Kaito164 20 Posted May 17, 2015 Share Posted May 17, 2015 Hi Habe ein gebrauchtes Saitek Multi Panel bekomme und wollte es so Lange nutzen bis ich das mit der Arduino Programmierung in den Griff bekomme. Heinz Flichtbeil ( Danke noch mal ) hat mir ein Plugin empfohlen was dann auch mit meine CRJ und ein par andere Flieger Funktionierte, leider fehlt da die LUA Anpassung für den A330 von JAR. Das Script für den A320neo geht leider nicht, evtl. kann mir jemand helfen das LUA Script für das Autopiloten Panel zu erstellen =) Soweit ich das Script verstanden habe muss ich erst mal eine Abfrage machen ob es die A330 ist und dann Dataref Befehle anpassen. Das LUA Script für den a320neo habe ich mal eingefügt. Ein Anliegen habe ich da noch Suche für das Panel die Halterung, leider fehlt sie mir da es ja Gebraucht war. Wenn jemand noch eine nicht benutze abgeben möchte oder eine Idee hat wo ich das Teil mit Schrauben einzeln herbekommen kann währe Klasse. So kann ich es leider nicht auf den Yoke befestigen -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Script: A320 Neo engine start and more -- Version: 1.4 -- Build: 12-29-2014 -- William Good -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Description: -- Provide a script to help in starting engines -- I am using my Saitek Pro Flight Throttle, Prop and Mixture System -- I am using the swithes to expand what I have control over. -- G3 APU master switch and start button G6 APU generator -- G4 Hydraulic pumps Green, Blue and Yellow -- G5 Air Condition -- added function multi_panel_display_fix fpr people with only a multi panel -- added function auto_throttle to make the auto throttle switch work like a button. -- decreased delay in autopilot altitude update on multi panel -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- if PLANE_ICAO == "A320" then require("xsaitekpanels_multi") -- we need define the DataRef dataref("ApuMaster", "sim/cockpit/engine/APU_switch", "writable") dataref("ApuStart", "sim/custom/xap/apu/start_pb", "writable") dataref("ApuGen", "sim/custom/xap/elec/apu_gen_on", "writable") dataref("AltSelect", "sim/custom/xap/fcu/100_1000", "writable") dataref("Alt1000x", "sim/custom/xap/fcu/alt1000x", "writable") dataref("Alt100x", "sim/custom/xap/fcu/alt100x", "writable") dataref("HydEngGrn", "sim/custom/xap/hydr/g/engpump/mode", "writable") dataref("HydElBlu", "sim/custom/xap/hydr/b/elpump/mode", "writable") dataref("HydPtu", "sim/custom/xap/hydr/ptu/mode", "writable") dataref("HydEngYel", "sim/custom/xap/hydr/y/engpump/mode", "writable") dataref("HydElYel", "sim/custom/xap/hydr/y/elpump/mode", "writable") dataref("Pack1", "sim/custom/xap/cond/pack1", "writable") dataref("Pack2", "sim/custom/xap/cond/pack2", "writable") dataref("Eng1Bleed", "sim/custom/xap/bleed/eng1_bl_knob", "writable") dataref("Eng2Bleed", "sim/custom/xap/bleed/eng2_bl_knob", "writable") dataref("CockpitKnob", "sim/custom/xap/cond/ckpt_knob", "writable") dataref("FwdCabinKnob", "sim/custom/xap/cond/fwd_knob", "writable") dataref("AftCabinKnob", "sim/custom/xap/cond/aft_knob", "writable") dataref("HotAir", "sim/custom/xap/cond/hot_air", "writable") dataref("Bat1On", "sim/custom/xap/elec/bat1_on", "writable") dataref("Bat2On", "sim/custom/xap/elec/bat2_on", "writable") dataref("SimBatOn", "sim/cockpit/electrical/battery_on", "writable") dataref("AutoThrottleMode", "sim/custom/xap/ap/athr_mode", "writable") dataref("ShareFloat1", "bgood/xsaitekpanels/sharedata/float1", "writable") dataref("ApAlt", "sim/cockpit/autopilot/altitude", "writable") -- change button number to match what your button numbers function apu() if not button(162) and last_button(162) then ApuMaster = 1 ApuStart = 1 