Recommended Posts

Here are the paintkit, just click on to download that specific paintkit.

 

 

Paintkit Bundle of all                   DOWNLOAD
Paintkit VC                   DOWNLOAD
Paintkit 700 American Eagle                   DOWNLOAD
Paintkit 700 Lufthansa Regional Star Alliance                   DOWNLOAD
Paintkit 700 Lufthansa Regional                   DOWNLOAD
Paintkit 700 HOP                   DOWNLOAD
Paintkit 700 United                   DOWNLOAD
Paintkit 900 US Airways                   DOWNLOAD
Paintkit 900 Eurowings                   DOWNLOAD
Paintkit 900 Delta                   DOWNLOAD
Paintkit 900 Air Nostrum                   DOWNLOAD

 


VC [DOWNLOAD]
vc.thumb.jpg.f36c603b032753f908cfbbcba91

700 American Eagle [DOWNLOAD]
700_American.thumb.jpg.de89e59a2f8539b5c

700 Lufthansa Regional Star Alliance [DOWNLOAD]
700_LH_RegStar.thumb.jpg.45e1744f70f2549

700 Lufthansa Regional [DOWNLOAD]
700_LH_Regional.thumb.jpg.eb558335a1bbfd

700 HOP [DOWNLOAD]
700_HOP.jpg

700 United [DOWNLOAD]
700_United.jpg

900 US Airways [DOWNLOAD]
900_USAirways.thumb.jpg.5fe0fe98ae9901dc

900 Eurowings [DOWNLOAD]
900_EuroWings.thumb.jpg.054e9b91a665af71

900 Delta [DOWNLOAD]
900_Delta.thumb.jpg.294f7990b311c3ddb311

900 Air Nostrum [DOWNLOAD]
900_AirNostrum.thumb.jpg.3fa79e440369e80

 

  • Upvote 4

Share this post


Link to post
Share on other sites
On 17/12/2015 at 10:36 AM, asturias said:

Friends Aerosoft , Air Nostrum has a new image over one year.

Thank you

5.png

This livery is on repaint...

regards

Share this post


Link to post
Share on other sites

Gibt es jetzt einen zuverlässigen Release Termin? 

Wurde ja jetzt schon von September auf Dezember verschoben:rolleyes:

Share this post


Link to post
Share on other sites

Einfach mal in diesem Topic per Forum Suche nach "release" suchen. Da findet sich alles was zu dem Thema gesagt wurde.

 

 

Share this post


Link to post
Share on other sites
On 23.9.2016 at 04:01, sn512 sagte:

Gibt es jetzt einen zuverlässigen Release Termin? 

Wurde ja jetzt schon von September auf Dezember verschoben:rolleyes:

23. 3. 2017 :D

Hype Hype :clapping_s:

  • Downvote 1

Share this post


Link to post
Share on other sites

Question to Aerosoft about the paint kits containing Holgi's liveries:

I'm currently modifying the American Eagle paintkit with updated stickers for Operated By: PSA  plus a few other enhancements.

I'm interested to know the  EULA concerning redistribution if it's different than a typical one? (mention the texture author in the credits, don't sell it or upload to a sales site, etc?).

I only have one request for theses updates so far and don't want to distribute until I know what's acceptable.

598152fa2700a_AECRJ03.thumb.jpg.efe934eaee44c05d62efde7cdc5aff6e.jpg

 

 

I'm also planning on doing several Frontier CRJs using the plain white textures...same question regarding the EULA on any paints I'll release to the community.

597fe0be735bd_CRJFrontier01.thumb.jpg.7149612c86095b373a4d85d97c4fbc5c.jpg

 

Congrats on the release!

I grabbed her this morning and loaded her up for 10 mins before leaving for work, very. very nice.

Not sure how much I'll actually fly her, but I was purchasing regardless to support Hans and the team's hard work and persistence in this journey. 

 

I don't plan on taking requests at this time, however, I'll monitor this thread and see what folks are asking for.   Any CRJs I personally want to fly and will come out of my paintshop will of course be offered to our community pending answer to my EULA question.

