Recently we have seen a lot of codes used to unlock our products being offered for discounted prices. Almost all of them are bought using stolen credit cards. These codes will all be blocked by our systems and you will have to try to get your money back from the seller, we are unable to assist in these matters. Do be very careful when you see a deal that is almost too good to be true, it probably is too good to be true.

Jump to content

West_GD

members
  • Content Count

    2
  • Joined

  • Last visited

About West_GD

  • Rank
    Ramp Agent
  1. Thank You for Your help. So, first of all the ZFM of the plane must be changed from 6850 (20 seats) to 6500 (cargo) in Aircraft.cfg: [WEIGHT_AND_BALANCE] empty_weight = 6500 // 6850 = Seats Installed, 6500 = Freight max_gross_weight = 12500 empty_weight_pitch_moi = 18782 empty_weight_roll_moi = 12419 empty_weight_yaw_moi = 31388 empty_weight_coupled_moi = 1600 reference_datum_position = 0.000, 0.000, 0.000 empty_weight_cg_position = -0.730, 0.000, 0.000 max_number_of_stations = 12 station_load.0 = 170.0, 9.27, -1.40, -2.00, station_load.1 = 170.0, 9.27, 1.40, -2.00, station_load.2 = 0.0, 5.94, 0.00, -2.00, station_load.3 = 0.0, 3.44, 0.00, -2.00, station_load.4 = 0.0, 1.10, 0.00, -2.00, station_load.5 = 0.0, -1.56, 0.00, -2.00, station_load.6 = 0.0, -3.98, 0.00, -2.00, station_load.7 = 0.0, -6.23, 0.00, -2.00, station_load.8 = 0.0, -8.48, 0.00, -2.00, station_load.9 = 0.0, 15.10, 0.00, -3.00, station_load.10 = 0.0, -12.31, 0.00, -3.00, station_load.11 = 0.0, -15.40, 0.00, -3.00, station_name.0 = Pilot station_name.1 = Co-Pilot station_name.2 = Row 1 station_name.3 = Row 2 station_name.4 = Row 3 station_name.5 = Row 4 station_name.6 = Row 5 station_name.7 = Row 6 station_name.8 = Row 7 station_name.9 = Fwd (200lb) station_name.10 = Aft (500lb) station_name.11 = Aft Ext (150lb) Then, You need to change (in aircraft.xml) value "paxmax" to 0, "maxcargo" to 2064kg, which give 4550lbs, then "bow" value must be changed to 2949kg which is 6500lbs. <AircraftConf> <type>DHC-6 300</type> <displayname>DHC-6 300 Wheels\Tundra\Ski 75%/1650RPM</displayname> <paxmax>0</paxmax> <!-- Set one if available, then set max value --> <paxpayloadposition>0;0;1;1;1;1;1;1;1;0;0;0;0;0;0</paxpayloadposition> <paxpayloadmax>0;0;3;3;3;3;3;2;3;0;0;0;0;0;0</paxpayloadmax> <!-- Weight of one passenger --> <paxweight>84</paxweight> <maxcargo>2064</maxcargo> <!-- Set one if available, then set max value --> <cargopayloadposition>0;0;0;0;0;0;0;0;0;1;1;1;0;0;0</cargopayloadposition> <cargopayloadmax>0;0;0;0;0;0;0;0;0;90;227;68;0;0;0</cargopayloadmax> <!-- Bag weight --> <bagweight>10</bagweight> <!-- Design weights --> <mtow>5670</mtow> <mtw>5670</mtw> <mlw>5580</mlw> <bow>2949</bow> <mzfw>5670</mzfw> <maxpayload>2200</maxpayload> <center1>550</center1> <center2>598</center2> <righttip>112.4</righttip> <lefttip>112.4</lefttip> <maxfuelonboard_kg>1372</maxfuelonboard_kg> <maxusablefuel_kg>1372</maxusablefuel_kg> <maxusablefuel_gal>452</maxusablefuel_gal> <!-- Fuel burn values --> <cruize_scalars>4.77544257;-38.6996904;9.40079979;-8.54370088;0.02522704;559.16850951</cruize_scalars> <taxi>100</taxi> <!-- Cruize, descent & climb factors - for fine adjustments --> <climb_factor>1.0</climb_factor> <cruize_factor>1.0</cruize_factor> <descent_factor>1.0</descent_factor> <climb_fuel_FL260>180</climb_fuel_FL260> <climb_time_FL260>40</climb_time_FL260> <climb_dist_FL260>80</climb_dist_FL260> <descent_fuel_FL260>60</descent_fuel_FL260> <descent_time_FL260>20</descent_time_FL260> <descent_dist_FL260>40</descent_dist_FL260> <cruize_tas>180</cruize_tas> </AircraftConf>
  2. Hello, I want to ask You about one thing, the fuel planner for Twin Otter allows only to load 20 pax and only about 849lbs of cargo. But I am flying my Twin Otter only for cargo operations in Air Hauler 2, so - is there a planner which allows me to load more cargo for my plane? Because at the moment I can't find one I load my plane like this: Simulating cargo by 20pax * 182lbs = 3640lbs then I add cargo for value that is required by Air Hauler 2 job. But it is a little bit annoying, so maybe there is a solution?
×
×
  • Create New...