michaelsc 1 Posted March 6, 2015 Share Posted March 6, 2015 Hi guys, I have my Airbus X Extended A320 configured to use with two monitors, showing on my second monitor as pop up PDF ND ECAM1 and ECAM2. It works fine with this configuration on the panel.cfg [Window06] size_mm=750,400 window_size=1 position=8 Background_color=0,0,0 VISIBLE=0 ident=PFD gauge00=../SimObjects/Airplanes/Aerosoft Airbus X Extended Base/Panel_Fallback/Displays!PFD, 0,20,340,340 gauge01=../SimObjects/Airplanes/Aerosoft Airbus X Extended Base/Panel_Fallback/ND/AB_ND_GDI!AB_ND_Gauge, 390,20,340,340 [Window07] BACKGROUND_COLOR=0,0,0 size_mm=340, 340 position=0 visible=1 ident=oac_ecam1 gauge00=../SimObjects/Airplanes/Aerosoft Airbus X Extended Base/Panel_Fallback/AB_ECAMU!ECAM_Upper,0,0,340,340 [Window08] BACKGROUND_COLOR=0,0,0 size_mm=340, 340 position=0 visible=1 ident=oac_ecam2 gauge00=../SimObjects/Airplanes/Aerosoft Airbus X Extended Base/Panel_Fallback/AB_ECAML!ECAM_LowA320,0,0,340,340 Also DISABLED all those displays from VC. I am trying now to do same for my A318/319 but I am getting a lot of issues. This is how my panel.cfg on the A319 CFM looks like: [Window06] size_mm=750,400 window_size=1 position=8 Background_color=0,0,0 VISIBLE=0 ident=PFD gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Displays!PFD, 0,20,340,340 gauge01=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/ND/AB_ND_GDI!AB_ND_Gauge, 390,20,340,340 [Window07] BACKGROUND_COLOR=0,0,0 size_mm=340, 340 position=0 visible=0 ident=oac_ecam1 gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAMU,0,0,340,340 [Window08] BACKGROUND_COLOR=0,0,0 size_mm=340, 340 position=0 visible=0 ident=oac_ecam2 gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAML,0,0,340,340 Disabled all in VC //gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAML,346,344,340,340 //gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/AB_ECAML!ECAM_LowA321,346,344,340,340 //gauge01=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAMU,0,344,340,340 //gauge38=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Displays!PFD, 1,3,340,340 //gauge39=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/ND/AB_ND_GDI!AB_ND_Gauge, 344,5,340,340 Problem is that sometimes will crash my FSX and FATAL ERROR will came up and when it doesn't appear the error my frames will go from 25FPS to 7/8FPS if PDF and ND are open. Any ideas/solutions will be much appreciate. Thanks Link to comment Share on other sites More sharing options...
gardan 4 Posted March 11, 2015 Share Posted March 11, 2015 Hi For me is good with : [Window07] size_mm=750, 400 window_size=1 position=8 BACKGROUND_COLOR=0,0,0 VISIBLE=0 ident=PFD gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Displays!PFD, 1,30,340,340 gauge01=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/ND/AB_ND_GDI!AB_ND_Gauge, 400,30,340,340 [Window08] size_mm=900, 1210 window_size=1 position=8 BACKGROUND_COLOR=0,0,0 VISIBLE=0 ident=ECAM gauge00=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAMU,320,10,560,560 gauge01=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/AB_Systems!attitude_backup, 0, 300, 188, 200 gauge02=../SimObjects/Airplanes/Aerosoft Airbus A318_A319 Base/Panel_Fallback/Airbus_ECAMD2D!AB_ECAML,320,650,560,560 and the // for erase lines Michel Link to comment Share on other sites More sharing options...
Aviator1111 6 Posted March 12, 2015 Share Posted March 12, 2015 Hey Michel! How do you fix those displays into their position? I mean how do you make FSX set those displays to their place in your frame? I guess you use a second monitor for the PFD, ND and ECAMs. But regardless for being in windowed or full screen, FSX always puts instrument views onto the main screen (where you can see the outside environment) as a not movable display. You have to undock it (so you have to be in windowed mode) and drag it to its final position. That's how I do. How do you do? Am I wrong, or am I missing of some experience? Thanks for your help! Regards, Adam Link to comment Share on other sites More sharing options...
rubencorreia 0 Posted March 27, 2015 Share Posted March 27, 2015 Hi thanks for your answers. I am doing same as you but I am getting fatal crash with the ND when I have any information on VOR I need to switch that option off and then it works fine. Otherwise will kill my fps going down to 0.5fps and then I got a fatal error. It has been a nightmare to get all this working fine for me lol Link to comment Share on other sites More sharing options...
Aviator1111 6 Posted April 20, 2015 Share Posted April 20, 2015 Same here! Try commenting out only the ND gauge, that is the no.1 FPS killer. Your fatal errors will have to be gone. If your FPS drops down to 0.5 close the undocked ND window then open it again, then you'll have your original FPS again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.