Jump to content

NineMile

Members
  • Posts

    28
  • Joined

  • Last visited

Everything posted by NineMile

  1. I forgot this will be my last post on this forum. Have a great day Aerosoft
  2. Aerosoft said they had a fix. When will it be released waited now for 4 month. They have my money but I do not have a working aircraft? I believe this will be the last purchase from Aerosoft I am writing it off as a bad decision. Using the CRJ 4 with the mod. Works like a charm.
  3. it is obvious that thx1137 does not know what he is talking about. Because the conflict is between the Microsoft controller and Aerosoft controller. You should go back to flight school before you submit your crazy answers.
  4. I do not understand why they are reluctant to tell us yes we understand the problem and we are working on it. Instead they tell us there are no problems then the tell us to run their throttle program knowing nothing is working? Must be pride I hope they change their attitude in the future. Because the aircraft is a great achievement but if the throttles don't work we don't have an aircraft. On the positive side let's wait for the fix. Thank you
  5. Bought the CRJ 2 month ago. Waiting for the patch at least they seam to now admit that there is a problem. Let's hope WASP is not causing the problem every time Asabo releases a fix others have to adjust for it. CRJ In the hanger waiting to get out and fly.
  6. I have parked my CRJ. No sense to discuss this any further with people that have limited knowlege. Just waiting for a fix. Your problem is exacly the same as mine and others. Thanks for your input
  7. It looks like that the WASM is still in it's infency. Let us not lose sight of the fact that the WASM implementation in MSFS doesn't exist yet, they are still developing it. What, if, when, how everything fits together we will find out when it is ready. It also doesn't make a lot of sense to quote the spec at this point. Whatever Asobo will do with WASM, the result will probably be their very own brand - FSASM This could be the problem?
  8. This was your reply:Mathijs Kok I am sorry you are disappointed, but it simply does work fine on my system. The Warthog throttle is a very basic potentiometer system and unless it has an issue there is no reason why it should not work. It simply has to be a setting or a driver. My understanding of your reply is it works fine and there is no reason why it should not work or it is simply has to be a setting or driver. Which translates to CRJ is working which is not the case.
  9. MY feeling is that Aerosoft is not translating or are not in synchronization with Microsoft Flight Sim throttle controls.
  10. Mathijs Kok your answers are to simplistic. 1. The levers in the simulator are moving to the maximum they do not stop at 70%. 2. Followed the EFB calibration procedures as described. 3. Sensitivity curve of the throttle axes is set to linear. 4. No mixture assignment on any axes. Additional information: 1. When I go to external view and watch my throttle setting that is were I see the 70% Power and it fluctuates up and down. 2. CYQA airport has a runway length of 6000 feet using the CRJ with flaps it is having a hard time taking off in that distance "showing lack off power" 3. As previously said no other aircraft is having this problem?
  11. Also noticed one other item: When you go to external view in Microsoft Flight Simulator I notice that watching the engine #1 and engine#2 on other aircraft the power % shows green with the white needle. When using the CRJ the engine#1 and engine #2 looks like it is washed out no color at all?
  12. Same issue with Thrustmaster HOTAS Throttles. Aerosoft says no problem it works. What a silly answer when they admitted that they fixed the throttle issue with their update. Only problem the update fixed nothing? I am not sure where to go from here except wait for a fix?
  13. Thank you for your reply you did not make the comments. Now as to your questions: 1. The levers in the simulator are moving to the maximum they do not stop at 70%. 2. Followed the EFB calibration procedures as described. 3. Sensitivity curve of the throttle axes is set to linear. 4. No mixture assignment on any axes. Additional information: 1. When I go to external view and watch my throttle setting that is were I see the 70% Power and it fluctuates up and down. 2. CYQA airport has a runway length of 6000 feet using the CRJ with flaps it is having a hard time taking off in that distance "showing lack off power" 3. As previously said no other aircraft is having this problem? Thanks again for asking the correct questions.
