Jump to content

Saitek Multi Panel - LED Display geht nicht


Pminden

Recommended Posts

Hallo zusammen,

ich habe mir vor kurzem das Saitek Multi Panel zugelegt und anschliessend installiert. Es funktioniert auch alles tadellos, nur das LED Display zeigt keine Reaktion, man sieht nur ein rotes Schimmern. Headind, Höhe, usw. werden lediglich im Flugzeug selbst angezeigt, nicht aber im LED Display.

Voran kann das liesgen ? Wäre toll wenn mir jemand helfen könnte! :)

Mfg,

Jos

Link to comment
Share on other sites

Hi,

etwas mehr Infos wären gut :-)

- Nutzt Du Xsaitekpanels?

- Hast Du die Saitek-Treiber installiert?

- Um welches Flugzeug handelt es sich?

- Battery und Avionics On?

Link to comment
Share on other sites

Soviel ich weiß, ist das ein Windows Problem.

Bei mir lief es testweise gut unter Win 7.

Unter Win 8 leider nicht mehr.

Das sollte mit den USB Ports unter Win 8 zu tun haben...

Ich habe aber ehrlich gesagt noch nicht herausgefunden, woran es genau liegt. Bei einigen Usern funktioniert es auch....

Könnte mit den Energiespar Modus unter Windows für die USB Ports zu tun haben....

Ansonsten stimme ich jimbim bei...

Gruß Heinz

Link to comment
Share on other sites

..Bin zwar nicht der X-Plane flieger, aber aufgrund mancher Hardware kann die Stromversorung USB nicht reichen, bei mir hatte das Saitek-Instrument Panel zu ungenügender Stromversorgung durch USB geführt.

USB-HUB mit eigener Stromversorgung (Netzteil) gekauft, alles Prima.

Link to comment
Share on other sites

@ Heinz, das von Dir beschriebene Problem sollte nur mit Win 8.1 auftreten...

Bei mir läuft Win8 "out of the box" ohne Probleme mit mit den Saitek panels.

Sollte es Probleme mit Win 8.1 geben, hat Sparker (Entwickler von Xsaitekpanels) einen Lösungsvorschlag auf der .org gepostet:

Windows 8.1 users need to be aware there is a change from 8.0 to 8.1 in how USB is handled and it breaks part of Xsaitekpanels. Some of my users have had success following the info in this link because it appears like Windows 8.1 thinks all computers are mobile devices even though they may not be.

http://support.microsoft.com/kb/2900614

It would be nice if there was some other way to reset the registry entries but at the moment that does not appear to be true.

Quelle: http://forums.x-plane.org/index.php?app=downloads&showfile=14646

Viele Grüße,

Sebastian

Link to comment
Share on other sites

Hallo Sebastian,

ja, richtig. Ist Windows 8.1.

Allerdings funktionierte es bei mir auch mit einem stromführenden USB Hub nicht.

Ich werde es bei Gelegenheit nocheinmal testen....

Gruß Heinz

Link to comment
Share on other sites

  • 4 weeks later...

Hallo zusammen,

aufgrund meiner Probleme mit den Panels und der Rückkehr zu Windows 7 x64 kann ich dazu folgendes Beitragen. In der CRJ habe ich auf dem LED Display auch nur ein leichtes Schimmern. Unter Windows 8.1 funktionierte bei mir nur das Switch Panel vernünftig. Radio Panel klappt jetzt in auch in der CRJ. Verwende ich die Default Cessna mit der xsaitekpanels.ini im xsaitekpanels Ordner zeigen alle Panels das gewünschte Verhalten. Scheint also als wenn es Flugzeug abhängig ist...

Stelle dann direkt auch noch eine Frage. Gestern wollte der Autopilot in der CRJ aber nicht so wie ich will (10.30RC2). Ob der an oder aus war egal und FMS hat auch nicht die Route abgeflogen. Vermute das hat nix mit den Panels zu tun - oder? Sorry ja eigentlich off Topic...

Werde heute noch mit anderen Flugzeugen 757/777 experementieren, dann kann ich da vielleicht noch was zum Multi Panel beitragen...

Gruß Martin

Link to comment
Share on other sites

So, ich habe noch mal bisschen probiert. Bei der CRJ klappt jetzt auch alles. Am multipanel vielleicht einfach mal am Knopf drehen und schon waren Alt und VS sowie die Zahlen im Display zu sehen. Kann auch mal einfach sein...

Schönes Wochenende

P.S. Übrigens benutze ich die mitgelieferten xsaitekpanes.ini Dateien aus dem Add on Aircarft Ordner der mitkommt. Ich habe nur den Schaltknopf für die Engines deaktiviert. Das mache ich dann doch mit der Maus...

Link to comment
Share on other sites

  • 5 weeks later...

Ich habe da auch mal eine Frage zu den Saitek-Panel. Ich habe im Gebrauch, dass Switch-, Multi- und Radiopanel. Ich benutze Windows 7 64bit mit Xsaitekpanels. Ich fliege im Augenblick mit der Carenado - B200 King Air. Das das Multipanel erst richtig funktioniert, wenn man die Regler bedient, habe ich schon herausgefunden.Aber der Autopilot z.B. funktioniert überhaupt nicht richtig. Wenn ihn anschalte, um z.B. die Höhe ein zu stellen, dann reagiert das Flugzeug nicht, und die Kontrolleuchte auf dem Saitekpanel geht gleich wieder aus. So oder ähnlich verhält es sich bei allen Befehlen, die ich eingeben möchte. Ganz schlimm reagieren die Flapseinstellungen, wenn ich den Hebel nach unten bewege, dann geht Flaps auf full und hört gar nicht mehr auf, sich zu verstellen. Alles läuft schlecht. Was kann ich da unternehmen? Ich komme aus der FSX / P3D Fraktion und da läuft es natürlich. Ich würde ungern auf die Hardware verzichten müssen. Danke im voraus.

