Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by mpo910

  1. Hallo Manu404, es kann sein das dein Shadertool "Envshade" die Bodentexturen, um die des Airports herum, farblich anpasst. Dies hat dann, wie du gesehen hast, zur Folge, dass diese anders aussehen als die des Airport EDDM. Shadertools sind in der Lage Helligkeiten und farbliche Anpassungen vorzunehmen. Dies ist vermutlich die Ursache für die farblichen Unterschiede. Ich habe kein Envshade und kann es deswegen nicht zu 100% belegen. Test wie folgt: Envshade Shader Nutzung in das Menu ausschalten. Shader Ordner P3D löschen (die in ".....user/appdate/local/lockheed Martin/Prepar3dVX). Prepar erstellt beim neustart automatisch einen neuen Ordner mit frisch kompilierte shader Starte einen Flug und schaue ob es nun besser ist. Ich hoffe meine Antwort hat dir geholfen. VG Marcus
  2. Honestly it is very simple. I would like to summarize lot´s of opinions in 2 short views. View one: Aerosoft as a supplier Sales count. P3D addons did count into this, till MSFS came. MSFS has more users = Aerosoft has more revenue. End of Story: Sell MSFS addon products. Much higher numbers=more revenue. Why not? View two: We customers at P3D Features we need count. P3D and P3D addons do still count into this. Also after MSFS came. We took time to find that out. We are back because MSFS does not fit into "simulating flights with complex aircrafts" and MSFS does not support my home build setup End of Story: Stay with P3D and its addons. Much higher fitting rates=more joy. Why not? ---------------------------------------------------------------------------------------------------------------------------------------------------- Very simple and the answer why, at this moment, "Aerosoft" and "some of us" are going different ways. This may change, as soon as MSFS delivers via the SDK what we like to use and see. When? Very open at the moment. That is what the customers decides and how MSFS/Asobo is reacting on this. IF MSFS consider "simulating complex aircraft" as a niche, then it will never ever happen in MSFS. To expensive, to less revenue. This probably lead already to the split market. MSFS and aftermarket attract VFR flyers in much higher sales numbers compared to those who like complex simulated aircraft. Why I think that? Evidence is already there. Scenery sells. SDK scenery parts got more updates compared to SDK complex aircraft (incl Porting existing parts). Less to no attention on that part from ASOBO (until present). Reaction addon devs Complex aircraft devs: PMDG, FSlabs, QW are announcing that P3D dev will continue now. Without harming MSFS because it could change in future. Scenery devs are focusing on MSFS. And Aerosoft his CRJ? It is NOT complex. At least not as complex as we like to have it IF it will be comparable with the actual system depth of all other Aerosoft planes Marcus
  3. Than why don't they work close with P3D LM too? Their products are sold as compatible and working close with LM is something other devs do too. I am also confused about the controversy statements or actings from Aerosoft. MSFS had 6 patches in 4 to 5 months. LM had 3. In that time.
