-
Posts
700 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Downloads
Posts posted by Pavel1971
-
-
The work on the Bratislava Castle has been completed for the project "Bratislava Helicopter Grounds. Another helicopter landing site has also been completed.
At this stage, I will focus on work on the remaining sites for helicopter located in Bratislava.
-
Everything works on my computer, I can choose when drawing up a flight plan SID for departure and STAR for arrival.
In the screenshot, I chose runway 04 SID NIT1Z when departing from Bratislava.Please check, when you make a flight plan, do you choose IFR flight in the menu?
After the above remark in December, I immediately made changes and sent it to the publisher.
As far as I understand V1.0.1, this is an updated version.
In any case, I'll clarify. More precisely, I can't tell you, since I have all the flight plan data displayed on my computer and I can select SID and STAR. -
Good afternoon
Please check if you have the version update installed
v1.0.1.
It shows all SID, STAR for me.For information, I plan to finish work on the Bratislava helipads at the end of May and will do another update for the airport, which will include the addition of helicopter launches on the territory of the airport and several city buildings near runway 04. Perhaps more small points will be corrected.
- 1
-
Bratislava Castle and the Parliament of Slovakia, which will be included in the Bratislava heliport project. Bratislava is a compact city that combines historical architecture with modern buildings. Bratislava Castle is located next to the heliport in River Park.
The work on the castle is completed, it remains to make textures for Parlmaent and in a few days I will show this complex in MFS. -
1 hour ago, Mathijs Kok said:
We had to do a livery without any airline, so now we have one more. Our own private A330.
Looks great!
This is Aerosoft's calling card!I enjoy flying the CRJ 550/700 and I think the A330 will also be my favorite aircraft!
Thank you!- 2
-
Work on the project "Helipads of Bratislava" continues.
You can see the progress in the screenshots.
- 1
-
The Bratislava Helipads project for MFS has been created and is already in the simulator.It will be possible to boot on the helipads from the simulator menu by typing the created ICAO code and then select the desired helipad from the list.Three helipads will be on the roofs of the River Park Hotel, the National Bank of Slovakia and the hospital. Three helipads will be located on the ground.On the screenshots of River Park Work continues on the project!
- 1
-
Cowansim Bell206 XP12. I'm impressed with XP12
-
It took me a little more time to complete the work on this complex. It remains to make a LODs for it, draw PBR textures and the first helipad after a while I will show in MFS.
Before the SNP bridge, including the bridge itself, the Bratislava Castle and the Parliament, 3D buildings in the project will be made in detail. -
Thanks Andrej!
I made Brno, the release was a few months ago. About my plans for the 23rd year, I wrote a little higher.
Mathijs - thanks for the feedback!
-
While I'm looking at X-Plane12, there are moments that made me very happy.
Good default airports. At least the default airports look better than I've seen before in various simulations.
I liked the graphics, I was impressed by the dynamic trees. The aerodynamics of the aircraft also pleased. Helicopter flights are the best.
I was also impressed with the sliding effect with low grip on the runway in rain and snow. One of the things that I would like to improve is the textures of the ground. This flaw in my opinion is striking and perhaps ORBX will make a global texture pack for XP12. At least I would like to!
I like XP12
Screenshots of FlyJSim Q4XP in EVLA, EVRA and PAKT as well as CowanSim-Bell206L in KORS. All airports are defaulted. -
Best wishes for the Christmas Holiday!2022 is coming to an end and a new year is ahead of us with new opportunities and challenges.About my plans for 2023!In early January, an update to the Bratislava MFS airport will be released. An update already made in the first nearest update window will be available.The new project I'm working on is called Heliports of Bratislava.The project will include 11 helipads located in Bratislava. There will also be made a number of historical buildings of the city and its modern part.The base helipad will be located in the River Park of Bratislava.Also, work is underway on a small airport located 20 km from Bratislava, this is the Dubova LZDV airport.Both projects are created for MFS. Heliports of Bratislava and Dubova airfield I plan to release in the first quarter of 2023.In parallel, work continues on a major update of the Bratislava P3DV5 project.Next, apparently I will work on the Karlovy Vary airport for MFS and P3DV5.Merry Christmas and Peaceful skies everyone!Take care of yourself!In the screenshots, work on the River Park in Bratislava
- 1
- 1
-
3 hours ago, Sualk1712 said:
Entschuldigung. Da hab ich mich wohl falsch ausgedrückt. Ich meinte bei der Flugplanung в der Worldmap kann ich keine Landebahn auswählen......
This shortcoming has been corrected. Now it is possible to select Approaches in the simulator menu when performing IFR flights. All runways are present and operating ILS.
