Bobben
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Bobben
-
-
Anyone any ideas on this i have reinstalled the scenary today with the same results, is it a isolated issue? or is there a problem with this airport?, i have never experianced problems with aerosofts products before hence why i have never needed to use these forums but i have always bought boxed versions and i will continue to do that i think as my first downloaded product seams to be broken and from the lack of response i get the feeling im alone in this issue
Thanks for all the assistance
Chris
Hi!
You are not alone. I reported the same issue in this forum in may, but there seems to be no solution to this problem yet. FSX complains about missning textures (with that option on) when loading an aircraft at or close to this airport.
/Bjorn
-
I have now tried setting the trim with the default (fsx) keys from the keyboard, num1 and num7, but the behaviur is the same. I tried with different intervalls between the keypresses, but even with quite long delays between each keypress, it acts the same. The behaviour seems almost random at times.
Its not a big issue, just a little annoying when you trying to do small adjustments on the approach. Perhaps it has something do to with FSUIPC, SP2 will tell.
/Bjorn
-
If you disabled trim altogether then what it most likely happening then is that I can't catch the trim event at all and thus my whole logic behind controlling the trim goes crazy as it is based on "normal" FSX behavior. Is it possible for you to have a separate FSUIPC setting that doesn't disable the FSX trim ?
Björn
I think you have missunderstood what i wrote. I have not disable trim all together at all, the trim event is still there for you to catch. The only difference is that i let FSUIPC manage all key and axis configuration, simply because it does a much better job doing that, then the built-in configurator in FSX itself. You can read all about it in your documentation of FSUIPC (placed in the fsx/modules folder). When i press my TrimUP and TrimDOWN buttons on my yoke, FSUIPC injects/sends the corresponing events: ELEV_TRIM_DN (65607) or ELEV_TRIM_UP (65615) in to FSX.
Could it be that your special trimfunction, with what ever calculations it makes, are somewhat slower to react/execute/finish to those messages, and therefore more easely get kind of "flooded"?
/Bjorn
-
I have FSUIPC 4.60 (registered) installed, and i manage all my buttons, switches and axis control trough FSUIPC. All controls are disabled in FSX itself. I'm aware of the possible "lag" when holding the trim button down in repeating mode, but that is not the issue here. Even if a disable the "repeting mode" for that button(s) in FSUIPC, ie it only registers just "one click" per press , it still "runs away". No other of my aircrafts shows this behaviur.
/Bjorn
-
Hello!
Just wondering, is the pitch trim supposed to be operated in a special way on this aircraft?
For me it sometimes seems to live a life on it's own. With one click on the trimbutton on my saitek yoke, it often just moves "one click", as on most of my other aircrafts, but at other times, it just kind of "keeps going" and make a rather large adjustment. There is nothing in the manuals about this, but in the description of the aircraft at aerosoft, there is a (for me at last) little bit cryptic statement: "Realistic pitch trim simulation: You can actually trim the aircraft to fly the attitude you want, not the attitude FSX "thinks" you want...".
/Bjorn
-
I've experienced those crashs too and came across the use of "Norway Scenic" together with Vaernes (which is mentioned in the manual). Sadly, the link in the Vaernes manual doesn't point to a current location for a patch and I investigated further, switching Norway Scenic off - no change here.
I think I already used the most current version of it (V2) and therefore there is no problem in the usage together with Vaernes. The cause for the crashes must be another.
I came across the .bgl files of the FSX itself and the one from My Traffic 2010 (just search for a .bgl containing "enva" and you'll see). I disabled them both and finally got crash free at Vaernes.
So please try to find those maybe competing files and rename them to .off instead of .bgl and see what happens.
I can find only one bgl file containing "enva" outside of the aerosoft folder itself. The filename "VaernesX ENVA.bgl" makes it look like a aerosoftfile rather than a FSX default one?
