Jump to content


  • Posts

  • Joined

  • Last visited

About Jetjockey10

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Jetjockey10's Achievements


Rookie (2/14)

  • First Post Rare
  • Collaborator Rare
  • Conversation Starter Rare
  • Week One Done
  • One Month Later

Recent Badges



  1. All worked fine at smaller airports but, choked when attempting to load a large airport. Gave up after 3 hours. Regards, Ray
  2. My thoughts are rather simple. There are some (3) FedEx liveries parked at Passenger Gates at KMEM but none on the Cargo ramp. The Cargo ramp has a nice mix of Passenger Airliners like Frontier, Delta, etc, but, no FedEx liveries. Because the FedEx livery obviously exists in Simple Traffic can a file to inserted to replace one or more of the airliners that are parked on the Cargo Ramp there from time to time? Just a thought. Regards, Ray
  3. I have only been running Simple Traffic for less than an hour, but, I am super pleased with my first encounter. KMSY New Orleans. I am at KMEM Memphis now and a bit disappointed that I can't see any FedEx Cargo planes. This is the Super Hub and should be full of Fed Ex cargo operations. The airliners at the passenger gates seem to be correct. Oops. I just found the Fed Ex planes at the passenger gates, none on the cargo ramp. My question now is how do I get FedEx Cargo planes to show up where they are supposed to? The instant download and install was a breeze using the new Aerosoft One. kudos for that. Ray
  4. I purchased the CRJ on the first day of release but have been away from my pc ever since. I can't find where to start the Super Simple Aerosoft Updater. I purchased directly from Aerosoft. 16 Mar 2021 17:38:00 Order No. 1120305092. Can someone please assist me? Regards, Ray
  5. I have win10 and the CRJ 550/700 with no updates to date. I purchased the CRJ on day of release directly from Aerosoft, but have been away from my pc ever since. Using the Windows Start button, I only see two choices under Aerosoft Aircraft CRJ 550-700 - Manuals and Uninstall. Can you please point me to the Updater? Regards,
  6. New repaint is ready for downloading. Here is a link for major airports on the islands. My first run is from Kauai to Maui. Short but sweet with an overfly of PHNL Honolulu Intl. Thanks to riskas123 for knocking out this unique and custom repaint prior to the release of the CRJ paintkit. https://www.wheretraveler.com/hawaii/hawaii-airports-guide All the MSFS airports need some updates. Make your wishes known and hopefully we can create some interest iin the developer community. Ray livery download link
    Just downloaded it and am firing up the sim to check it out. It is great to have the Hawaiian colors flying on a CRJ. Thanks a million for this repaint - way earlier than I was expecting. More later. Ray Ist Hawaiian Islands flight is from Kauai (Lihue) to Maui (Kahului). Short flight but, I get to overfly Honolulu Intl and show off our new CRJ. Looks like it belongs here. Thanks.
  7. Absolutely. Total freedoms are fully expected. Lots of folks will be flying the Hawaiian Islands when this livery is available.Thanks. Ray
  8. Hello chemesherpa, I have a very similar setup of the Saitek/Logitech gear and I have SpadNext. Have you made or found a CRJ Profile for SpadNext? Regards, Ray
  9. Interesting concept. Thanks for sharing. Do you have the full hardware package? I am waiting for the Add-ons to be delivered. Regards, Ray
  10. Would someone that is happy using your Airbus TCA hardware with the CRJ post your Sensitivity Settings (curves) for both the SideStick and the Throttles Quadrant? This would be greatly appreciated. Regards, Ray
  11. I finally have my TCA throttles working close enough to stop messing with them any longer. However, I am near clueless on what the preferred Sensitivity Settings for the two throttles should be for this CRJ setup. I also would like to be better informed (also near clueless) on the GAP settings. I see a fairly large range of settings available using the EFB Calibrate Throttles page. Not that this is recommended or even correct, but, these are the numbers I am using today and they work better than anything I was using previously. The quadrant IN THE SIM is still a little jumpy at times and the alignment between the two thrust levers aren't always perfectly matched, but, they are certainly close enough to move on and learn to fly this wonderful new CRJ. I started with the Options/Controls/TCS Q-ENG 1 & 2 in the basic MSFS sim and reassigned the two Throttles from the (0 - 100% setting) to the Throttle Axis 1 and 2 setting for both throttles. First, delete the two existing assignment using the 0 - 100%. Make sure you are assigning Joystick L - Axis X for #1 and Joystick L - Axis Y for #2. See image below. It is important to NOT CHECK the Reverse Axis box here. I RESET the X and Y Joystick L -Axis curves to be totally linear. (for now) SAVE your file now. There is a lot of bogus and bad suggestions throughout this thread. My suggestion is to try it and see what works for you and if the movement is backwards then try the other setting - it is either checked or not checked. btw, the movement of the throttle is actually reversed in the Options/Controls view in the basic MSFS sim, but, is correct in the CRJ. (go figure). OK, after watching a bunch of videos and reading every post in this thread, duh, I decided these were the working number for me using the EFB calibration page in the CRJ. As stated above, I don't know how the GAP numbers affect the settings, these, do not return any errors on the Validation check. Max Power 16384 / 16384 TOGA 6633 / 6468 Climb 301 / 394 Idle -8382 / -8586 Rev Max -16384 / -16384 Yes, I do notice the #1 and #2 numbers do not match and THAT IS INTENTIONAL. I tweaked the numbers so the IN SIM view would appear to match. This may create a problem in flight, but, I have to learn to fly before fine tuning N1 to less than 1 percent settings. This might be corrected using the allen wrench and adjusting the physical movement of the TCA hardware. I am just not ready for that level of adjustment, yet, maybe another day when I better understand the small glitches. This may also be solved by adjusting the sensitivity settings, who knows? As you may have heard - "your mileage may vary, use at your own risk". Regards, Ray Good luck.
  12. Jay 340, thanks for your post and video. This was very helpful for me, especially showing the selection of the detents on the Airbus yoke. Do your detent settings match with the detent markings on the Sim yoke? Could you explain, maybe show, your new Sensitivity settings? Regards, Ray
  • Create New...