-
Posts
65 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Pilot Pete
-
-
20 minutes ago, frumpy said:
Hi Pete,
in the german section of the forum this behaviour of the Airbus Prof. after installing the latest installers was recognized as well. Look here. Aerosoft devs maybe found one reason and you can try the offered solution. It seems that not all errors are eliminated with the new dll but at least you can go on.
Jan
Thanks Jan, I will give that a look and see if it fixes the issue.
Cheers, Pete
-
Hello - I reinstalled the Airbus Professional A318/319/320/321 package for P3Dv5 after the most recent update. When I use Shift + 4 to go to the FMC setup, and I select Aircraft state “Take-Off State,” the white line “Take-Off State” just continues to blink, and the aircraft state never initializes. If I go to the “Load/Fuel” page I can’t even enter the loads either. I am not sure how to resolve this, as I have had the Airbus Professional packages since they were released years ago. Right now they are unusable, so any assistance would be most appreciated. Thanks in advance.
Cheers, Pete
-
7 hours ago, Jonas S. said:
Hi Pete,
I assume you downloaded the additional SODE files via https://sode.aerosoft.com? Did you use the included batch files to turn on SODE for this scenery?
Hi Jonas - I downloaded those SODE files last night but I think I am confused as to where the files go. I can’t seem to fix the issue. The readme file was confusing to me, are you able to provide more detail as to how to install the SODE pack? Thanks so much for your assistance!
Cheers, Pete
-
As the title says, I have no idea how to fix this. I feel like I have tried everything but the red "X" remain over every jetway at EDDM. I am using P3dv5. Thanks in advance for any assistance.
Cheers, Pete
-
Tom - I just went back in and now in PMDG FMC “Ident” it says “AIRAC-2014 DEC 31JAN27/21. This is up to date now. Not sure what the problem was.
Thanks, Pete
-
Thanks for such a quick response! Yes, account is valid for a few more months.
Pete
-
Hello - I suddenly have a problem in P3dv5 updating my pmdg aircraft with the latest cycle. This is the first time this issue has presented itself and I have not changed the path from the last update. Is there an issue with this update? How can I solve this issue?
Thanks, Pete
-
On 7/6/2020 at 2:11 AM, Mathijs Kok said:
I will check this out. However the paths should almost always be near identical.
Thanks Mathijs.
-
Hello - These are the only aircraft listed under the P3d v5 menu:
Aerosoft A318/A319/A320/A321/A330
PMDG 737
Aerosoft CRJ Professional
Will these other aircraft be added?
Thanks, Pete
-
Hello - When I went to install EDDF into P3d v5 I got a "severe warning" regarding a trojan virus. Is it safe to run this installer?
Severe Alert: Trojan:Win32/Occamy.C
Cheers, Pete
-
Considering that the site has been down for many folks for the past few days, and many missed out on the 25% sale, will something be done? I fortunately purchased a couple of my top items before the site went down, but was thinking of a couple of more and was unable to make those purchases.
Thanks, Pete
-
I have the same issue as Pete with my boxed version. Maybe it is a location issue, since it appear that Pete and I reside in the same area.
Hi Marty,
I work in Schaumburg and also rent airplanes out of Schaumburg Airport....neat seeing someone local in one of these forums!
Cheers, Pete
-
Hi Shaun,
I posted this under the release area which was probably not correct. Anyway, I have tried several times to update my boxed version of Budapest but everytime I get the message "Can't find Microsoft Flight Simulator." This message pops up after it approves my serial number and is ready for install. I did de-install the previous version as well. I have never seen this before so I am wondering if there is an issue with the new installer. Any help would be appreciated.
Thanks, Pete
-
1
-
-
Hi Shaun,
I have tried several times to update my boxed version of Budapest but everytime I get the message "Can't find Microsoft Flight Simulator." This message pops up after it approves my serial number and is ready for install. I did de-install the previous version as well. I have never seen this before so I am wondering if there is an issue with the new installer. Any help would be appreciated.
Thanks, Pete
-
I think two very good points are made there.
- Is a $70 add-on better then a $40 add-on? I bloody well hope so, certainly if the add-on costs more then the simulator itself. With PMDG however you can be sure that it is.