Link to comment
Share on other sites

Hi Campino,

ich nutze die Saitek-panels auch mit der Carenado - B200 King Air und habe eigentlich überhaupt keine Probleme. Ich nutze die default xsaitekpanels.ini und nicht die Add_On_Aircraft_ini.

Nach dem Starten der Engines gehe ich wie folgt vor:

Im Flugzeug:

1. YAW Damper aktivieren

2. Rudderboost aktivieren

An den Saitek panels:

1. HDG der Runway eindrehen

2. Initial Climb ALT eindrehen z.B. 5000ft

3. Gewünschten V/S eindrehen z.B. 1200 ft/min

4. HDG-Taste drücken

5. V/S-Taste drücken

6. ALT-Taste drücken

Nun ist der Autopilot für den Start vorbereitet. Jetzt noch einmal die Flaps betätigen, zur Runway rollen und Starten.

Nach dem Start das Flugzeug stabilisieren und dann mittels der "AP"-Taste den Autopiloten aktivieren.

Nun sollte die AP-, HDG- und V/S-Tasten permanent leuchten. ALT sollte blinken. Die B200 sollte dann mit 1200ft/min steigen bis 5000ft erreicht sind. Ist dies geschehen, sollte die V/S-Taste ausgehen und die ALT-Taste permanent leuchten.

Einfach mal in dieser Reihenfolge ausprobieren :-p

Viele Grüße,

Sebastian

Link to comment
Share on other sites

Hi Campino,

ich nutze die Saitek-panels auch mit der Carenado - B200 King Air und habe eigentlich überhaupt keine Probleme. Ich nutze die default xsaitekpanels.ini und nicht die Add_On_Aircraft_ini.

Nach dem Starten der Engines gehe ich wie folgt vor:

Im Flugzeug:

1. YAW Damper aktivieren

2. Rudderboost aktivieren

An den Saitek panels:

1. HDG der Runway eindrehen

2. Initial Climb ALT eindrehen z.B. 5000ft

3. Gewünschten V/S eindrehen z.B. 1200 ft/min

4. HDG-Taste drücken

5. V/S-Taste drücken

6. ALT-Taste drücken

Nun ist der Autopilot für den Start vorbereitet. Jetzt noch einmal die Flaps betätigen, zur Runway rollen und Starten.

Nach dem Start das Flugzeug stabilisieren und dann mittels der "AP"-Taste den Autopiloten aktivieren.

Nun sollte die AP-, HDG- und V/S-Tasten permanent leuchten. ALT sollte blinken. Die B200 sollte dann mit 1200ft/min steigen bis 5000ft erreicht sind. Ist dies geschehen, sollte die V/S-Taste ausgehen und die ALT-Taste permanent leuchten.

Einfach mal in dieser Reihenfolge ausprobieren :-p

Viele Grüße,

Sebastian

Danke, werde es mal so testen.

Link to comment
Share on other sites

Das ist wirklich seltsam...

Ich habe an der ini Datei nichts verändert... Es ist einfach die ganz normale die sich nach dem Entpacken in dem Xsaitekpanels Verzeichnis befindet...

Aber ich habe sie noch mal hier angehängt...

xsaitekpanels.zip

Link to comment
Share on other sites

Das ist wirklich seltsam...

Ich habe an der ini Datei nichts verändert... Es ist einfach die ganz normale die sich nach dem Entpacken in dem Xsaitekpanels Verzeichnis befindet...

Aber ich habe sie noch mal hier angehängt...

attachicon.gifxsaitekpanels.zip

Danke, mal sehen was geht. Ansonsten weiß ich auch nicht weiter.

Link to comment
Share on other sites

Hmmm,

leider gehen mir auch die Ideen aus... kannst Du mal Deine X-Plane Log-Datei hier anhängen? Dann kann ich mir mal anschauen ob man dort etwas sieht...