  4. Is this problem solved in between? Because I own MSFS too and would like to get some airports for it, but I see there are obviously issues with Aerosoft products and MSFS. So I would wait so long till the issues are solved. A kind feedback from my side, about something I sometimes see here (and I mean in honestly: KIND feedback just to be keen of) 😉 If only one/or several out of thousends of users report an issue, does this really exclude that Aerosoft products have this issue? Or could it be that maybe just not enough users report them for other reasons? As they have enough else to fly to. Any feedback would be welcome! Thanks a lot! Marcus
  5. Thanks for your Reply @Mathijs Kok Isn´t that the case right now since HF1 on V5.1? When will that "settles" be? This means your A330 product is not compatible with P3D V5 at this moment and for uncertain time. Right? Is there a Timespan which you can communicate. Days, weeks or maybe months would be enough feedback for me? I do really understand this from your point of view. But hopefully you see also the users point of view. They are "hanging" in the air for an unknown timespan which surely does not lead to raising revenue. First of all: I like Aerosofts products and own many of them! Airports, planes etc. I hope you will support us further and update the products which are announced as "compatible" within a couple of days/weeks. I do like the fact LM does enhance the platform and SDK. I do also like the fact it is getting really good right now. But only if the 3.Party do follow and update their products too. Otherwise the platform P3D will be usable, but worthless and Aerosoft products are not usable and therefore also worthless. That would be a pity. @mopperle I did add them because most of the devs want to see what a User is using to get a 360° view for analyses purposes. Sometimes conflicts occur only between 3.Party products and not between 3.Party and P3D. So some devs ask for them and some do not like it. I can not know which of Aerosofts devs would like to see them and which won´t. So sorry for that. Regards, Marcus
  6. Hi at Aerosoft. The PBR textures don´t look right since P3D V5.X. Currently I am on P3D V5.1HF1. Dynamic reflections "off" does eliminate this glossy film. All other Dyn Reflect. settings (like Low, medium high or ultra) does not have any influence on this glossy film. This glossy film is also visible on the inside cockpit textures with PBR. Turning Exposure on/off or changing HDR sliders does also not have any effect. Is an update planned to make this plane compatible again? System specs Prepar3D_v5_Academic_5.1.12.26829 Edition Windows 10 Home Version 20H2 Installed on 20201023 OS Build 19042.630 Windows Feature Experience Pack 120.2212.31.0 Latest Nvidia Drivers i9 10900K @ 5.2 Ghz | HT OFF | 1.32V Mainboard ASUS ROG Maximus XII Formula Z490 32 GB RAM 3600 Mhz Corsair Vengeance | 4x8GB RTX 3090 24GB 32" Samsung UHD Monitor using 4k Custom Water Cooling | 2x 360MM | 1x 240MM Radiator HP Reverb v2 VR HMD | Steam VR Main Addons ASP3D | BETA FSRGW ChasePlane | Via ORBX FSReborn Prof. GSX 2 FSUIPC6 AIGAIM | Latest Version SODE | Latest Version MultiCrewExperience | Latest Version Aerosoft Airbus A330 | Latest Version Aerosoft Airbus A320/321 | Latest Version PMDG 747/748 | Latest Version QW787 | Latest Version FSLABS A320X | Latest Version FSLABS A321X | Latest Version Navigraph Charts ORBX Base ORBX LC ORBX TE NL ORBX TE NCA ORBX Regions ORBX HD Buildings ORBX HD Trees V1 & V2 REALTURB | All Continents +200 Addon Aiports | via .xml method added
  7. Thanks for posting. But we should leave it to the subject and also not make any assumptions here... Let´s ask Aerosoft to follow up and release patches as soon as possible. That would be great! 😉 Marcus
  8. Really appreciated it Mister Kok. And I would like to have it respectful here (to all the others posting here). 😉 A follow up would be great. Especially as the Lead Dev from LM, Mister Mc Carthy, has now stated it is not an issue anymore. Regards Marcus