Share this post


Link to post
Share on other sites

When can we expect master paintkit file where the entire fuselage is not split in three different parts? Try to paint Nordica (blue transition) on the current paintkit. Total nightmare.

maxresdefault.jpg

  • Upvote 1

Share this post


Link to post
Share on other sites

The copyright of the American Eagle livery should be with me. If you make alterations to it, simply tell about the initial author and then yourself and your additions.

 

Nordica paintkit: Where is the nightmare? There is no nightmare! I will create a quick template for the painter of the 700. Later you must split up so or so the stuff up again, which i never do. I think Holgi has also no problem with this kind of working.

 

Not forget to create three pixel layers of flesh then on the cut, as the graphics cards blur out those areas (also called TEXTURE BLEEDING). You encounter this with adding a border of three similar pixels by copy and paste...

 

Share this post


Link to post
Share on other sites

Keep in mind we have the same type of paintkit on the Airbusses and we got over 1600 (!) liveries for download. The people who worked on those did not find it problematic.

Share this post


Link to post
Share on other sites

Here is the "master painkit" for all three sections together. Use the colored squares as calibrators to insert the large pieces into the smaller final textures. The squares must be located cleanly in the upper left corner of each texture map, without any gap. The the texture sits correct in the "local texture sheet" (3 of 3).

ASCRJ700_TRIPLE_TEMPLATE.psd

  • Upvote 1

Share this post


Link to post
Share on other sites
5 minutes ago, Stefan Hoffmann said:

Here is the "master painkit" for all three sections together. Use the colored squares as calibrators to insert the large pieces into the smaller final textures. The squares must be located cleanly in the upper left corner of each texture map, without any gap. The the texture sits correct in the "local texture sheet" (3 of 3).

ASCRJ700_TRIPLE_TEMPLATE.psd

 

Is it possible to have a PSD like the one you just posted the 900?

  • Upvote 1

Share this post


Link to post
Share on other sites

Thanks for the info Stefan!  And apologies for the mixup on the American Eagle textures.  I'll list you as the author in my credits. ;)

The combined template is very handy...I appreciate the extra effort as it will help speed things up a bit (I was prepping one myself but still had some trial and error adjustments to make...always better to get one from the modeler...who better to know the texture map layout? hehe).

 

The only nightmare I'm experiencing is deciding how many additional paints I'll do other than the ones I've already committed to. :wacko: 

Having a great paintkit and fantastic model to paint on is how I wind up painting dozens of liveries instead of just a few...I need to control that urge...but you didn't make that easy Stefan!

 

Thanks again for the info, and congrats on the wonderful plane.  This was one I wasn't initially interested in, being a long-haul guy...but I needed a commuter to get me between short city-pairs, and its really nice to add a new aircraft type to the existing Airbus and Boeing fleet I maintain!  (I was still buying it to support you guys, and to paint it, but will actually fly it too! LOL)

 

Just waiting to take her from the new, V4 EDDF in a LH regional to ELLX for my Cargolux 747 flight to the US. :D  

Share this post


Link to post
Share on other sites

I am not able to install the eurowings livery. It is in .7z format so I unpacked it and zipped it as a .zip but it only says "Sorry, this file cannot be installed" in the livery manager..

 

Edit: I see theres a eurowings livery in it already, but it is not displaying as a eurowings in P3D?

 

Image%202017-08-05%20at%202.18.32%20AM.png?X-CloudApp-Visitor-Id=6395573459ede971ced9c6ed293d2fa0&v=77328710

Share this post


Link to post
Share on other sites

@Stefan Hoffmann any possibility to change the paintkit a bit? The tail is the worst part due to being splitted up into three pieces. If you have to place something which spreads over all three parts it`s horrible (eg nordica). I can`t seem to figure out how to place them. I made myself a master file for the fuselage.

 

crj base.PNG

2017-8-4_13-49-6-110.jpg

Share this post


Link to post
Share on other sites
vor 3 Minuten, Stefan Hoffmann sagte:

Why dont you introduce reference lines?

 

I added them, check the registration, I know where to split the fuselage

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now