Link to comment
Share on other sites

Hier die Logdatei

log.txt for X-Plane 10.31r1 (64-bit build 103100) compiled on Oct 18 2014 12:47:06
This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.
Windows 6.1 (build 7601/2) Service Pack 1
This is a 64-bit version of Windows.
CPU type: 8664
Physical Memory (total for computer): 17138171904
Maximum Virtual Memory (for X-Plane only): 8796092891136
CPU 0: Intel® Core i5-3570K CPU @ 3.40GHz Speed (mhz): 3403
CPU 0: Intel® Core i5-3570K CPU @ 3.40GHz Speed (mhz): 3403
CPU 0: Intel® Core i5-3570K CPU @ 3.40GHz Speed (mhz): 3403
CPU 0: Intel® Core i5-3570K CPU @ 3.40GHz Speed (mhz): 3403
X-System folder:'F:\X-Plane 10/', case sensitive=0
WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle
OpenGL Vendor : NVIDIA Corporation
OpenGL Render : GeForce GTX 970/PCIe/SSE2
OpenGL Version : 4.4.0 NVIDIA 344.24 (440/0)
OpenGL Extensions: GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_AMD_vertex_shader_viewport_index GL_AMD_vertex_shader_layer GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_query_buffer_object GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_post_depth_coverage GL_EXT_provoking_vertex GL_EXT_raster_multisample GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_formatted GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_sparse_texture2 GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_filter_minmax GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_debug GL_KTX_buffer_region GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_equation_advanced_coherent GL_NV_blend_square GL_NV_compute_program5 GL_NV_conditional_render GL_NV_conservative_raster GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_fill_rectangle GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_coverage_to_color GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_fragment_shader_interlock GL_NV_framebuffer_mixed_samples GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_geometry_shader_passthrough GL_NV_gpu_program4 GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_path_rendering_shared_edge GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_sample_locations GL_NV_sample_mask_override_coverage GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_atomic_fp16_vector GL_NV_shader_atomic_int64 GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NV_viewport_array2 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control
threaded_avail : 1 dis_fog_avail : 1 instance_avail : 1 pbo_avail : 1
aniso_avail : 1 gshader_avail : 1 buniform_avail : 1 shad_lod_avail : 1
gpu_shad4_avail : 1 framebuf_avail : 1 frameblit_avail : 1 drawbuf2_avail : 1
tex_float_avail : 1 packed_stencil : 1 texture_rg : 1 framebuffer_srgb : 1
copy_buf_avail : 1 pinned_avail : 0 timer_avail : 1 sync/fence : 1
max tex units : 32 (32/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size : 189.875000
idx in vram : 1
GLSL Version :4.40 NVIDIA via Cg compiler/440
first-gen shaders: 0
(16/4096/124/192/32/2048/2048)
This video card is: DX10 or 11 - With instancing
CPU count : 4
OpenAL loaded: Resources/dlls/64/openal32.dll
OpenAL devices: OpenAL Soft
Open AL default device:OpenAL Soft
OpenAL vendor : OpenAL Community
OpenAL renderer : OpenAL Soft
OpenAL version : 1.1
OpenAL hardware : OpenAL Soft
OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFT_loopback AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFTX_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points
Fetching plugins for F:\X-Plane 10/Resources/plugins
Loaded: F:\X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).
F:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: F:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl. (This file is missing, not a DLL or could not be loaded due to another missing DLL.)
F:\X-Plane 10/Resources/plugins/SerialFP2_XPLM.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: F:\X-Plane 10/Resources/plugins/SerialFP2_XPLM.xpl. (This file is missing, not a DLL or could not be loaded due to another missing DLL.)
Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch 1 Radio 1 Multi 0 BIP Panels
Loaded: F:\X-Plane 10/Resources/plugins/win.xpl (saitekpanels.hardware uses hidapi interface).
Airport-Navigator v1.3.1 [iNFO]: XPluginStart
Airport-Navigator v1.3.1 [iNFO]: AptNav::pluginStart
Airport-Navigator v1.3.1 [iNFO]: loading X-Plane apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Resources\default scenery\default apt dat\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading custom sceneries ...
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\-----HD Deutschland-----\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\-----HD Schweiz-----\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\-----HD Spanien-----\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EBBR Brussels\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDDF Frankfurt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDDK Cologne\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDDM Munich\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDDS Stuttgart\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDDT Berlin Tegel\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EDLP Paderborn-Lippstadt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EGBB Birmingham\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EGKK London-Gatwick\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EGLL Heathrow\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EGPF Glasgow\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EGSS London-Stansted\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - EIDW Dublin\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LEBL Barcelona\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LEMD Madrid\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LFMN Nice Cote d Azur X\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LFPG Paris CDG\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LFPO Paris Orly\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LPFR Faro\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Aerosoft - LSGG Genf\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\APT