Lambo 0 Posted January 13, 2013 Share Posted January 13, 2013 Hi all, I've been trying to test out the RNP support for the aircraft at KPBI using the RNAV (RNP) Z 10L approach. I am using the latest NavDataPro cycle. The issue I have been running across since release and after 1.03b is that for all the RNAV approaches into KPBI, there are no fixes listed under "VIA" For the screenshots below, this was done at KJAX and the only part of the flightplan filled in was FRWAY5 for the STAR and the below approaches. The approach that had fixes under "VIA", ILS 10L: RNAV (GPS) Y 10L: And RNAV (RNP) Z 10L: This is the info from the KPBI.txt file. ILS 10L APPTR,I10L,10L,GULLO IF,GULLO,26.70071944,-80.47772500, ,0.0,0.0,0,0,0,0,0,0,0,0 CF,WILBA,26.69343889,-80.34763056,0,IPBI,278.8,14.6,100,7.00,2,3000,0,0,0,0,0,0 APPTR,I10L,10L,PBI IF,PBI,26.68005278,-80.08650556, ,0.0,0.0,0,0,0,0,0,0,0,0 TF,WILBA,26.69343889,-80.34763056,0, ,0.0,0.0,0,0.00,2,3000,0,0,0,0,0,0 HF,WILBA,26.69343889,-80.34763056,1, ,0.0,0.0,99,60.00,2,3000,0,0,0,0,0,0,1 FINAL,I10L,10L,I,3 IF,WILBA,26.69343889,-80.34763056,IPBI,278.8,14.6,2,3000,0,0,0,0,0,0 CF,ZISUR,26.68792500,-80.21750000,0,IPBI,278.8,7.7,99,7.00,1,2000,0,0,0,0,2,0 CF,RW10L,26.68305000,-80.10470000,0,IPBI,278.8,1.6,99,6.10,1,68,0,0,0,0,3,0 VA,0,99,2,1000,0,0,0,0,0,0 VI,2, ,0,240,0,0,0,0,0,0,0,0 CF,LANCH,26.51370278,-80.10469444,0,PBI,188.6,10.0,189,8.00,1,2000,0,0,0,0,0,0 HM,LANCH,26.51370278,-80.10469444,2, ,0.0,0.0,9,60.00,0,0,0,0,0,0,0,0,1 RNAV (GPS) Y 10L: APPTR,R10LY,10L,GULLO IF,GULLO,26.70071944,-80.47772500, ,0.0,0.0,0,0,0,0,0,0,0,0 TF,WILBA,26.69343889,-80.34763056,0, ,0.0,0.0,0,0.00,2,3000,0,0,0,0,0,0 APPTR,R10LY,10L,PBI IF,PBI,26.68005278,-80.08650556, ,0.0,0.0,0,0,0,0,0,0,0,0 TF,WILBA,26.69343889,-80.34763056,0, ,0.0,0.0,0,0.00,2,3000,0,0,0,0,0,1 HF,WILBA,26.69343889,-80.34763056,1, ,0.0,0.0,99,4.00,2,3000,0,0,0,0,0,0,0 FINAL,R10LY,10L,G,3 IF,WILBA,26.69343889,-80.34763056, ,0.0,0.0,2,3000,0,0,0,0,0,0 TF,ZISUR,26.68792500,-80.21750000,0, ,0.0,0.0,0,0.00,2,2000,0,0,0,0,2,0 TF,RW10L,26.68305000,-80.10470000,0, ,0.0,0.0,0,0.00,1,68,0,0,0,0,3,1 DF,JUTAS,26.67790278,-79.98664722,0, ,0.0,0.0,2,420,0,0,0,0,0,0 TF,ODKEY,26.52816389,-79.98001944,0, ,0.0,0.0,0,0.00,0,0,0,0,0,0,0,0 TF,LANCH,26.51370278,-80.10469444,0, ,0.0,0.0,0,0.00,1,2000,0,0,0,0,0,1 HM,LANCH,26.51370278,-80.10469444,2, ,0.0,0.0,9,4.00,0,0,0,0,0,0,0,0,0 RNAV (RNP) Z 10L: APPTR,R10LZ,10L,FRWAY IF,FRWAY,26.95223333,-79.98241944, ,0.0,0.0,1,5000,0,0,0,0,0,0 TF,ENDUW,26.88608056,-80.03938889,0, ,0.0,0.0,0,0.00,1,5000,0,0,0,0,0,0 TF,SANZZ,26.80653056,-80.10821944,0, ,0.0,0.0,0,0.00,1,4000,0,0,0,0,0,0 TF,SHDEE,26.78010278,-80.22755278,0, ,0.0,0.0,0,0.00,2,4000,0,1,180,0,0,0 RF,ZISUR,26.68792500,-80.21750000,1,UBMEF,99,2.8,2,2000,0,0,0,0,0,0 APPTR,R10LZ,10L,GULLO IF,GULLO,26.70071944,-80.47772500, ,0.0,0.0,1,5000,0,0,0,0,0,0 TF,WILBA,26.69343889,-80.34763056,0, ,0.0,0.0,0,0.00,2,3600,0,0,0,0,0,0 TF,ZISUR,26.68792500,-80.21750000,0, ,0.0,0.0,0,0.00,2,2000,0,0,0,0,0,0 FINAL,R10LZ,10L,G,2 IF,ZISUR,26.68792500,-80.21750000, ,0.0,0.0,2,2000,0,0,0,0,2,0 TF,RW10L,26.68305000,-80.10470000,0, ,0.0,0.0,0,0.00,1,68,0,0,0,0,3,1 TF,JUTAS,26.67790278,-79.98664722,0, ,0.0,0.0,0,0.00,2,520,0,0,0,0,0,0 RF,ODKEY,26.52816389,-79.98001944,2,UHCOJ,269,4.5,0,0,0,0,0,0,0,0 TF,LANCH,26.51370278,-80.10469444,0, ,0.0,0.0,0,0.00,1,2000,0,0,0,0,0,1 HM,LANCH,26.51370278,-80.10469444,2, ,0.0,0.0,9,4.00,0,0,0,0,0,0,0,0,0 I am not sure if I am doing anything wrong with the setup of the approach, but for the life of me I am unable to get the transitions for any approach that is not ILS. EDIT: I am able to see the IAFs for all the approaches with the NGX. Thanks for your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.