I will prepare an update literally tomorrow, but I will send it to Aerosoft after the Christmas holidays, which was the opportunity to prepare updates.
Excuse me again.
- 1
-
59 minutes ago, Sualk1712 said:
Entschuldigung. Da hab ich mich wohl falsch ausgedrückt. Ich meinte bei der Flugplanung in der Worldmap kann ich keine Landebahn auswählen.
In LittleNavMap werden komischerweise gar keine Prozeduren angezeigt (gleiche Datenbank von MSFS).
Das einzige Addon in der Nähe ist LOWW.
Yes, I understand you.
I didn't pay attention to it.
I never make flight plans in the MFS menu.
I will edit the configuration file and write in it the ILS, VOR / DME, NDB frequencies. After editing, it will be possible to create a flight plan from the simulator menu.
In LittleNavMap, I can make a flight plan and in the simulator itself, all navigation aids in Bratislava work.I will look into this issue and I think that before the end of the winter holidays I will immediately prepare an update. It will be the beginning or middle of January.
Sorry for this oversight and thank you for buying Bratislava!- 1
-
17 hours ago, Sualk1712 said:
Ich kann im Simulator für den Flughafen kein ILS auswählen. Die Anflugprozeduren für 22 und 31 sind vorhanden. Gestern gekauft. Der Flughafen ist somit für mich nicht nutzbar. Wann ist hier mit einem Fix zu rechnen?
Good afternoon "Sualk1712".
I am the author of the Bratislava project, my name is Pavel. I was surprised by your post.
ILS to LZIB operates on both runways.
ILS RWY 31 - 110.70, ILS RWY 22 - 108.30I have attached some screenshots showing ILS running on runway 31 and runway 22 and have signed the screenshots.
You may have made some changes to the simulator database, although scenery takes precedence. Perhaps you have an additional Bratislava add-on installed, or a region of Slovakia.
But I can assure you that ILS works in my project, the frequencies are correct, and when landing on ILS, planes enter strictly in the center of the runway. -
Not even bad at all.
I'm sure you guessed it. XP12 screenshots from X-WORLD for X-Plane 12 and Ortho sceneries for the northern United States and Kosice Sowansim H125 helicopter model
-
-
2 hours ago, rado said:
Thank you Pavel :-),
looking forward to try it today evening after coming back from work
Rado
Ahoj Rado!
I'm interested in your opinion. In general, I think that it turned out well. But if you have any comments or suggestions, write, I will make notes for myself and take into account when I prepare an update, after some time.
- 1
-
Today was the release of Bratislava airport for MFS, my second project for this simulator.
What has been done in the project, you can read in more detail on the Aerosoft website.
On my own behalf, I would like to thank the Aerosoft staff for preparing the release, the testers who helped me make the project better.
Thank you!- 2
-
There has been no news from me for a long time, therefore, I will tell you a little about current events.
The Bratislava MFS release will hopefully be before the end of this month. There is a preliminary release date, but we will open it just before the release.
As for Bratislava P3D. For Bratislava P3D edited almost all the buildings at the airport. LODs are made for all 3D objects.
Now I'm doing the city of Bratislava for MFS. In parallel, changes will be made to the city for P3D. Updates for P3D, I plan to release in 23. More specifically about the timing, I can not say anything.
This is my short news. We are waiting for the release of Bratislava MFS- 2
-
While Bratislava MFSis being tested, I decided to make a small airport near Bratislava. Airport Dubova LZDV.About two years ago, my friend from Slovakia asked me to make this airport, I think it will be a surprise for him
There is little work left, a few touches
- 2
-
I am in the final stages of working on the Bratislava MFS project and plan to send the project to the publisher in a few days.
While you can see the screenshots- 1
-
Еще несколько зданий в аэропорту Братиславы
-
The work done over the past period can be seen in the screenshots.
What's left to do. I'm on my way to the terminal. Fencing will be done at the end of the project. More dirt will be added to the hard surface, lighting for the masts, there are still a number of small nuances that need to be done.
Regarding the completion of the project, I am practically going according to my plan and hope to complete the work at the end of October. The mistakes that I made in the Brno project have already been taken into account in Bratislava. As I said, after the release of Bratislava, I will prepare another update for Brno.
Aerosoft Aircraft - A330 Preview
in Product Previews
Posted
My question is more about the actual use of the A330 than the model.
Isn't fuel dumping a mandatory option in aircraft design? After all, fuel collection is used in case of failures, when a forced landing is provided and there is a need to dump fuel.
In this case, the desire of the airline goes by the wayside
The second part of the question. If there is an A330 in which fuel dumping is not provided, what were the designers guided by when lining up the aircraft without fuel dumping, namely reliability, etc.?