Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by dookster49

  1. Hello, I am being prompted by the Aerosoft Updater to process an update to my 320/321 Professional Series. However, I originally purchased the software from "FS Pilot Shop", which is no longer in business. I still have the serial key associated with the order, so is there a way to run this through the Aerosoft site? If so, please provide a step-by-step. Thank you! Larry Dunson
  2. Hi, must've been a one-time occurrence, as I've flown several missions since, with no more "self-check" notices. However, there are a few other issues with this new aircraft which puzzle me... 1) During the automated checklist routine, simply pressing the RCL tab will not eliminate the flight crew continuing to say ECAM RECALL. A simple press of that tab on the A320/21 is sufficient and allows the checklist to continue. 2) The most annoying issue with this aircraft is the constant changing of views during the checklist routine. Is there a way to disengage that? I'm able to see the entire cockpit on my large monitor, so am able to access all switches, tabs, buttons, etc. without the screen views changing. Thanks for any assistance you can provide. Larry
  3. All of my displays are showing a message that a self-test is in progress, max 40 seconds. However, it’s been over 10 minutes now. Any way to remedy while in flight? Thanks! Larry
  4. Well, I've run into a bit of a snag with re-downloading the A320/21 Professional Package. I originally ordered it from "FS Pilot Shop", and now it appears that they're out of business. I still have the license key, etc., so is there any way I can download it again through Aerosoft? Or, will I have to order it again as new, which of course I will do through Aerosoft this time? Thanks! Larry
  5. Hi, while attempting to run Aerosoft Updater, I was met with this message (see screenshot). What does this mean, and how do I locate/install the mentioned update? Thanks, Larry
  6. This turned out to be a bad case of user error. I discovered that I had not included the Airbus Professional Series in the FMS Manager for Navigraph. Therefore, I only had an old, probably original, AIRAC on the MCDU..1800’s! I’ve made the necessary corrections and updates. All is well now.
  7. I fly the Airbus A320/21 on the P3D_v4 sim. Today, the MCDU is no longer recognizing the current AIRAC data, therefore not loading my SimBrief flight plans. I've shut everything down, rebooted, etc., etc., but no joy. Is there a fix for this? Thanks!
  8. Planning to upgrade to a new, faster PC to run my sim. I typically fly the Aerosoft Airbus A320 Professional. Will appreciate feedback as to the efficiency and effectiveness of this machine. Thanks! Dell i5680-7813BLU-PUS Inspiron Gaming PC Desktop 5680, Intel Core i7-8700, 16GB DDR4 Memory, 128GB SSD+2TB SATA HDD, NVIDIA GeForce GTX 1060, Recon Blue, Windows 10 64-bit
  9. Planning to upgrade to a new, faster PC to run my sim, the P3D_v4. I typically fly the Airbus A320 Professional on this platform. Will appreciate feedback regarding the specs on this machine. Thanks, Larry Dell i5680-7813BLU-PUS Inspiron Gaming PC Desktop 5680, Intel Core i7-8700, 16GB DDR4 Memory, 128GB SSD+2TB SATA HDD, NVIDIA GeForce GTX 1060, Recon Blue, Windows 10 64-bit
  10. I would be really interested in the sim settings recommended by the developers. Is that information available anywhere? Thanks! Larry D
  11. I'm having the same problem, both during the takeoff roll and during final approach...even if configured to auto-land. I (try to) fly the A320 Professional on the P3D_v4 sim, with the following computer capabilities: Acer Aspire E 15 laptop Intel Core i5 - 6200U 2.3 GHz with Turbo Boost up to 2.8 GHz NVIDIA GelForce 940 MX with 2 GB Dedicated VRAM 8 GB DDR4 Memory 256 GB SSD Thanks, Larry
  12. Hello, I am experiencing an issue with the A320 Professional, on the P3D_v4 sim. On all approaches, even if calm winds, and even if configured to auto-land, the aircraft wobbles badly, almost to the point of total loss of control by the time of touchdown. Will appreciate any recommendations to remedy this very annoying issue. Thank you! Larry D
  13. Hello, I fly the Airbus A320 Professional on the P3D_v4 platform. Are there any options for the pilot/first officer voices, other than what's built in to the software at purchase? Thanks! Larry D
  14. I had not performed any updates on the aircraft, so I performed a clean reinstall of the Airbus. Success...the panel numbers are now a normal size. However (and this may be a P3D issue), when I restarted P3D_v4, the following message (photo attached) appeared. It did not prevent the software from loading, and the Airbus panels look normal, but I haven't flown the aircraft yet. Please take a look at the photos below and let me know if you know what this means. Thanks for your assistance! Larry D
  15. Started my simulator today (like most days) and noticed right away that the fonts for all panel display numbers have suddenly enlarged (on their own) to a point that I'm unable to use the read-outs as usual. Has anyone else had this issue? Can you provide a fix? Photos included. Thanks! Larry D
  16. Thanks, uninstalled then reinstalled the Bus Pro package, which includes the Updater. I ran it and am attempting a flight now, from KMSP to KRDU. Once again, the taxi out to the runway was all over the place..hard to control, and the takeoff and climb out just as bad. Aircraft is constantly jerking side to side, so unstable. I'm beginning to think that maybe my laptop is not equipped to run this package. Here are the specs... Acer Aspire E-15 Intel Core i5-6200u 2.3 GHz with turbo boost up to 2.8 GHz NVIDIA GeForce 940 MX with 2 GB dedicated vram 8 GB DDR4 memory 256 GB SSD Is this machine simply not going to work with the Airbus Pro package? Thanks, Larry
  17. Checked my Norton A/V, and the Updater is not on the quarantine list. So, is it best to uninstall, then reinstall the Bus package at this point..with the A/V disengaged? Thanks!
  18. Also, how do I determine the FPS for my sim and airbus? Thanks!
  19. I did find the following files..see attachments. However, there does not appear to be any type of executables in these folders/files. Very confused. Larry
  20. I am really stumped on this. Cannot find "AS Updater" anywhere on my computer, but I do have the Aerosoft Airbus 320/21 Pro package installed. What are my options? Thanks, Larry
  21. What is that and where do I find it? Thanks, Larry
  22. Hi, I'm flying the A320 Pro on the P3D_v4 platform. Since loading it a few weeks ago, I've not had one successful take-off or landing. I use real-time weather, which is usually of no consequence for proper flight. From the time I start taxiing to take-off, I am unable to properly steer the aircraft on the taxi ways and even down the runway on the takeoff roll. Then, from the time I take off until I reach altitude, the airplane shakes/tilts violently from side to side, sometimes even causing the auto pilot to disengage. After reaching T/C, the ride is usually smooth and uneventful..until I begin the descent. Even with very clear weather and light winds, the airplane once again shakes/tilts violently from side to side, all the way down to the runway, making a "normal" landing all but impossible, even if I try to use the auto-land feature. What can possibly be causing such problems? Thanks, Larry Dunson
  • Create New...