:11:368]: A3XXConnectPro.exe: END.

 

 

 

Share this post


Link to post

Please post what solved it so others can learn from it. Thanks in advance.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...