GCHI\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\bremen-latest\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\EDDM_3_3\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\EDDW_Bremen\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Europe_Library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\ff_library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Global Airports\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\KORS - Ortho - Orcas Island Airport\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\KSEA Demo Area\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\KSEA Demo Terrain\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\LOWI Demo Area\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\LOWI Innsbruck Kranebitten 1.02\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\Mallorca_8.6.9beta\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\OpenSceneryX\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\R2_Library\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\README.txt\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\scenery_packs.ini\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\w2xp_D+A+CH_beta5.1-hd\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\w2xp_Spain_beta5.1-sd\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\w2xp_Switzerland_beta5.1-sd\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\world-models-master\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z El Hierro\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+53+007_D_Emden_bx16\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+53+008_D_Bremen_bx17\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+53+009_D_Hamburg_bx16\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+54+007_D_Helgoland_bx16\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+54+008_D_Sylt_bx16\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+54+011_D_Fehmarn_bx16\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z+54+013_D_Ruegen_bx17\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\ZZZ GCHI\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\zzz_hd_global_scenery2\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\zzz_new_zealand\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\zzz_new_zealand_overlay\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\zzz_Treelines_Farms_Europe_v2\Earth nav data\apt.dat
Airport-Navigator v1.3.1 [iNFO]: loading F:\X-Plane 10\Custom Scenery\z_El_Hierro_1.1\Earth nav data\apt.dat
Loaded: F:\X-Plane 10/Resources/plugins/Airport-Navigator/64/win.xpl (ansorg.xplane.aptnav).
DiscreetFPS 1.3.3
Loaded: F:\X-Plane 10/Resources/plugins/DiscreetFPS/64/win.xpl (discreet_fps.plugin).
FlyWithLua: Your system path is F:\X-Plane 10\
FlyWithLua: Plugin Dir: F:\X-Plane 10\Resources\plugins\FlyWithLua
FlyWithLua: Plugin Scripts Dir: F:\X-Plane 10\Resources\plugins\FlyWithLua\Scripts
Loaded: F:\X-Plane 10/Resources/plugins/FlyWithLua/64/win.xpl (CarstenLynker.FlyWithLua).
Gizmo64: v14.01.16.0253 Win (JIT) 64-bit Starting up...
built: Jan 16 2014, 03:55:43
Gizmo64: X-Plane Folder: (F:/X-Plane 10/)
Gizmo64: Loading..
Gizmo64: XPluginStart() complete.
Loaded: F:\X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl (gizmo.x-plugins.com).
F:\X-Plane 10/Resources/plugins/PythonInterface/64/win.xpl : Error Code = 126 : Das angegebene Modul wurde nicht gefunden.
F:\X-Plane 10/Resources/plugins/PythonInterface/win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
F:\X-Plane 10/Resources/plugins/SeaTraffic/win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Loaded: F:\X-Plane 10/Resources/plugins/SilverLining/64/win.xpl (SilverLining.Clouds).
Loaded: F:\X-Plane 10/Resources/plugins/XPUIPC/64/win.xpl (XPUIPC/XPWideFS.).
Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch 1 Radio 1 Multi 0 BIP Panels
XPluginStop has been called
Warning: F:\X-Plane 10/Resources/plugins/Xsaitekpanels/64/win.xpl Signature: saitekpanels.hardware uses hidapi interface. (A version of this plugin is already loaded.)
F:\X-Plane 10/Resources/plugins/Xsaitekpanels/win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Airport-Navigator v1.3.1 [iNFO]: AptNav::pluginEnable
Airport-Navigator v1.3.1 [iNFO]: loading hotkey CENTER
Airport-Navigator v1.3.1 [iNFO]: loading hotkey ENABLE
Airport-Navigator v1.3.1 [iNFO]: loading hotkey ZOOM_RESET
Airport-Navigator v1.3.1 [iNFO]: loading hotkey ZOOM_IN
Airport-Navigator v1.3.1 [iNFO]: loading hotkey ZOOM_OUT
Airport-Navigator v1.3.1 [iNFO]: loading hotkey DOWN
Airport-Navigator v1.3.1 [iNFO]: loading hotkey UP
Airport-Navigator v1.3.1 [iNFO]: loading hotkey LEFT
Airport-Navigator v1.3.1 [iNFO]: loading hotkey RIGHT
Airport-Navigator v1.3.1 [iNFO]: loading hotkey TOGGLE_COMMWIN
DiscreetFPS: enabled
SkyMaxx Pro: SilverLining initialized OK.
==== CHANGING LANGUAGE TO: Deutsch. ====
ERROR: language file line 'radial: ====Radial:' does not have the same trailing spaces.
ERROR: language file line 'distance: ====Entfernung:' does not have the same trailing spaces.
ERROR: language file line 'ELLIPSE====' missing right side translation.
ERROR: language file line 'Enter the arm and maximum weight of the passengers and cargo that you expect to carry here.====' missing right side translation.
ERROR: language file line 'Then go to the next tab over to see the range of weight and balance you could encounter in flight!====' missing right side translation.
ERROR: language file line 'NOTE: THIS IS ONLY FOR WEIGHT AND BALANCE INVESTIGATION FOR YOU, AND DOES NOT AFFECT X-PLANE IN ANY WAY!====' missing right side translation.
ERROR: language file line 'Each red dot is a possible loading configuration. See here what range of weight and CG you could see in flight!====' missing right side translation.
ERROR: language file line 'Enter weights below to see the weight and CG for that load.====' missing right side translation.
ERROR: language file line 'cg|-at current test====' missing right side translation.
ERROR: language file line 'weight|-at current test====' missing right side translation.
ERROR: language file line 'fwd limit====' missing right side translation.
ERROR: language file line '|aft limit====' missing right side translation.