  9. Hello Mister Kok, that isn´t the info LM stated on their own Support Forums as well which some well known Devs, who are Beta testers, given us. Here is the quote from Rob McCarthy from LM at one of the topics regarding this issue. He is also speaking of its "own" P3D simobjects as well of once from the other 3.Parties "Hi Peter, Yes, we will continue to fix content issues that exhibit this issue. Some default content has been fixed in 5.1 and we are planning to include more in the upcoming hotfix. We are also working directly with third parties to help narrow down how to fix specific content issues in their products. Regards, Rob McCarthy" And here is the Link to the topic at LM. It is the second post there: https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=140148 That would also mean, that ALL Addon airports have the same issues, which is not the case. Here is a quote from a well known Beta Tester in the scene: Rob Ainscough which he wrote to ORBX, who have the same issues. "Nick ... per Larry's testing, you need to set Z-Write alpha to False. If those objects are not PBR, it would be helpful to users if they were converted to PBR. LM's suggestions to help mitigate the issue: Flagging the placements to not batch if you are re-using the same transparent object across large areas. If the objects are close together with no other transparencies between them, this should be okay in most situations. Avoid using z write alpha flag, it hasn't been supported for some time. Use alpha to coverage / alpha testing instead of transparent blends where appropriate. If you are transparent blending a quad over the terrain, make sure it is flagged as a decal with the correct order. I realize that might be a lot of work for what could be $0 income. Cheers, Rob." A link to this post you will find here: https://orbxsystems.com/forum/topic/201443-prepar3d-v51/?do=findComment&comment=1720742 It would be nice if you would get in contact with LM and clarify this, if that is not done in between my first post and now. Because this is not a bug anymore, which we assumed during the phase P3D truesky was in Beta, it needs some changes on your end. But I would like to thank you again for this quick reply and hope we can sort this out. As in its current state it is a real immersion killer and that would be a pity for all of us. Also I am one of the customers who keeps buying your product, even though the times are somehow turbulent 😉 Regards Marcus
  10. Dear Aerosoft! Almost all of the Mega Airports and other Airports, which can be purchased via various Markets as well Aerosofts own marketplace, where "sold" as compatible with P3D V5. But due the new Lightning within P3D V5.X and the Enhanced Atmospherics Mode turned on, there are issues with almost all of the Airports. They have textures shining through clouds/fog and do not match/blend well with the new EA mode. As Aerosoft publishes scenery compatible with P3D V5.X, I would like to know when we can count with updates. Here are some Airports which have known issues EDDF Aerosoft EDDK Aerosoft EDDN 29Palms EETN Aerosoft ENGM Aerosoft ENVA Aerosoft FACT FSDG FIMP FSDG GCLA Aerosoft GCLP Aerosoft GOBD FSDG LEBL Aerosoft LEIB Aerosoft LEMD Aerosoft LEMG Aerosoft LEPA Aerosoft LGSM Aerosoft LSZH Aerosoft LTFE Aerosoft LXGB Aerosoft LM stated that the issue occurs due the fact they changed the SDK and therefore updates are required to "be compatible again". To reproduce the issue you may: - Fire up P3D V5.X - Location EDDF - EA Mode on - Take a plane - Go to the outside view or fly up to above a cloud/fog layer (setup via custom weather - and see how some simobjects textures blend through the clouds. A feedback would be welcome. Thanks a lot. Regards Marcus (EDDF)
  11. I can also confirm this. Today I flew ibn the A330 Lates build) from LSZH to MMUN and above Greenland suddenly out of nothing (I did not interact with any knobs) managed speed magenta triangle at PFD disappeared, therefore a new indicated managed speed, also in magenta at the PFD below the speedtape, showed 128 kts. My FMGC stated Managed is 0.81 MACH. I had to choose selected speed 270kts, otherwise the plane would loose to much speed. I played around with some settings (CI, Autothrottle, Thrustlevers different modes, etc). Nothing helped to get back in managed mode, at least the plane di not held it´s managed speed regarding the FMGC. In the FMGC I manually inserted for the next two waypoints 270/ (270 kts). Disengaged Autothrottle again, magenta triangle came back, and went back to managed speed (push speed button) and set the Thrustlevers back to CL and engaged autothrottle again. I can not recall the exactly