Jump to content

walt642

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by walt642

  1. (Altitude) While turning the altitude knob on the Bravo quadrant, the altitude is not changing the altitude in the PFD display. (NAV and HDG) I load a flight plan in the CDU. Take off and gain altitude, set Auto Pilot on, select NAV, and the NAV turns off and goes to HDG. I turn HDG off again, go back to NAV and it goes back to HDG. NAV mode is set to FMS1. Seems like the Honeycomb Quadrant is not in sink with the glare shield panel. Also there always has been problems with the CDU and entering flight plans. I enter a flight plan with SIDs and Stars and end up with waypoints missing or in the wrong location. With the NEW MFSF CRJ, if I make a mistake entering, I try to CLR it and nothing happens. If I try and use DELETE again nothing, BUT what is happening is that the DELETE shows in the scratch pad, and It stays there. Then I can't clear the scratch pad because DELETE is always there. If I try and enter new data, it shows up after the DELETE. ie DELETE KIAD. Any help would be appreciated. Thank You
  2. Fixed. Forgot to run P3Dv5 as administrator. That resolved the problem error. Thanks see you guy's at FL 330. Have a great day.
  3. Reinstalled A3XX getting "Error: ND log file could not be generated." c:\Program files\Lockheed Martin\Prepar3dv5\Aerosoft A320-321 Prov5\Data\AB_ND_GDI.log " Does anyone know how I can correct this problem? Thank You..... Walt
  4. Just had to reload the A319/A320 Professional and am getting the following message. "Error:ND Log File could not be generated. C:\Program Files\Lockheed Martin\Prepar3Dv5\Aerosoft A320-321 Pro v5\Data\AB_ND_GDI.log" Any way to fix this without reloading the Airbus again? Thank You." Walt
  5. Thank you fellow pilots. Will try the simbreif and thank you. Walt
  6. Good morning. I am going crazy trying to find out how to get mu CDU to see a company route. I create a flight plan with navigraph charts. I export it to E:flight plans, I also saved the flight plan to C:\Users\My name\Documents\Aerosoft\General\A3XX flight plans, yet when I try to load the flight plan in the CDU company route, I get not in data base. Although it does put the KSFFCYVR (Example) in L1 and it turns blue. But when I go to flightplan there are no waypoints listed. What would be the exact location for me to save the flightplans so the CDU will see them. Also, say for example, the flightplan saved shows KSFFCYVR.pln should it be showing KSFFCYVR.rte or is pln ok? I think I just have to get the right location to save the company routes. "Happy Flying and thanks for any help." Walt
  7. Had Daytona along time ago. Is this airport available for Prepar3Dv5? Saw v2.5 but not sure if it will work with V5? Thank You Walt ("Happy Flying")
  8. My P3Dv5 is located in E:\Lockheed Martin\Prepar3Dv5 if this helps. Thanks Walt
  9. Did a registry clean and trieI tried to reload and install the A319/320 Professional about 6 or 7 times, and still cant get this plane to load. This is the error I get. I have windows 10, using Prepar3Dv5. And this is the latest upgrade from PC Aviator. I love this plane just can't get it to install. Any help would be greatly appreciated. Thank you
  10. Not sure what the HF2 after v5 means
  11. Is there any way I can find out what and where the dll file is to fix this?
  12. As hard and as many times as I tried to install the Airbus, If I select the aircraft P3Dv5 refuses to start, it crashes right off the bat. Don't even get the scenery loading box. Frustrated as this addon was close to $70.00 US Dollars.
  13. P3Dv5 is 5.0.24.34874 and Airbus Pro 64Bit is V11.4.0.1
  14. Just tried to use the AS Updater and Malwarebyte blocked it saying there was a trojan. Regular as well as experimental updates are available for installation ASUpdater version info: An error occured! System.Xml.XmlException: 'doctype' is an unexpected token. The expected token is 'DOCTYPE'. Line 1, position 3. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) at System.Xml.XmlTextReaderImpl.ThrowUnexpectedToken(String expectedToken1, String expectedToken2) at System.Xml.XmlTextReaderImpl.ParseDoctypeDecl() at System.Xml.XmlTextReaderImpl.ParseDocumentContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.Load(String filename) at ASUpdaterLib.CUpdaterInfo.GetAvailableVersion(String server) Prepar3D 5.x (5.0.24.34874) found: (E:\Lockheed Martin\Prepar3D v5\) Prepar3D 4.x (5.0.24.34874) found: (E:\Lockheed Martin\Prepar3D v5\) Alpha Flight Control Bridge Module: The server version file could not be loaded! http://update.aerosoft.com.dedi2593.your-server.de/asupdater/as_honeycomb_p3dv5/asupdater.xml System.Xml.XmlException: 'doctype' is an unexpected token. The expected token is 'DOCTYPE'. Line 1, position 3. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.Throw(String res, String[] args) at System.Xml.XmlTextReaderImpl.ThrowUnexpectedToken(String expectedToken1, String expectedToken2) at System.Xml.XmlTextReaderImpl.ParseDoctypeDecl() at System.Xml.XmlTextReaderImpl.ParseDocumentContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.Load(String filename) at ASUpdater.MainWindow.GetProductList() *** This product will be ignored! ***
  15. P3Dv5 version 5.0.24.34874 and Airbus Pro 319/318 and 320/321 version 1.4.0.1 Just installed it again and when I select the Airbus, P3Dv5 just crashes and will bit start. Kicks you right out. Appreciate you trying to help me by the way. Thank you.
  16. Uninstalled the A319/320 Professional and reinstalled with the newest update. I installed this about 5 times already and when I try and start P3dv5 with the Airbus, P3dV5 crashes before it even starts. P3Dv5 doesn't even start to load scenery it just kicks out. This only does it when I select the Airbus. So I uninstalled it again because it will not work. Any help on this? Thank You, Walt
  17. FSC10 I think is not compatable, but I think FSC9.7 is. I'll have to try that. I know it was working with my Prepar3dv4 until I tried to reload FSC. Thanks I'll keep working on it. Happy Easter Walt
  18. Using prepar3dv4... Reinstalling FSC10. Application is AS_FSC10_FSX-FS9 Getting message "Couldn't locate on installed version of FS2004 or FSX on this target system. Please install the FS2004 or FSX first before running this installation" I no longer have FSX on my machine. I only have P3Dv4 on my computer. I redownloaded the FSC9 from PC Aviator and ran the file which stated that it was for P3dV4 too. But as soon as I do to designate the airport files the installation stops and I get that message. How do I get FSC10 to install with P3Dv4. Thanks Walt and also "Happy Easter" to everyone.
  19. Again, Thanks Dave. I did notice that I was able to raise the flaps on all aircraft, and turn lights on and off just from my cockpit. When you say we have to have different aircraft models, do you mean CRJ 700/ 800/ 900, totally different make such as I would have a CRJ, the next gut say an airbus, and third say a 737
  20. Dave, thank you, we never realized that. So if I am all set up "Say I am in cruise mode" and every thing is looking good, then all my altitude starts to change or say my speed changes erratically, could this be because the other aircraft I am flying with changed something in their cockpit and is changing the settings in my cockpit? I really appreciate the quick comeback from you and also your help. Walt
  21. Flying Multiplayer (Three of us) using JoinFS. We connect and all of our three aircraft are showing up at the airport. What we noticed is that when we are parked next to each other, If I open my doors as an example, the other two aircrafts doors open. If I set my flaps, the other two aircraft flaps move. So what is happening is that what I do to my plane, happens in the other two aircraft. While flying together, some strange things happen, speeds, altitude etc change my without changing anything in my cockpit. Is this because of what I mentioned earlier, and not sure if my changes in my aircraft should be changing the other aircraft I am flying with. Hope we can get some feedback on this, and if there is a solution, we would certainly appreciate it. Thanks Walt (Also wishing everyone a Merry Christmas)
  22. Emanuel, You helped me last time and I'm hoping you can help me again. My cousin, brother and I fly multiplayer. They log on to my machine as the server. We have been flying the Aerosoft Airbus.  My brother connects with the airbus and joins with no problem, but for my cousin....... Here's what happens. My cousin "logs on to my server and connects."  Then "he selects an Airbus and it loads". Now the problem starts,  as soon as he clicks on "Join Session" his computer locks up and freezes. "This only happens when he selects an Aerosoft Airbus."  All the other aircraft he loads connect and he joins with out a problem. Pulling my hair out trying to solve tis mystery as all three of us love the Airbus. Thanks Walt

×
×
  • Create New...