ERROR: language file line 'wgt min====' missing right side translation.
ERROR: language file line '|wgt max====' missing right side translation.
ERROR: language file line '-steers with gear | { Check this to let the light steer with the landing gear steering!====' missing right side translation.
ERROR: language file line '-aoa|====' missing right side translation.
ERROR: language file line 'Spoolup/Boost====' missing right side translation.
ERROR: language file line '|has verbal 500 AGL callout { ====' missing right side translation.
ERROR: language file line 'ang{ This is the angle of the lowest value we can display. You can wrap from 0 to 720 for 2 rotations, or 0 to NEGATIVE 360 to go backwards once, for example! Enter any angles you like, even negative ones, and even values well greater than 360. Zero is obviously the top of the instrument.====' missing right side translation.
ERROR: language file line 'RAM-inlet pressure recovery|(fraction) { This is the percentage of the RAM air pressure that your inlet manages to recover to increase engine power.====' missing right side translation.
ERROR: language file line 'prop mass ratio|(to solid aluminum) { This is how heavy the prop or rotor is compared to one made of pure aluminum. Composite props, for example, are lighter. Heavier props speed up and slow down more slowly, and provide more auto-rotation ability in helicopters.====' missing right side translation.
ERROR: language file line 'minimum prop governor RPM|(engine RPM) { If you pull the prop control back, you can lower the engine RPM to this setting. This does NOT include reverse or beta or feathered... enter the prop pitches for those things over to the left, and whatever rpm you get as a result, you get.====' missing right side translation.
ERROR: language file line 'max efficient inlet Mach|(Mach) { This is the maximum mach number at which the inlet can pass air to the engine efficiently. Above this mach number, losses in shock waves around the inlet will reduce engine efficiency.====' missing right side translation.
ERROR: language file line 'fan RPM at 100% N1|(rpm)====' missing right side translation.
ERROR: language file line '{ The prop direction will indicate which way the engine torques the craft under power. For jets, this is the compressor rotation direction.====' missing right side translation.
ERROR: language file line 'electric engine drive efficiency|(ratio) { If you have an electric engine, this percentage of the power coming from the battery that will make it to the prop.====' missing right side translation.
ERROR: language file line 'electric engine re-gen efficiency|(ratio) { If you have an electric engine with re-gen braking, enter the efficiency of that re-gen braking here, and this percentage of the power going into the prop (if any) will be loaded into the battery.====' missing right side translation.
ERROR: language file line '|CWS button adjusts altitude hold { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hold the CWS button while flying up or down in altitude mode to change the altitude selection.====' missing right side translation.
ERROR: language file line '|auto-load speed into pre-sel when ASI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line '|auto-load VVI into pre-sel when VVI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt decision-height callout|{ If you enter a decision-height into a radio altimeter in the cockpit, you will get a callout when you get to or near that altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt callout advance|(ft) { SOME radio altimeters give the decision-height callout in ADVANCE of the decision-height to give you some warning. Enter that advance, in feet, here.====Radarhöhenmesser-Warnung im Voraus|(Fuß) { Manche Radarhöhenmesser rufen die Entscheidungshöhe vor dem Erreichen der Höhe aus, sozusagen als Vorwarnung. Geben Sie diese Höhendifferenz hier in Fuß ein. ' does not have the same trailing spaces.
ERROR: language file line 'TOP check to trigger MASTER CAUTION. BOTTOM check to trigger MASTER WARNING. SELECTOR for WAV FILE to play in the your aircraft's SOUNDS/CUSTOM folder.====' missing right side translation.
ERROR: language file line 'Each bus may be driven by any number of generators and batteries.====' missing right side translation.
ERROR: language file line 'If you have more buses than generators or batteries, then you will need the cross-tie always on!====' missing right side translation.
ERROR: language file line ' goes to bus #====' missing right side translation.
ERROR: language file line 'max MP|(max POWER, redline RPM, sea level, ISA)====' missing right side translation.
ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====' missing right side translation.
ERROR: language file line '#====#' missing right side translation.
ERROR: language file line ' { You may, optionally, assign a dataref for a switch in the sim to drive the slider, rather than having it driven by the but_command_slider switch. NOTE: YOU SHOULD PROBABLY START ASSIGNMENTS FROM #24 AND WORK DOWN, SINCE THE PRESENCE OF BUT_COMMAND_SLIDER BUTTONS ON THE PANEL WILL START AT THE FIRST SLIDER AND WORK UP!====' missing right side translation.
ERROR: language file line 'ELEMENT SPECS (ROOT AT LEFT, TIP AT RIGHT)====' missing right side translation.
ERROR: language file line 'shadow mode | { Controls which views this object casts shadows in. You may be able to improve framerate by limiting which objects cast shadows. For example, in an airliner with small windows there is probably no need to have the cabin seat objects cast shadows in an exterior view.====' missing right side translation.
ERROR: language file line '| hi-res { Check this to use higher texture resolution on this object. This is only recommended for objects that make up the cockpit instrument panel so the instruments are sharp!====' missing right side translation.
ERROR: language file line '| pre-fill { Check this to cause X-Plane to exclude clouds behind this object. Inside the 3-d cockpit blocking out clouds can significantly improve framerate. Only do this with fully opaque, cheap-to-draw objects. If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation.