order of this...but the thing which did help was inserting the 270/ at the FMGC for the next waypoints Managed speed is back again, and the indicated managed speed of 128kts, prior shown below the speedtape in magenta, disappeared also. So I am back in managed mode at the programmed 270 kts and the plane does hold this speed again. There must be something wrong and I do appreciate if Aerosoft will investigate in this issues which several users seem to have. It is not a very rare one.....it is a essential one because otherwise no one can trust the autopilot managed speed option for long haul flights. That would be a pitty. Can Aerosoft please confirm and investigate on this? Marcus System specs Prepar3D_v5_Academic_5.1.8.26742 Edition Windows 10 Home Version 2004 Installed on 20201025 OS Build 19042.572 Windows Feature Experience Pack 120.2212.31.0 Latest Nvidia Drivers i9 10900K @ 5.0 Ghz | HT OFF | 1.32V Mainboard ASUS ROG Maximus XII Formula Z490 32 GB RAM 3600 Mhz Corsair Vengeance | 4x8GB RTX Titan 24GB 32" Samsung UHD Monitor using 4k Custom Water Cooling | 2x 360MM | 1x 240MM Radiator HP Reverb v2 VR HMD | Steam VR Main Addons ASP3D | 7514 Open Beta - TEMP Uninstalled due Incopat. with P3D latest Version 5.1 FSRGW ChasePlane | Via ORBX FSReborn Prof. GSX 2 FSUIPC6 AIGAIM | Latest Version SODE | Latest Version MultiCrewExperience | Latest Version Aerosoft Airbus A330 | Latest Version Aerosoft Airbus A320/321 | Latest Version PMDG 747/748 | Latest Version QW787 | Latest Version FSLABS A320X | Latest Version FSLABS A321X | Latest Version Navigraph Charts ORBX Base ORBX LC ORBX TE NL ORBX TE NCA ORBX Regions ORBX HD Buildings ORBX HD Trees V1 & V2 REALTURB | All Continents +200 Addon Aiports | via .xml method added
  12. No. I already reinstalled ASP3D and controllated the path. All fine. Switching ea of in sim do the trick and then switch it on again. Nasty bug in my opinion
  13. Just uninstall and reinstall the client only.....that should be enough as the ea and shader files are client parts. No need to reinstall complete P3D. Are you using vr also?
  14. I have found another issue wich is related to EA mode of P3D V5. My FPS also gets slowly reduced over several hours of flying. If I get to lower FPS ranges, I have a workaround: I start my flight with EA Mode on (Checked) When FPS drops while in flight go to menu Untick EA Enhancement (set off) Go back to flight (just a second is ok) Go back to the menu to check EA mode (set on) FPS are completly back Normally I get around 30 FPS in VR on complex scenery. In the air about 35+. These 35+ start reducing slowly to somewhere between 15 and 20 FPS. After I unchecked and checked EA mode, they are back to normal. Strange is, they seem to stay stable than (I am still testing this due I am not sure about that one). Please report back if that helps. There is also one topic about that in the ASP3D forum at the P3DV5 Section. System specs Prepar3D_v5_Academic_5.0.24.34874 Edition Windows 10 Home Version 2004 Installed on 20200501 OS Build 19041.264 Experience Windows Feature Experience Pack 120.2202.130.0 Latest Nvidia Drivers i9 10900K @ 5.1 Ghz | HT ON | AffinityMask=90109 Mainboard ASUS ROG Maximus XII Formula Z490 32 GB RAM 3600 Mhz Corsair Vengeance | 4x8GB RTX Titan 24GB 32" Samsung UHD Monitor using 4k Custom Water Cooling | 2x 360MM | 1x 240MM Radiator HP Reverb v2 VR HMD | Steam VR Main Addons ASP3D | 7459 Open Beta ChasePlane | Via ORBX GSX 2 FSUIPC6 AIGAIM SODE | Latest Version MultiCrewExperience | Latest Version Airbus A330 | Latest Version PMDG 747/748 | Latest Version QW787 | Latest Version Navigraph Charts ORBX Base ORBX LC ORBX TE NL ORBX Regions ORBX HD Buildings ORBX HD Trees V1 & V2 REALTURB | All Continents +200 Addon Aiports | via .xml method added
  15. @Mathijs Kok @RobsonM Good Morning! I have some good news. The last file is working for me. I had no "bad" token requests since a couple of flights with each several hours of testing. Regarding my FPS drop it seemed to had another cause wich is NOT related to Aerosoft A330!. Therefore I would like to apologize taking your time to working on a solution without being "the cause". I found out that there where some issues with ASP3D (BETA), at least on my end! After 45 Minutes, wich equals the 3third "weather refresh" there where problems of injecting the weather. I just uinstalled ASP3D and reinstalled it, now the problem seem to be gone. I would like to thank you all being so patience with me. Now I can enjoy your A330 and looking forward to further enhancements on your products! I think you may close this ticket "as solved"! Regards, Marcus
