Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 With which User did you install the FS and/or AES, yours or your girlfriends account? Did your account has the same Windows rights (best is admin) as your girlfriends account? Normally there are some files "user-related" stored by the FS, but I don't think any AES file is related to user (non in AerosoftAES and not the scenery.cfg), but maybe you account is not allowed to access all data. Maybe you can check that in the windows usermanagement. brgds Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 With which User did you install the FS and/or AES, yours or your girlfriends account? Did your account has the same Windows rights (best is admin) as your girlfriends account? Normally there are some files "user-related" stored by the FS, but I don't think any AES file is related to user (non in AerosoftAES and not the scenery.cfg), but maybe you account is not allowed to access all data. Maybe you can check that in the windows usermanagement. brgds Oliver Pabst I installed FS/AES when i was logged in but we are both administrators. But i don´t think that is the problem because both FS/AES work before. I recently installed FS update 9.1,do you think that could be the problem? Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 I don't think that the FS9.1 has to do with it, because when you logged in with you girlfriends account, you say all is fine. Maybe you can try to run the AES installer once again, when you are logged in, without deleting anything before. brgds Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 I don't think that the FS9.1 has to do with it, because when you logged in with you girlfriends account, you say all is fine. Maybe you can try to run the AES installer once again, when you are logged in, without deleting anything before. brgds Oliver Pabst I tryed that with the same result as before. Another thing is that when i have AES installed the jetbridges are missing on Budapest and Frankfurt airports and when i delete AES the are back. This is what it lookes like when starting FS. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 But that is exact the error, I have corrected in the scenery.cfg. Go to the Scenery Library when the FS is started. Search in the list for the Entry called AIRPORT (that one has this wrong entry) and detete that entry. Stop the FS and Start it again. If you then don't have this error, run the AES installer again. If all is fine and no error comes up, uncheck all airports in AEShelp, Save, And check all your airports again. Then all should be ok. brgds Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 I tryed that with the same result as before. Another thing is that when i have AES installed the jetbridges are missing on Budapest and Frankfurt airports and when i delete AES the are back. This is what it lookes like when starting FS. Now i have done exactly as you said but the result is still the same. I have installed the new scenry.cfg and i have deleted the AIRPORT file from scenery library in FS,i have installed AES again and unchecked and checked the airports again but AES don´t connect to FS. And shouldn´t the file AIRPORT in scenery library come back after installation? Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 Ok, is the message in the red window gone, when you go to a AES Airport? Is only the connecting missing, or does AES itself don't work at the airports. brgds Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 Ok, is the message in the red window gone, when you go to a AES Airport? Is only the connecting missing, or does AES itself don't work at the airports. brgds Oliver Pabst The red window is still there and AES doesn´t work at all.It can´t connect. And the jetbridges are still missing. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 I am going to the end of my ideas. Can you please mal the following search in a CMD window, based on the FSMain-Directory: dir AES_*.BGL /S if the files in the result list are NOT only below <FSMAIN>AerosoftAESSCENERY give me the feedback, where they are. if all are there below, make a ZIP file, which contains the following files: AES_*.BGL from ..AerosoftAESScenery and AES_*.DAT from ..AerosoftAES and send it to support@aerosoft.com with the titel: "[AES] Forward to Oliver Pabst please" DONT POST it HERE!! brdgs Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 I am going to the end of my ideas. Can you please mal the following search in a CMD window, based on the FSMain-Directory: dir AES_*.BGL /S if the files in the result list are NOT only below <FSMAIN>AerosoftAESSCENERY give me the feedback, where they are. if all are there below, make a ZIP file, which contains the following files: AES_*.BGL from ..AerosoftAESScenery and Ok,thanks for your help and patience.I hope we can find a solution soon. It´s a very nice product,i hope there will be more vihicles in the next update,maybe a fueltruck or deicingtrucks. Keep up the good work and thanks again. AES_*.DAT from ..AerosoftAES and send it to support@aerosoft.com with the titel: "[AES] Forward to Oliver Pabst please" DONT POST it HERE!! brdgs Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 I am going to the end of my ideas. Can you please mal the following search in a CMD window, based on the FSMain-Directory: dir AES_*.BGL /S if the files in the result list are NOT only below <FSMAIN>AerosoftAESSCENERY give me the feedback, where they are. if all are there below, make a ZIP file, which contains the following files: AES_*.BGL from ..AerosoftAESScenery and AES_*.DAT from ..AerosoftAES and send it to support@aerosoft.com with the titel: "[AES] Forward to Oliver Pabst please" DONT POST it HERE!! brdgs Oliver Pabst Should i really search for dirAES_*.BGL/S or is the* standing for something? Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 25, 2007 Developer Share Posted April 25, 2007 Enter dir AES_*.BGL /S brgds Oliver Pabst Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 25, 2007 Author Share Posted April 25, 2007 Enter dir AES_*.BGL /S brgds Oliver Pabst When i seek for that file it can´t be found anywhere at all. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 25, 2007 Share Posted April 25, 2007 Bjorn, are you swedish? in that case, I can help you in our mother tounge, just add me or Pm me.. Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 26, 2007 Author Share Posted April 26, 2007 Bjorn, are you swedish? in that case, I can help you in our mother tounge, just add me or Pm me.. Hej det stämmer det.Du får jätte gärna hjälpa till om du kan. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 26, 2007 Share Posted April 26, 2007 Tjena Björn, Skulle i ditt fall ta bort hela AES installationen och installera 1.50 versionen. Det har blivit nåt knas när den ska skriva in var AES finns i Scenery.cfg och därav felmeddelanden när du startar upp för den hittar inte filerna, tror det löser sig av sig själv Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 26, 2007 Author Share Posted April 26, 2007 Tjena Björn, Skulle i ditt fall ta bort hela AES installationen och installera 1.50 versionen. Det har blivit nåt knas när den ska skriva in var AES finns i Scenery.cfg och därav felmeddelanden när du startar upp för den hittar inte filerna, tror det löser sig av sig själv Tjena,det är precis vad jag har gjort ett antal gånger men det blir samma fel ändå.Tydligen låg det inte rätt i min .cfg fil men det fick jag hjälp med så det har löst sig,åtminstånde tillfälligt för den .cfg filen som jag fick tillbaka har en förmåga att försvinna och den gamla kommer då tillbaka,skitskumt.vet inte om jag gör rätt men jag tror att jag gör det. Men varför försvinner mina gater på Budapest och Frankfurt när jag har installerat AES 1.50?Tar jag bort AES så kommer gaterna tillbaka. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 27, 2007 Share Posted April 27, 2007 Kolla oxå så att du inte har .bgl filer i dubbelversion, D:FS2004AerosoftAESAIRPORTEDDF_2005 där finns dom och titta om du har samma datum på de filerna som ligger i din scenery katalog, kopiera över den nya i så fall eddf_fs9_gmax_objects_LIB-AES.bgl Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 27, 2007 Author Share Posted April 27, 2007 ah.. Vet inte om du använder katalogerna rätt men som jag gjort är att kopiera .bgl filerna från AES/SCENERY/EDDF_2005, Budapest_2007 till katalogen där du dina originalfiler och skriv över, då kommer gaterna att fungera Godmorgon,ursäkta en dum fråga men vart ligger orginalfilerna? En annan konstig sak är den att när jag loggar in på tjejens sida och öppnar FS så fungerar det och i mappen FS/Aerosoft/AES så ligger filerna/mapparna i en ordning med AIRPORT överst och ViMaCli.dll sist men på min sida så är det tvärtom. Och när jag har avinstallerat AES så går det inte att ta bort två filer,ViMaCli.dll och AESHelp. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 27, 2007 Share Posted April 27, 2007 Du kan ju klicka på namnlisten i utforskaren, så vänder du allt men det spelar ingen roll hur dom ligger, bara dom är där. Det är bara i scenery.cfg du måste ha viss ordning för prioriteringens skull. Originalfilerna som jag kallade om är själva sceneryt för EDDF. Tror FS/Aerosoft/EDDF är standard och i scenery katalogen ligger själva bgl.filerna Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 28, 2007 Author Share Posted April 28, 2007 Du kan ju klicka på namnlisten i utforskaren, så vänder du allt men det spelar ingen roll hur dom ligger, bara dom är där. Det är bara i scenery.cfg du måste ha viss ordning för prioriteringens skull. Originalfilerna som jag kallade om är själva sceneryt för EDDF. Tror FS/Aerosoft/EDDF är standard och i scenery katalogen ligger själva bgl.filerna Tjenare,tack för alla tipsen. Var innne på Avsim´s forum och läste och fick tipset att högerklicka på fs9 ikonen och kör spelet som administratör och då fungerade allt på en gång.Det konstga är att jag redan är administratör. Men som sagt nu funkar det. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 28, 2007 Share Posted April 28, 2007 aha, så bra.. Du kan ju ha lagt in spelet under ett annat konto och sen därefter skapat dig som Admin.. Hade inte hört talas om det innan men mitt funkar ju Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 28, 2007 Author Share Posted April 28, 2007 aha, så bra.. Du kan ju ha lagt in spelet under ett annat konto och sen därefter skapat dig som Admin.. Hade inte hört talas om det innan men mitt funkar ju Mitt fungerade förut också precis som det ska men sen hände nånting,vad vet jag inte.Jag installerade spelet när jag var inloggad som admin,så jag vet inte vad som har hänt. Men nu funkar det,men vore kul att veta vad det var för något. Björne Vart bor du nånstans?Själv bor jag i Stockholm. Link to comment Share on other sites More sharing options...
Magnus 0 Posted April 29, 2007 Share Posted April 29, 2007 Ja, man vill ju alltid kolla varför så att det inte händer igen. Jag bor i Borås, eller egentligen utanför men närmaste stad. Kika på sidan www.skye.dk Link to comment Share on other sites More sharing options...
Bjorn 0 Posted April 30, 2007 Author Share Posted April 30, 2007 Should i really search for dirAES_*.BGL/S or is the* standing for something? Hi,again.I think i have solved the problem.When i right click on the fs9 icon and press play as administrator it works perfectly.But i don´t know why because i have been a admin. all the time,strange. If you have an ide´how this could happens you´re welcome to let me know.Thank´s for your patience with my problem. Keep up the good work. Björn Link to comment Share on other sites More sharing options...
Recommended Posts