ERROR: language file line '| use LOD { Check this to honor the LOD attributes in the OBJ. By default X-Plane ignores LOD on airplanes and draws them from any distance. Enable this to use LOD. Using low LODs on tiny details of your plane improves framerate in the far view; X-Plane will simply stop drawing those details when the plane is far away.====' missing right side translation.
ERROR: language file line 'roll input to engage|(ratio)====' missing right side translation.
ERROR: language file line 'aileron trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'elevator trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rudder trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rotor trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line '|aileron trim tab adjust { 0 is centered, -1.0 is for full left aileron, +1.0 is for right aileron.====' missing right side translation.
ERROR: language file line '|elevator trim tab adjust { 0 is centered, -1.0 is for full down elevator, +1.0 is for full up elvator.====' missing right side translation.
ERROR: language file line '|rudder trim tab adjust { 0 is centered, -1.0 is for full left rudder, +1.0 is for right rudder.====' missing right side translation.
ERROR: language file line ' minimum rudder deflection time|seconds { Enter 0.0 to be able to deflect the controls as fast as the pilot can move the stick or the art stab system can command a deflection, as is the case with all manual control systems. If the plane has a hydraulic system and a max rate of control deflection, though, enter how long it takes to go from center to fully-deflected here.====Minimale Seitenruder-Auslenkzeit|Sekunden { Geben Sie 0.0 ein, wenn die Steuerflächen unmittelbar der Steuereingabe des Piloten oder des Stabilisierungssystems folgen soll, wie es bei manuellen Steuersystemen der Fall ist. Wenn das Flugzeug jedoch ein Hydrauliksystem mit einer maximalen Auslenkgeschwindigkeit besitzt, geben Sie die Zeit ein, die für die Fahrt von der Mittelstellung bis zur vollen Auslenkung benötigt wird.' does not have the same leading spaces.
ERROR: language file line '-gear castors| { Just check here if you want this gear to free-castor. Enter the steering values above if you want it to steer.====-Fahrwerklaufrollen { Gegen Sie die Steuerungswerte oben ein, wenn Sie wollen, das es steuert. ' does not have the same trailing spaces.
ERROR: language file line 'additional gear flatplate area|(square feet) { X-Plane already considers the frontal area of struts, tires, and doors in its landing gear drag estimates. BUT, in real airplanes, there is ADDITIONAL drag from the gear WELLS disrupting the airflow over the craft. Enter the effective flatplate area here associated with that drag to increase the drag associated with landing gear deployment. A Beech Baron, for example, might have 2 square feet of effective frontal area from this effect. ====Zusätzlicher Flächenwiderstand|(Fuß²) { X-Plane bezieht grundsätzlich die Frontalfläche von Fahrwerkbeinen, Reifen und Schachttüren in die Berechnung des Luftwiderstands schon mit ein. Aber die Fahrwerksschächte erzeugen in der Realität zusätzlichen Widerstand, da sie den Fluss stören. Hier können Sie die äquivalente Fläche eingeben, die den Widerstand auf entsprechende Weise wie die Schachtöffnung bei ausgefahrenem Fahrwerk erhöhen würde. Eine Beech Baron kann z.B. 2 Quadrat-Fuß äquivalente Frontalfläche haben, die auf diesen Effekt zurückgeht.' does not have the same trailing spaces.
ERROR: language file line 'deflection when under zero load|==== Auslenkung unter Nulllast' does not have the same leading spaces.
ERROR: language file line '-tank #====Tank Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Prop ====Propeller' does not have the same trailing spaces.
ERROR: language file line 'Misc Wing ====Diverse Flügel' does not have the same trailing spaces.
ERROR: language file line ' warhead type { Do you really need an explanation?====Sprengkopftyp { Brauchen Sie wirklich eine Erklärung?' does not have the same leading spaces.
ERROR: language file line 'coeff-20====' missing right side translation.
ERROR: language file line 'coeff-180====' missing right side translation.
ERROR: language file line 'finite-L/D====' missing right side translation.
ERROR: language file line 'AR|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'e|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'Departure ICAO should be blank when filing for a popup clearance.====' missing right side translation.
ERROR: language file line 'm====m' missing right side translation.
ERROR: language file line 'a multiplayer to plane #====einem® Mitspieler(in), Flugzeug Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Above ====Oberhalb von' does not have the same trailing spaces.
ERROR: language file line 'G-units. We will try to give you this G-load by moving the pitch controls ====G-Faktor. Dieser wird durch Bewegung des Höhenruders nachgeahmt' does not have the same trailing spaces.
ERROR: language file line ' ailn-elev-rudd====Quer-/Höhen-/Seitenruder' does not have the same leading spaces.
ERROR: language file line 'www.X-Plane.com for tech support contact info!==== Besuchen Sie bei Problemen www.X-Plane.com!' does not have the same leading spaces.
Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
0 Custom Scenery/Aerosoft - EDDT Berlin Tegel/
1 Custom Scenery/Aerosoft - EGBB Birmingham/
2 Custom Scenery/Aerosoft - EGKK London-Gatwick/
3 Custom Scenery/Aerosoft - EGLL Heathrow/
4 Custom Scenery/Aerosoft - EGPF Glasgow/
5 Custom Scenery/Aerosoft - EIDW Dublin/
6 Custom Scenery/z El Hierro/
7 Custom Scenery/APT GCHI/
8 Custom Scenery/KORS - Ortho - Orcas Island Airport/
9 Custom Scenery/EDDM_3_3/
10 Custom Scenery/EDDW_Bremen/
11 Custom Scenery/Mallorca_8.6.9beta/
12 Custom Scenery/LOWI Innsbruck Kranebitten 1.02/
13 Custom Scenery/Aerosoft - EBBR Brussels/
14 Custom Scenery/Aerosoft - EDDF Frankfurt/
15 Custom Scenery/Aerosoft - EDDK Cologne/
16 Custom Scenery/Aerosoft - EDDM Munich/
17 Custom Scenery/Aerosoft - EDDS Stuttgart/
18 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/
19 Custom Scenery/Aerosoft - EGSS London-Stansted/
20 Custom Scenery/Aerosoft - LEBL Barcelona/
21 Custom Scenery/Aerosoft - LEMD Madrid/
22 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/