  16. The previous file has still issues. Or better explained: Not the file has probably issues, but the behaviour is not gone. Strange is, that if starting P3D and a flight and being logged in, the log in the EFB says "Logged in" and Token refreshed "done". Thats ok. But if I lock out from the Aircraft cfg. tool, the EFB log keeps saying logged in and token refreshed "done" for the next couple of cycles (each 55 min). But how can it refresh it if I am NOT logged in anymore? I logged out previous. I wil test this file again. But today I flew and used the EFB with navigraph charts, and after 45 / 55 Minutes my FPS shrink again as already described before. Can it be "Navdatapro" related code? Or is there another "part" of the code using some cycles? Because when not using "any charts" and not being logged in via the Aircraft config tool there are NO issues and FPS stays stable. This is starting to get annoying. Install location and p3d root are on the same drive. The dcuments folder is on a different drive (where my OS is installed too). No antivirus used during installation AND also after that. I will report back! Thanks a lot till so far. Marcus
  17. @RobsonM Test done. First refresh after 55 Minutes was a succes. No FPS drop. Did you actually made a change to the code? Or are these the same as prior send to me only with LOG section? Note the Frames in the screenshots are with VR enabled. Can you provide me these files without the lower LOG Section please? I would like to implement them and not wanted to wait untill Aerosoft releases them "officially" because I am mainly flying VR and Charts a required in Cockpit therefore. That would be really nice! Thanks a lot Marcus
  18. I will test the file you send me. I am not using NavDataPro (3 TAB) at all. ON the first TAB I use also Navigraph. So First TAB Navigraph and Third TAB also Navigraph. I don´t have a subscription for NDP. I hope I understood you correctly. Is this answering your question? Thanks! Marcus
  19. @RobsonM 15:10 german time: Stopped P3D Overwrite to files in EFB Folder with "FIX" Logged in via A3xx config app Started the saved flight again 15:12 german time: Flight is running and 1 Chart from kneeboard is selected. 15:57 german time: FPS drops again every 30 seconds for the duration of 60 seconds. Fixes didn´t work for me 16:15 german time: I can refresh the EFB. No errors. Also the A3X config app still shows I am logged in. But the FPS drop is still there like I mentioned before. Manually login me out and refresh EFB, login me in again and refreshing EFB again, don´t gives me the FPS back. Still dropping and rising like mentioned before I asked myself if the EFB is really getting a Token refresh or not? And if yes, are all related "processes (reqeust tryings) aborted then? Note: Simlink still not activated. Does it require a activated simlink? Marcus
  20. I will try it right now. Give me some time. Because I will test and can see the "problem" / "solution" after 45 to 60 minutes and will report back. 15:13 German time: Test is started. Marcus
  21. @Mathijs Kok @RobsonM @RobsonMShort anser to your question: round about 45 to 60 minutes after loaded the flight with an A330 from aerosoft! Some interesting findings regarding this issue! Read carefully and precisly please. I did some tests and could further lead to a setup wich lead to my issue. My flight Setup normally, summarized: Starting Axx config app to log me in to navigraph charts and his browser via the "Login in browser" button Simlink is normally used! Version navigraph-simlink-win- BUT for this test below "deactivated" and NOT used! Start a flight at a gate (here LSZH) Setup/Config the plane (not from C&D but running on Ground unit power) Searching and adding the needed navigraph charts to the "kneeboard" Configured the whole Aircraft and its settings incl using Checklists etc. Taxi and Take off Change the chart to a SID chart wich I stored at the kneeboard Start flying manually Engage Autopilot Run on autopilot mode Change the chart to a destination chart wich I stored to the kneeboard My issue summarized: After round about 45 to 60 minutes of using P3D with the A330 aircraft incl. initial setup at gate and flying, my FPS starts going down every 30 Seconds, for the duration of 60 seconds, and than goes up to normal again. After exactly 30 seconds down again for the duration of again 60 seconds and than up again. So the first 45 to 60 Minutes using A330 and P3D V5 everything is normal and stable! FPS between 30 and 45 with VR on! The real issues comes in after these first 45 to 60 minutes and than stays! like above explained (FPS 60 seconds down, FPS 30 seconds up.......) I am flying VR and having "normally" round about 30 to 45 FPS above African LC ORBX. When the FPS drops, it drops to round about 16 - 20 FPS AND the FPS counter seems to refresh less often. That less often means, it seems like normally it refreshes 3 to 4 times a second and in "dropped mode" just 1 to 2 times a second. Now I did run following Testcase based on the flight above, wich I "saved and shut down P3DV5". Setup for this test 1: Status Axx Config app Navigraph radiobutton selected and NOT logged in to the browser! Simlink NOT active. It is installed but I disabled the addon prior starting P3DV5 because I assume there could be a relation between this issue and simlink. Start Test 1 at 09:45 german time: 09:45 German Time Started the saved flight with the A330 at 09:45 o clock German time. Route LSZH - HKJK default airline Swiss Air full setup and flying on autopilot EFB is still showing the Checks/Flows page incl. red error message regarding charts - I did NOT change/touch any setting in the EFB. Just flying on Autopilot and leave the error as it is 10:30 German time: During flight I opened Axx Config App to log me in on Navigraph. I logged me in and I left simlink "untouched"! No simlink active! I clicked the Error messages (2) in the EFB away I refreshed the EFB while staying still on the Check/Flows page by double click on the page (double click on checks/flows page - standard refresh/reload function EFB) 11:45 German time: I checked the status in the Axx Config app to see if I am still logged in. That is not the case anymore. Status now is "Logged out". Button "Login in browser" is shown. I did not change anything else yet. 12:15 german time: Till now the FPS are still stable and NOT showing any "drops" which lasts between 45 and 60 Seconds (that was the case before when using simlink and navigraph charts). I still did not use the EFB Navigraph chart page and still Simlink is not active yet 12:30 german time: FPS are still stable. I clicked "Charts" Tab in EFB and loaded in a Chart from the "Kneeboard" wich I "added" there before starting my testcase. NOTE: Did not refresh the EFB again. Chart could be loaded without refreshing/reloading the EFB. No errors came up allthough I am "not" logged in regarding the Aerosoft A330 Config app. I can also load any other chart shown in the EFB. Regardless the Airport. So the EFB connection must be "active" / "existing" in background. OK for me so far. 13:00 german time: Still stable FPS between 30 and 45. 13:07 german time: Saved the flight and shut down P3D. Till so far no issues (Simlink still deactivated and not in use). Start test 2 13:08 german time: At the A3xx app I now logged in prior starting P3D V5 via "login in browser" (navigraph), clicked "yes allow" in Chrome Broser and closed the browser and the A3xx config app (NOTE: simlink is still deactivated and NOT used) 13:10 german time: Started P3D V5 13:13 german time: Loaded saved flight (still above African LC ORBX). EFB shows no errors (which is ok as I am logged in). I clicked the "charts TAB" and loaded a chart from the kneeboard. Also I did the "Wind" updates on the "init page". FPS are between 30 and 45 again. So still stable and normal behaviour. I will now keep the flight for at least 1 hour running (to see if the FPS drops again with just using Navigraph charts and initially being logged in into the Navigraph browser. Simlink not in use yet). 