  14. I would just like to add the following information: I am a private pilot single and multi engine aircraft. I have been using flight sim software since 1982. I have been a Beta Tester for Microsoft and others. Please don't address me like I don't know what I am talking about. Thank You
  15. Latest Driver from Thrustmaster. As far as settings? Why does the throttle work with every other aircraft? Why does Aerosoft admit that they have a throttle problem in their update? Why does the Throttle only advance to 70% at Max power when using the CRJ? Your response is too basic without any explanation of the above. If you are still in the process of trying to fix the issue just admit it. I have no problem waiting for the solution. Thank You
  16. I just did the CRJ update and they say Throttle improvement? I have a Thrustmaster HOTAS WARTHOG Throttle does not work. Even after the update. Using the default throttle setup power only goes to 70% max Copying the throttle and calling it the HOTAS Throttle CRJ and making the following adjustments: Throttle 1 Axis , Throttle 2 Axis same problem max 70% and it jitters between 70%-79% max? Setting it up as a single throttle only using Throttle Axis same problem as before. NO PROBLEM WITH ANY OTHER AIRCRAFT? It will be put back in the hanger. After spending 4 hours trying every possible solution (Very disappointed)
  17. I bought it from Microsoft so I guess no sense buying anything from the market place. NO SUPPORT Also checked the throttle advance for all other aircraft Max = 100% Aerosoft CRJ the throttle only advances to Max = 77% Therefore the CRJ throttle interpretation from Microsoft does not work correctly. Could be only the Thrustmaster HOTAS WARTHOG? In any case the CRJ is in the hanger. How can you get airborne on a 6000 foot runway with 77% Power that also fluctuates up and down like a YOYO? Waiting to hear from Microsoft or Aerosoft Disappointed is an understatement.
  18. I am not sure if I agree with SimWare with his comment: The Warthog is a simple device made of analog axes and buttons. Totally similar to any other devices. There is no reason why it would not work. I have tested it myself without any trouble. Are you sure we are talking about the same item? https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwi0jJiTvcfvAhWOisgKHVduDUIYABAEGgJxdQ&ae=2&ohost=www.google.com&cid=CAESQeD2Ry_LJkJZJxDnLKEbc-l6bwtPdjfNaiUSpo-31nfq9p8rbWwnMESHyBR0HGCPOvEWc_5pOnBTVky1So1DfWtI&sig=AOD64_3G3pguhSJWU-qIUbL2EBrix5f18Q&ctype=5&q=&ved=2ahUKEwi5x46TvcfvAhXHFFkFHWDsDKsQ9aACegQIARBD&adurl=
  19. Thanks for replying at least you are showing the HOTAS WARTHOG THROTTLES. Are you telling me that you are running the CRJ with your default Throttle setup because Microsoft assigns these by default? Did you make any modifications? Next are you telling me you do not use the Aerosoft Throttle setup? Is your HOTAS up to date as far as firmware update by Thrustmaster? Are you plugging your HOTAS to a 2.0 USB or a 3.0 USB I am trying to check everything because I use the HOTAS Joystick, HOTAS Throttles and Thrustmaster TM Rudders and have been using them for 8 years without any problems in FSX, P3D and Microsoft with all aircraft only the Aerosoft CRJ is giving me problems. I am at a loss.
  20. I believe it could be a problems with the CRJ Throttle Control? It could also be that we need a fix from Microsoft? Then again why do all other aircraft have no throttle problem? The HOTAS WARTHOG IS A KNOWN HIGHER END CONTROLLER. Why was it not tested? I would think that Aerosoft at least would acknowledge the problem instead of all of us trying to find a fix? In any case it is parked in the hangar.
  21. I would have to agree the Raw Input Data change as I move the throttle. But I am at a loss as to what? Only answer I have is that it is not compatible with the Thrustmaster Hotas Warthog. Hope someone will come up with an answer?
  22. 1. Here is the video. 2. Microsoft has one setup for all of your aircraft for your Throttle. Why does Aerosoft required a separate setup for the Throttle? 3 Error message. Error Engine #1 and #2 CLB overtaps TOGA? 4. Any adjustment made IDLE, CLIMB,TOGA AND MAX POWER always inputs -99999? Action 2021-03-23 9-48-55 AM.mp4
×
×
  • Create New...