Laminar(default) A330-300 & X-Works A330-200/A330-900 NEO | Honeycomb Bravo profile | X-Plane 12

I have created a Bravo profile for the Laminar(default) A330-300 and for the X-Works A330-200 and A330-900 NEO. Laminar exposes quite a few A330-specific datarefs and I tried to use them to the greatest extent possible. All lights are working except VACUUM and DOORS in the annunciator. I will add the DOORS light in the future. The A330 is available only in X-Plane 12 so this is not compatible with any A330 in X-Plane 11.

• Autopilot/Glareshield buttons
  • HDG --> Pull heading knob
  • NAV --> Push heading knob
  • APPR --> Push APPR button
  • REV --> Push LOC button
  • ALT --> Push altitude knob
  • VS --> Pull vertical speed knob
  • IAS --> Pull altitude knob
  • AUTOPILOT --> Engage AP1
• Left Knob
  • ALT --> Turns the altitude knob
  • VS --> Turns the pitch wheel
  • HDG --> Turns the heading knob
  • CRS --> Turns the CPT Baro knob
  • IAS --> Turns the speed knob
• Right Knob
  • INCR --> Increase the selected knob
  • DECR --> Decrease the selected knob
• Landing Gear Lever/Lights
  • UP --> Gear lever up
  • DOWN --> Gear lever down
  • LEFT/RIGHT/NOSE lights --> Connected to the deployment ratio of the respective gear
• Utility switches (from left to right 1-7)
  1. RWY TURN OFF OFF <--> ON
  2. LAND OFF <--> ON
  3. NOSE OFF <--> T/O (jumps mid position)
  4. STROBE OFF <--> ON (jumps mid position)
  5. BCN OFF <--> ON
  6. SEAT BELTS OFF <--> ON
  7. Altitude knob scale 100 <--> 1000
• Annunciator lights
  • MASTER WARNING --> Connected to MASTER WARNING button
  • MASTER CAUTION --> Connected to MASTER CAUTION button
  • ENGINE FIRE --> Lights up if any of the engine/APU fire lights turn on
  • VACUUM --> No binding
  • LOW OIL PRESSURE --> Lights up when oil psi drops in any engine
  • LOW HYD PRESSURE --> Lights up when the psi drops in any of the 3 hydraulic lines
  • LOW FUEL PRESSURE --> Connected to default low fuel pressure indicators
  • AUX FUEL PUMP --> Lights up when any of the transfer pumps is working
  • ANTI ICE --> Lights up when wing or engine anti-ice is on
  • PARKING BRAKE --> Connected to the parking brake switch
  • STARTER ENGAGED --> Lights up when any of the starters is on
  • LOW VOLTS --> Lights up when the voltage is low in any of the battery voltage indicators
  • APU --> Lights up when APU is in starting/running/shutting down phase
  • DOOR --> No binding (WIP)
• FLAPS Lever
  • Push up --> Flaps up a notch
  • Push down --> Flaps down a notch

Installation

Make sure you have the latest version of HC Configurator before you use it. After that, open the configurator and go to Profiles -> Import Profiles -> Select Files and import the file you downloaded. Then, with the profile loaded in the configurator (check the blue line at the bottom) go once more to the Profiles menu and press Activate Current Profile. That's it, you are all set.

Support

In another profile I made some people have reported issues with importing it in the Configurator. If you have issues importing, loading, and using the profile feel free to leave a comment in this thread. Make sure to mention your operating system, Configurator version, aircraft version (for X-Works addons), and X-Plane version. I will be glad to help.