end if button(162) and last_button(162) then ApuMaster = 0 ApuStart = 0 end if not button(165) and last_button(165) then ApuGen = 1 end if button(165) and last_button(165) then ApuGen = 0 end end function set_ap_alt() if (MULTI_ALT_SWITCH == 1) then if (last_multi_knob_inc == 1) and (MULTI_KNOB_INC == 0) then if (AltSelect == 0) then Alt100x = Alt100x + 1 end if (AltSelect == 1) then Alt1000x = Alt1000x + 1 end end last_multi_knob_inc = MULTI_KNOB_INC if (last_multi_knob_dec == 1) and (MULTI_KNOB_DEC == 0) then if (AltSelect == 0) then Alt100x = Alt100x - 1 end if (AltSelect == 1) then Alt1000x = Alt1000x - 1 end end last_multi_knob_dec = MULTI_KNOB_DEC ShareFloat1 = Alt100x * 100 ApAlt = ShareFloat1 end end function start_hyd() if not button(483) and last_button(483) then HydEngGrn = 1 HydElBlu = 1 HydPtu = 1 HydEngYel = 1 HydElYel = 1 end if button(483) and last_button(483) then HydEngGrn = 0 HydElBlu = 0 HydPtu = 0 HydEngYel = 0 HydElYel = 0 end end function air_cond() if not button(484) and last_button(484) then Pack1 = 1 Pack2 = 1 Eng1Bleed = 1 Eng2Bleed = 1 CockpitKnob = 24.0000 FwdCabinKnob = 24.0000 AftCabinKnob = 24.0000 HotAir = 1 end if button(484) and last_button(484) then Pack1 = 0 Pack2 = 0 Eng1Bleed = 0 Eng2Bleed = 0 CockpitKnob = 18.0000 FwdCabinKnob = 18.0000 AftCabinKnob = 18.0000 HotAir = 0 end end function multi_panel_display_fix() if (Bat1On == 1) or (Bat2On == 1) then SimBatOn = 1 else SimBatOn = 0 end end function auto_throttle() if MULTI_AT_SWITCH == 1 then if athr_loop < 2 then athr_loop = athr_loop + 1 AutoThrottleMode = 1 else athr_loop = 2 end else AutoThrottleMode = 0 athr_loop = 0 end end do_every_frame ("apu()") do_every_frame ("set_ap_alt()") do_every_frame ("start_hyd()") do_every_frame ("air_cond()") do_every_frame ("multi_panel_display_fix()") do_every_frame ("auto_throttle()") end Link to comment Share on other sites More sharing options...
Kaito164 20 Posted May 18, 2015 Author Share Posted May 18, 2015 So habe mal was probiert ob der A330 erkannt wird. Zum Testen habe ich den FLAPS Regler umbelegt um Fahrwerk ein und auszufahren. Sobald ich bei der IF abfrage 320 nehme funktioniert es nicht. Leider bekomme ich immer noch nicht eine anzeige auf dem Display. Finde den Passenden Befehl nicht. Möchte das so kompinieren das ich beim anschalten der Batterie das Display auch an bekommen. Mit der A320neo und den passenden Script geht es leider sind die Dataref abfragen nicht korrekt. Evtl. kann mir da jemand helfen, gibt es irgend ein Tool um zu sehen was für befehle der A330 nutzt? require("xsaitekpanels_multi") if PLANE_ICAO == "A330" then function landing_gear() if (MULTI_FLAPS_UP == 1) then command_once("sim/flight_controls/landing_gear_up") end if (MULTI_FLAPS_DN == 1) then command_once("sim/flight_controls/landing_gear_down") end end do_every_frame ("landing_gear()") end Link to comment Share on other sites More sharing options...
krähe 10 Posted May 18, 2015 Share Posted May 18, 2015 Ja gibt es . Nennt sich AC3D dazu das X Plane plugin für AC3D und schon kannst du ALLE Datarefs auslesen. Das Programm kannst du 14 Tage kostenlos nutzen. Meine Tage sind leider abgelaufen und Vollversion kostet 89 Dollar LG Ronny Link to comment Share on other sites More sharing options...
urbanswelt 0 Posted August 20, 2015 Share Posted August 20, 2015 Öffne dein acf File mit einenm Editor und suche nach z.B. nach gear ;-)Habe die 330 noch nicht kann aber nicht anderst sein wie die 320 ---> schaue mal hier ;-)https://github.com/urbanswelt/XAutoCopilot/blob/master/scripts/xac_lua/logic/xac_publish_dataref.luaSind alle 320er refs die ich gefunden hatte ;-) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.