23 Custom Scenery/Aerosoft - LFPG Paris CDG/
24 Custom Scenery/Aerosoft - LFPO Paris Orly/
25 Custom Scenery/Aerosoft - LPFR Faro/
26 Custom Scenery/Aerosoft - LSGG Genf/
27 Custom Scenery/zzz_Treelines_Farms_Europe_v2/
28 Custom Scenery/bremen-latest/ (disabled)
29 Custom Scenery/w2xp_D+A+CH_beta5.1-hd/
30 Custom Scenery/Europe_Library/
31 Custom Scenery/ff_library/
32 Custom Scenery/world-models-master/
33 Custom Scenery/R2_Library/
34 Custom Scenery/Global Airports/
35 Custom Scenery/KSEA Demo Area/
36 Custom Scenery/KSEA Demo Terrain/
37 Custom Scenery/LOWI Demo Area/
38 Custom Scenery/OpenSceneryX/
39 Custom Scenery/-----HD Deutschland-----/
40 Custom Scenery/z+54+013_D_Ruegen_bx17/
41 Custom Scenery/z+53+008_D_Bremen_bx17/
42 Custom Scenery/z+53+009_D_Hamburg_bx16/
43 Custom Scenery/z+54+008_D_Sylt_bx16/
44 Custom Scenery/z+54+011_D_Fehmarn_bx16/
45 Custom Scenery/z+54+007_D_Helgoland_bx16/
46 Custom Scenery/z+53+007_D_Emden_bx16/
47 Custom Scenery/-----HD Schweiz-----/
48 Custom Scenery/w2xp_Switzerland_beta5.1-sd/
49 Custom Scenery/-----HD Spanien-----/
50 Custom Scenery/w2xp_Spain_beta5.1-sd/
51 Custom Scenery/z_El_Hierro_1.1/
52 Custom Scenery/ZZZ GCHI/
53 Custom Scenery/zzz_new_zealand/
54 Custom Scenery/zzz_new_zealand_overlay/
55 Custom Scenery/zzz_hd_global_scenery2/
56 Global Scenery/Bug Fixes/
57 Global Scenery/Europe_Library/
58 Global Scenery/Extra Islands/
59 Global Scenery/Recuts 1030/
60 Global Scenery/X-Plane 10 Global Scenery/
61 Resources/default scenery/1000 autogen/
62 Resources/default scenery/1000 decals/
63 Resources/default scenery/1000 forests/
64 Resources/default scenery/1000 roads/
65 Resources/default scenery/1000 urban terrain/
66 Resources/default scenery/1000 world terrain/
67 Resources/default scenery/700 roads/
68 Resources/default scenery/900 beaches/
69 Resources/default scenery/900 europe objects/
70 Resources/default scenery/900 forests/
71 Resources/default scenery/900 roads/
72 Resources/default scenery/900 us objects/
73 Resources/default scenery/900 world object placeholders/
74 Resources/default scenery/airport decals/
75 Resources/default scenery/airport scenery/
76 Resources/default scenery/default apt dat/
77 Resources/default scenery/default atc/
78 Resources/default scenery/sim objects/
0:00:00.000 D/HID: HID Bridge Running
Fetching plugins for Custom Scenery/Mallorca_8.6.9beta/plugins
Loaded: Custom Scenery/Mallorca_8.6.9beta/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Mallorca_8.6.9beta).
GroundTraffic: Note: Ignoring duplicate waypoint at line 114
Could not find tile 51 name is ^u
Could not find tile 48 name is close-frame
(in sign '{@L}M{^u}{@Y}{^r}C' from airport ESSV)
Syntax error - missing closing brace.
(in sign '{@L}A{^r]' from airport ESSV)
Syntax error - unknown glyph (
Syntax error - unknown glyph @
Syntax error - unknown glyph )
(in sign '{@L}A(@R)13-31' from airport KBAZ)
Could not find tile 37 name is -
(in sign '{@L}A(@R)13-31' from airport KBAZ)
Syntax error - unknown glyph at ^ul}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@Y}{^l}A{@L}F{@Y}F{^ul}A{^r}' from airport KBGM)
Syntax error - unknown glyph at 10-28}
Parse error: no closing brace.
(in sign '{@L}P{@R}{10-28}' from airport KBGM)
Syntax error - unknown glyph at ^i}B{@L}A{@@}{@L}A
Syntax error - unknown glyph at B{@L}A{@@}{@L}A
Syntax error - unknown glyph at A{@@}{@L}A
Syntax error - unknown glyph at {@L}A
Syntax error - missing closing brace.
(in sign '{@Y}{^i}B{@L}A{@@}{@L}A' from airport KBUF)
Syntax error - unknown glyph p
(in sign '{@L}p{@@}{@L}P' from airport KBUF)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}A6{@L}A{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A5{@L}A{@Y}A6{@L}|{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{^ru}{@L}A{@Y}A4{^lu}{@L}|{@Y}32-14{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B{@L}A{@Y}TERM-B-FBO{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}A2{@L}A{@Y}N-FBO{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}N-FBO{@L}A{@Y}A-C{^u}{@L}|{@Y}A2{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}O-FBO{@L}A{@Y}A-A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}P-FBO{@L}A{@Y}A-A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B-TERM{@L}A{@Y}B{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{^ru}{@L}A{@Y}{^lu}G3-B3{@L}|{@Y}A4{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
(in sign '{@B}|{@Y}{^rd}A-FBO{@L}B{@Y}A{^lu}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^rd}F{@L}|{@Y}B2-G4{^l}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^r}F2{@L}|{@Y}B1{^l}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^ld}C{@L}|{@R}19-01{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}F2{@L}|{@Y}B1{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}F{@L}|{@Y}B2-G4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^lu}A-FBO{@L}|{@Y}A{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}B{@Y}{^l}B3-TERM{@L}|{@Y}B3-G3-A4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}FBO{@L}|{@Y}{^l}A-TERM-FBO{@L}A2{@Y}A{@L}|{@Y}32-14{^r}' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@L}C{@R}14-32{@L}|{@Y}A2(^u)' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}C{@R}14-32{@L}|{@Y}A2(^u)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}A2-FBO(^u)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}M{@R}19-01{@L}|{@Y}G(^r)' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}C{@Y}M{@R}19-01{@L}|{@Y}G(^r)' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph )
(in sign '{@L}C{@Y}F2-B{^r}19-01(^r)' from airport KFRG)
Could not find tile 37 name is -
(in sign '{@L}D{R}32-14{@Y}A-TERM-FBO{^r}' from airport KFRG)
Could not find tile 37 name is -
Could not find tile 37 name is -
Could not find tile 51 name is ^u
Could not find tile 48 name is close-frame
(in sign '{@L}D{Y}D1-D2-G{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}C-A2-FBO{@L}F{@Y}C-14-01{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}F{@Y}F1{^ru}{@L}|{@Y}C{^u}' from airport KFRG)
Syntax error - unknown glyph at ru}
Parse error: no closing brace.
