jrezende 0 Posted April 17, 2015 Share Posted April 17, 2015 Hi Oliver Can you check, please, double gates at LPPR 2014. I was post a topic with photos! Regards Rezende Link to comment Share on other sites More sharing options...
LCLK 24 Posted April 18, 2015 Share Posted April 18, 2015 I got a problem at SBRJ. Jetways not moving.. Fixed Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 22, 2015 Author Developer Share Posted April 22, 2015 Hi Oliver Can you check, please, double gates at LPPR 2014. I was post a topic with photos! Regards Rezende I can not reproduce this issue, take care that you have the newest version of the scenery and AES 2.38 installed. And check in AESHelp that the new "TropicalSim Porto 2014" Entry is activ, not the old one. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted April 22, 2015 Author Developer Share Posted April 22, 2015 Add a small fix for Flytampa Vienna in FSX, if the 2.60 Installer verison of the scenery is used: http://forum.aerosoft.com/index.php?/topic/92765-aes-238-is-available-now/#entry661535 Link to comment Share on other sites More sharing options...
jrezende 0 Posted April 22, 2015 Share Posted April 22, 2015 I can not reproduce this issue, take care that you have the newest version of the scenery and AES 2.38 installed. And check in AESHelp that the new "TropicalSim Porto 2014" Entry is activ, not the old one. Hi Oliver Thanks for answering Attached image of my AESHelp FSX I hope the image below answer your questions. Thank you. Link to comment Share on other sites More sharing options...
KLM737 128 Posted June 5, 2015 Share Posted June 5, 2015 3 months since the last version. Any news on an ETA for v2.39? Thanks. Link to comment Share on other sites More sharing options...
X_Man 3 Posted June 12, 2015 Share Posted June 12, 2015 Do you have to download all the patches or has 2.38 base been updated with the mentioned fixes? Link to comment Share on other sites More sharing options...
Luke160388 29 Posted June 23, 2015 Share Posted June 23, 2015 2015-04-22: Fix for Flytampa Vienna Version 2.6 in FSX only: Flytampa has updated there installer to Version 2.6 in FSX (FS9 not effected), so maybe AES 2.38 will not see the airport as installed, when the Version 2.6 is installed instead of 2.5 In this case unzip the file below to the <FS>\Aerosoft\AES\AIRPORT Folder and replace the file there, then start AEShelp again. AES Fix for LOWW 260.zip v2.6? I cannot find any update from v2.5. That is the latest update on the FT forum is v2.5 Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted June 23, 2015 Share Posted June 23, 2015 v2.6? I cannot find any update from v2.5. There will soon be one released. Link to comment Share on other sites More sharing options...
Peter Lund 7 Posted June 24, 2015 Share Posted June 24, 2015 Just received an email from Simmarket that V2.6 is available for download. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted July 3, 2015 Author Developer Share Posted July 3, 2015 Please read the red statement first post and keep the topic free from any discussions. Link to comment Share on other sites More sharing options...
mbskagen 0 Posted July 18, 2015 Share Posted July 18, 2015 AES Fix for LOWW 260.zipHiWhere have the fix for Fly Tampa Vienna 2.6 gone ? Link to comment Share on other sites More sharing options...
cgentil 163 Posted July 19, 2015 Share Posted July 19, 2015 Please reupload LOWW fix. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted July 19, 2015 Author Developer Share Posted July 19, 2015 Please reupload LOWW fix.Have update the first page and add a bundle File including all fixes needed for AES 2.38http://forum.aerosoft.com/index.php?/topic/92765-aes-238-is-available-now/ Link to comment Share on other sites More sharing options...