13:58 german time: exactly after 45 minutes FPS drops again to between 18 and 25 fps for the duration of round about 60 seconds. Than up to normal behaviour between 30 and 45 fps for 30 seconds again. Than drops to between 18 and 25 again....this itteration behaviour stays and does not go away. I check the "logged in status" via Axx config app. I am still logged in. restarting the app a couple of times does not yet change that. A few minutes (between 5 and 10) later the app shows I am NOT logged in anymore! So the app logged me out automaticly (probably after round about 45 to 60 minutes total time being logged in). I stopped the flight after that by closing P3D Summary: Simlink is excluded as I deactivated it and it is not used in this test! Without using Navigraph charts and not being logged in before starting P3D and a flight with an A330, there are NO issues at all. If logged in by using "login to browser" via the Axx config app, prior starting P3D, and than start a flight and using navigraph charts, this issue occurs. If not being logged in by using "login to browser" via the Axx config app"before starting P3D not problems and also no problems WHILE flying, loggin in and refreshing the EFB. This issue will NOT come up! Only if prior starting P3D and a flight being logged in! This issues is reproducable every time with this setup. This issues does NOT occur using other planes. Also NOT with PMDG and his EFB. This issue does not occur if not being logged in via Axx config app with "login to browser" and therefour NOT using the navigraph charts So there must be a relation to A330, EFB and Navigraph when you log in before using P3D and starting a flight. It seems that if the EFB is loosing the connection it is running some processes to reconnect but it fails! This starts everytime after round about 45 to 60 minutes......so everytime short around the time the App shows you that you are logged out again! At 14:45 German Time I reloaded the saved flight again, not being logged in via Axx config app and leaving the 2 error messages on the EFB without touching anything. FPS are back again to nromal behaviour! Hope this helps sorting out the problem. Regards Marcus
  22. Thanks Mr. Kok! All my stated above does seem to fit. Ifurther testing and will report back with time stamps and exact describing my case
  23. @DaveCT2003 Dave. I hope you are doing well? I think I did found the cullprit. It seems to be related to Navigraph/Simlink. If using Navigraph then every 30 seconds my FPS went down from high 50is to low 20is. In VR even worse (of course) This is only when using Navigraph charts and before starting P3D being logged in via the Axx configurator (Green confirmation that I am logged in). After a time flying suddenly my FPS dropped. This FPS drop exists over 60 Seconds! After 60 Seconds it goes up again to normal behaviour. Then it goes down again after exactly 30 seconds. This lasts again 60 seconds....and so far and so on. Logging out during flight from Axx Configurator and reloading the EFB (Double click) does not seem to have any influence. BUT: I did shutdown P3D. Also I logged me out of Axx Configurator and disabled simlink addon.xml. Now I reloaded my saved flight. No FPS stays stable and does not drop after a couple of hours flying. The issues seems to be the combination of A330 with Navigraph charts. I already thought that and also mentioned that in my posts earlier. Now I tested it and I may have located the issue nearer. Is the EFB trying to "reconnect" Navigraph and some processes "hammer" the system so worse that the FPS may suffer? Please take a look into this. Because I would like to use the A330 with Navigraph. Now it is unusable in this way. My latest Simlink version is downloaded this morning and does not have any positive effect on this. Version: navigraph-simlink-win- With Aerosoft Airbus 330 My System specs: Prepar3D_v5_Academic_5.0.24.34874 Edition Windows 10 Home Version 2004 Installed on 20200501 OS Build 1904.208 Experience Windows Feature Experience Pack 120.2202.130.0 Latest Nvidia Drivers HMD VR WMR HP Reverb v2 i7 8700K all cores to 5.1 GhZ HT OFF 32 GB RAM 3600 MhZ Corsair Vengeance RTX Titan 24GB 32" Samsung UHD Monitor using highest resolution Addons ASP3D 7434 Open Beta ChasePlane (via ORBX) GSX 2 Airbus A330 PMDG 747/748 QW787 V1.3.0 Navigraph Charts/Simlink ORBX Base ORBX LC ORBX TE NL ORBX Regions ORBX HD Buildings ORBX HD Trees Several Addon Aiports all by .xml method installed
  24. Try to uncheck the checkbox in the Aircraft configurator (Axx Configurator) under the section "Performance" named "Force ECAM Software Rendering" since I unchecked it, no CTD with this D3D10warp.dll messages anymore Regards Marcus
  • Create New...