/Bjorn
-
Don't know if this has anything to do with it, but when i turn on missing textures warning in FSX, it reported the following when loading ENVA:
Scenery library objects not found:
GUID: 9C395CED-66DC-497B-99B9-3DF20A0B4766
C3A5D216-094F-E38B-BBD6-44BE08FCBA07
G1F29AF4-C7C3-41C2-960E-31E2C6F7FC96
2EA549C8-E776-4390-BADC-92E9A24DCFC6
0C9F2BCF-5064-483E-A5DE-A8AB96024650
B485B80E-3A93-4F29-829D-D7C4A1153C4A
05A8AE04-2618-4613-9B29-FA5B93108D48
3E56FCAF-939B-458A-B401-889AD9E420A8
A6E4875B-2465-4749-9503-9A7E58DA7A78
FA0CD807-03CB-47A2-BF3D-5ACA76328E2B
766ACD53-76B8-4372-BC66-9207A563D145
782A9462-524C-43F1-A653-455C7220192C
01F76C71-0207-4318-B352-92738111959F
Fail to load texture: DEFAULT.BMP
/Bjorn
-
Hello Folks,
I see your both running 64Bit systems.
Is FSX installed to the default location on the C:Drive.
Hello!
I have the FSX installation on it's own drive, and i have that very annoying UAC disabled.
/Bjorn Boman
-
Hello Bjorn,
Is this with the same aircraft if so please try a default aircraft, also try flying the same flight at night say around midnight.
Hello!
This happens with all my aircrafts, including the default ones, no matter what time of the day (or night) i fly. Because of my workhours, i actually do most of my flying at midnight, or close to it. This also happens when i try to start/load my flight at Vaernes, FSX freezes and crash after the "loading textures" dialog reaches 1-5 %.
I just replaced my Nvidia GTX 285 graphic card with a GTX 480 and at the same time uppgraded from Vista 64 to Win7 64. I have made a complete reinstall of my computer now, including FSX and all addons, with the exception of "My Traffic X" (wanted to try without it), but the problem remains.
/Bjorn Boman
-
Had the same problem, when flying first in this area with a complex aircraft. Solution was to add the entry "HIGHMEMFIX=1" to the Graphics section of the fsx.cfg
More on this see here: http://www.forum.aer...showtopic=33964 or on the avsim forum searching for "HIHGMEMFIX"
Otto
I have followed those threads myself and are using the memfix now, it has fixed many of the textureproblems i experienced in FSX under Vista, but sadly it did'nt help me with this issue. But thank you for the tip :-)
/Bjorn
-
Hello!
Almost 9 out of 10 of my approaches to Trondheim, results in a appcrash of FSX when getting close to the airport, usually when i am just a couple of hundred feet from touchdown. Everything runs very smoothly until it just complety freezes, and i have to Cntr-Alt-Del me out of it. I have "Mesh resolution at 10m and "Mesh complexity" at 100, as instructed in the manual. I also tried to lower all my display settings in FSX and even reinstalled the airport a couple of times, but the problem still remains.
I haven't experienced this with any other of my airports from Aerosoft, even though the FPS can drop a bit at some of them, like LFMN.
Any ideas?
/Bjorn
-
Hi Bjorn,
Can you please check that you have set-up the INS to fly from waypoint 0 to waypoint 1 ?
Björn
That fixed the problem, it was displaying "1" not "01", as it should.
thanks
/Bjorn
-
Hello!
I can't make the INS system to work properly, because the HSI needle newer seems to show the correct course to the inserted waypoint.
I have the aircraft parked on Rw35 at Flesland (ENBR) in Norway. I typ in the waypoint ROXET N61.35.25 E007.16.65 to the northwest of the airport, in to the INS as no 1, and the navigationswitch is set to GPS. The needle moves, but now points south. The Distance and other data in the HSi is also wrong. If i then type in other N and E values in the INS, the needle never move again, it just keeps pointing in the same direction.
I don't know what im doing wrong here. I have FSCUIP 4.60 installed.
/Bjorn
Tronheim Crash
in Aerosoft Scenery
Posted
Hi Shaun and Chris!
Since i installed Win7 (64) on my computer, it's been impossible to load this airport at all. The loading screen always freeze at precise 80 % - "loading auto-generated objects". I discovered that if i disable/remove the file " ENVA_Buildings.BGL from the VaernesX_D folder, everything works just fine (altough it looks a little bit weird). Perhaps Chris could try that to, at least we'll se if our problem is originating from the same source?
/Bjorn