Condor184 101 Posted July 19, 2015 Share Posted July 19, 2015 Guten Morgen , oliver , ich war etwas enttäuscht von dem Informationfluss bzgl AES Entwcklung mit der Hoffnug auf eine neue version in diesem Monat gehts mir wieder besser  ich möchte diesen Threat  nicht unübersichtlich machen ,  aber ich als Sizilianer hoffe , dass unter den neuen Airports in 2.39 auch die super umgesetzt Payware von Catania LICc  dabei ist danke! Link to comment Share on other sites More sharing options...
cgentil 163 Posted July 20, 2015 Share Posted July 20, 2015 Have update the first page and add a bundle File including all fixes needed for AES 2.38http://forum.aerosoft.com/index.php?/topic/92765-aes-238-is-available-now/Danke! Link to comment Share on other sites More sharing options...
wizzy61 0 Posted July 27, 2015 Share Posted July 27, 2015 Hi,I have just bought FlyTampa Copenhagen X (EKCH) and updated to AES ver. 2.38.Unfortunately I have double jetways.Is it a FlyTampa or AES problem, are there anything I can do about it? Please login to display this image. Link to comment Share on other sites More sharing options...
wizzy61 0 Posted July 28, 2015 Share Posted July 28, 2015 Hi again,no need for advice, I don't have double jetway anymore I did a reinstallation of Copenhagen airport and noticed there was a check mark for "Download & Install Vistamare", which I unchecked. I got double jetways because I already had AES installed. Link to comment Share on other sites More sharing options...
wizzy61 0 Posted July 28, 2015 Share Posted July 28, 2015 Arghhhhh...... I've got double jetways again First the jetways didn't worked and I opened AESHELP 2.38 and pressed "Resync/Repair" . Now the jetways was ok but they was doubled again.Now I wonder what to do? Please login to display this image. Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted July 28, 2015 Share Posted July 28, 2015 Check in the forum: http://forum.aerosoft.com/index.php?/topic/93131-dual-jetways-at-ekch-after-installing-aes238/#comment-664414 Link to comment Share on other sites More sharing options...
wizzy61 0 Posted July 28, 2015 Share Posted July 28, 2015 Thanks Rafal, for the link to "Dual jetways at EKCH", but it don't seem to help me First, I don't have the flyTampa Scenery Configurator which I can't download because of a dead download link at FlyTampas website.But as I said, I could uncheck "Download & Install Vistamare" when I reinstalled the airport, - and the double jetways was gone.First when I Resync/Repair the EKCH airport in AES, the double jetways went back.According to Airports supported by AES 2.38 it shows support for Flytampa Copenhagen X 2014 with 3 Credits, but inside AESHELP it only shows "off-EKCH FlyTampa Copenhagen X as 3 DEMO. Also I works as a DEMO and desappear in EKCH after a while, - does it mean that the Flytampa Copenhagen X is not available for AES?I still wonder how I can get rid of the double jetways  But maybe it is not important as long as FlyTampa only appears in AES as a DEMO version. Link to comment Share on other sites More sharing options...
Christiaan 3 Posted July 28, 2015 Share Posted July 28, 2015 Recently downloaded the FSX FlyTampa Vienna 2.6 up-date from Aerosoft, today I updated the AES to the latest 2.38 version.Also downloaded the Fix Bundle, do I place the contents in both FS9 & FSX or is the bundle for FSX only. Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted July 28, 2015 Share Posted July 28, 2015 I don't have the flyTampa Scenery Configurator which I can't download because of a dead download link at FlyTampas websitewizzy61,The link at FlyTampa is working - I have just checked it for you: http://www.flytampa.org/downloads.htmlIf you can't download it, just please use another browser or turn off your antivirus. Link to comment Share on other sites More sharing options...
wizzy61 0 Posted July 29, 2015 Share Posted July 29, 2015 Thank you very much, now everything with the Fly Tampa download and AES is solved It was the AVAST which blocked for the download. After disabling AVAST I’ve got the Scenery Configurator. Also I got rid of the doublicated jetways after I started the Scenery Configurator and chosed my settings.The reason I could not activate the airport in AESHELP was I only had 2 credits left. After buying new credits and activation, the EKCH airport changed from off to Full and AES now seem to work right. Thanks again guys  Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted July 29, 2015 Share Posted July 29, 2015 Great to hear. Please login to display this image. Enjoy flying to Copenhagen! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.