- A B737 is flown by two highly trained persons, supported by far more people. And you, dear customer, are most likely a nice guy who drinks a beer while flying the aircraft on a rainy evening. I am the first person to say the PMDG 737 is too complex for my taste. It needs at least between 20 and 30 hours to learn the basics and far more to learn the ins and outs. I can list you dozens of people who bought a complex aircraft and are not using it now. You'll never hear about them because nobody likes to let is know they are too 'stupid' to fly the PMDG 737. You never read a bad review about a product like this because it is so important and so good a bad review more or less means the reviewer does not understand it. Fact is that for a good deal of customers this is a step they should not take unless they are very very serious and got time.
I get PAID to play with FSX and I can't even bother to get to grips with this product. Does it mean it is not good? Of course not, it just means it is not a product for me. The few hours I spend in FSX not being paid are in the Katana or the Catalina. Aircraft that take a fraction of the time to understand and still rather serious simulations. Keeping the Katana in good shape takes some serious thinking and keeping the engines in the Catalina running in realistic mode baffled me more then a few times.
Knowing your limits is the mark of a good pilot. Real pilots and sim pilots.
Well said Mathijs!
- Is a $70 add-on better then a $40 add-on? I bloody well hope so, certainly if the add-on costs more then the simulator itself. With PMDG however you can be sure that it is.
-
Hello Pete,
What happens if you use the default FS9 textures instead of replacements!
No problems with default LOWW, all runways come back to normal. That said there is definitely and issue with the addon LOWW. Any ideas? For what it's worth, I installed LOWW on my other FS9 computer and have the exact same issue, so I know for sure that it is not specific to just one setup.
-
Hello Pete,
What happens if you load FS9 and go straight to Vienna does it show okay.
Hi Shaun,
Thanks for responding. I did try reloading from the start screen as well as restarting FS9 and going straight to Vienna to start. Unfotunately all had the same result. I have seen stuff like this happen before in FSX when there is a conflict with UTX but I have none of that stuff installed for FS9 so am out of ideas.
-
Hi,
I just installed the boxed version of Mega Airport Vienna X into FS9. On a flight (in FS9) from Budapest, once I got to Vienna for landing on LOWW rwy 29 the runway was just field, no pavement. Does anyone have any ideas as to what the problem can be? I have only REX for FS9 and FScene X installed for environment.
Thanks in advance for any assistance.
Cheers, Pete
-
Hi,
Don't worry, it's happened to me before!
Send an email to support@aerosoft.com and I'm sure your issue will get sorted out.
Chris
Thanks Chris!
-
Hello,
I just purchased Faro X and somehow ended up getting charged twice. How do I cancel the second order?
Thanks, Pete
-
It worked here. Try send a message to support@aerosoft.com. I always get help thru this email. But them i get another diferent error:
---------------------------
Luxembourg Airports Update - InstallShield Wizard
---------------------------
This update needs an installed version of Luxembourg Airports (V3.00). Please install Luxembourg Airports (V3.00)before you running this update again
---------------------------
OK
---------------------------
But, of course ver 3.00 is installed.
So i think it´s a buggy installer.
Thanks for the heads up; I will give that a shot.
Cheers, Pete
-
Anyone there?
-
I am trying to install the FSX 3.01 patch for Luxembourg and each time I try I get an error telling me either my email or serial number is invalid. However, this is not the case. I am becoming very frustrated since I logged into the FAQ/updates, added support for the Luxembourg scenery, but then can't install it. Any help would be appreciated.
Thanks, Pete
-
So now you wonder how I will merge these three topics into this news, right? We'll it's simple. We are going to give you Christmas gift in the form of a 50% discount on the Twin Otter (mainly because it is such so superbly suited for Maldives X). But we are also asking you to help us support the orphanage that Aerosoft adopted in Ethiopia. On the payment page you got the option to add a bit of money to your order for this cause. Feel good this Christmas and do click that button. These kids don't get iPhones, Xboxes etc. They are happy to get 3 meals a day and a bit of love, right?
That said, from all of us at Aerosoft, we wish you a very merry Christmas, hope it snows. And keep in mind simming is just a hobby, taking care of your family and loved ones is FAR more important.
Links: [Twin Otter product page] [Male X product page]
Tags: FSX DHC-6 Twin Otter X
Hi Shaun,
Can you tell me what date the sale on the Twin Otter runs until?
Thanks, Pete
Airbus Pro A320 Family - Aircraft State will not Initialize
in Everything else
Posted
This fixed the issue. Thanks!!
Cheers, Pete