(in sign '{@L}|{@Y}{^ld}B{@L}F{@Y}B-FBO-TERM{ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B{@L}F{@Y}B-FBO-TERM{ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{^ld}A4{@L}|{@Y}{^lu}A{^rd}{@L}G{@Y}G3-B3-TERM{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}B{@R}01-19{@Y}B{^ru}{@L}G{@Y}FBO-TERM{@L}|{@Y}19-01{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G{@L}G5{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G-5-6-7{@L}|{@Y}01-19{@L}G4{@Y}D{@L}|{@Y}32-14{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G4{^r}{@L}G{@Y}G-5-6-7{@L}|{@Y}01-19{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}B{@R}01-19{@Y}B{^rd}{@L}G{@Y}G4-5-6-7{@L}|{@Y}01-19{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G3-B3-TERM{@L}G{@Y}{^lu}B{^rd}{@L}|{@Y}A4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}G{@Y}G1-G2{@L}|{@Y}A{@L}|{@Y}14-32{@L}|{@Y}D{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G1{@L}19{@Y}T1{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G3-G-A4-A{@L}19{@Y}T2-TERM{^r}' from airport KFRG)
Syntax error - unknown glyph at {^rd}{@L}|{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at {@L}|{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at |{@Y}TERM-NEXT{^r}
Syntax error - unknown glyph at TERM-NEXT{^r}
Parse error: no closing brace.
(in sign '{@L}19{@Y}{^ru}B{^rd}{@L}|{@Y}FBO{{^rd}{@L}|{@Y}TERM-NEXT{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}19{@Y}{^ru}B{^rd}{@L}|{@Y}FBO{{^rd}{@L}|{@Y}TERM-NEXT{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B{^r}{@L}B2{@Y}F{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G4{@L}19{@Y}B2-F-C{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}M{@L}01{@Y}G7{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B2{@L}01{@Y}G4{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}A{@L}01{@Y}A{^rd}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B3{@L}01{@Y}G3{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}B4{@L}01{@Y}G1{^r}' from airport KFRG)
Could not find tile 49 name is ^l
(in sign '{@L}14{^l}D2' from airport KFRG)
Could not find tile 55 name is ^ld
Could not find tile 54 name is ^ru
Could not find tile 48 name is close-frame
(in sign '{@L}14{^ld}G{^ru}' from airport KFRG)
Could not find tile 55 name is ^ld
Could not find tile 54 name is ^ru
Could not find tile 48 name is close-frame
(in sign '{@L}14{^ld}B{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}G{@L}32{@Y}G{^ru}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A5{@L}32{@Y}D1{^r}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}N{@Y}{^l}A{^r}{@L}|{@Y}A2-C{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^ld}A{^ru}{@L}G3{@Y}{^l}G{^r}{@L}|{@Y}A4{^u}' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^l}G{@L}G4{@R}19-01' from airport KFRG)
Syntax error - unknown glyph at u}G4-5-6-7{@L}B2{@R}19-01
Syntax error - unknown glyph at G4-5-6-7{@L}B2{@R}19-01
Syntax error - unknown glyph at B2{@R}19-01
Syntax error - missing closing brace.
(in sign '{@L}|{@Y}{u}G4-5-6-7{@L}B2{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{u}G4-5-6-7{@L}B2{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}G-A4{@L}A{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^u}G3-A-A4{@L}B3{@R}19-01' from airport KFRG)
Could not find tile 48 name is close-frame
Could not find tile 47 name is open-frame
(in sign '{@L}|{@Y}{^lu}B3-G3-A-A4{@L}T2{@Y}{^l}B{^r}' from airport KFRG)
Syntax error - unknown glyph (
Syntax error - unknown glyph @
Syntax error - unknown glyph )
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}B4(@R)19-01{@Y}G1{^ul}' from airport KFRG)
Could not find tile 37 name is -
(in sign '{@L}B4(@R)19-01{@Y}G1{^ul}' from airport KFRG)
Syntax error - unknown glyph at @Y^rd}A2
Syntax error - missing closing brace.
(in sign '{@Y,^lu}A2{^ld}A3{@L}A{@Y^rd}A2' from airport KFTW)
Syntax error - unknown glyph at ^R}D{@L}D
Syntax error - unknown glyph at D{@L}D
Syntax error - missing closing brace.
(in sign '{@R}24-24{r1}{@Y}{@@}{^R}D{@L}D' from airport KGRB)
Syntax error - unknown glyph at ^R}JET
Syntax error - missing closing brace.
(in sign '{@Y}{^R}JET' from airport KGRB)
Syntax error - unknown glyph at ^ur}|D{^r}{@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at |D{^r}{@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at {@@}{^u}RAMP{@L}D1
Syntax error - unknown glyph at {^u}RAMP{@L}D1
Syntax error - unknown glyph at RAMP{@L}D1
Syntax error - missing closing brace.
(in sign '{@Y}{^l}D{@L}D1{@Y}D1{^u}|B{^ur}|D{^r}{@@}{^u}RAMP{@L}D1' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@Y}{^l}D3|D2{^ul}' from airport KGRB)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}M{@R}06-24{r1}{@Y}{@@}{^u}M{@L}M{@Y}D{^r}|J{^ur}' from airport KGRB)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}M{@R}06-24{r1}{@Y}{@@}{^u}M{@L}M{@Y}D{^r}|J{^ur}' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}D{@R}36-18{r1}{@Y}{@@}{^l}M{@L}D{@Y}D{^u}|J{^ul}' from airport KGRB)
Syntax error - unknown glyph at ^ul}
Parse error: no closing brace.
(in sign '{@L}D{@R}36-18{r1}{@Y}{@@}{^l}M{@L}D{@Y}D{^u}|J{^ul}' from airport KGRB)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^u}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@R}15-33}{@@}{@Y}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph }
(in sign '{@Y}TERM}{^r}{@@}{^l}TERM' from airport KHWY)
Syntax error - unknown glyph at ^ur}|G{^r}
Syntax error - unknown glyph at |G{^r}
Parse error: no closing brace.
(in sign '{@Y}F{^ur}|G{^r}' from airport KJST)
Could not find tile 37 name is -
(in sign '{@L}14-32' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}32-14' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}24-6' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}6-24' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}6-24' from airport KMKG)
Could not find tile 37 name is -
(in sign '{@L}14-32' from airport KMKG)
Syntax error - unknown glyph @
Syntax error - unknown glyph @
(in sign '{@Y}A1{^r}@@{@L}16R' from airport KPAE)
Syntax error - missing closing brace.
(in sign '{@L)R2' from airport KPBI)
Syntax error - unknown glyph x
Syntax error - unknown glyph x
Syntax error - unknown glyph x
(in sign '{@Y}{^l}x{@L}x{@Y}x{^r}' from airport KPNE)
Syntax error - unknown glyph x
Syntax error - unknown glyph x
Syntax error - unknown glyph x
(in sign '{@Y}{^l}x{@L}x{@Y}x{^r}' from airport KPNE)
Syntax error - unknown glyph at ^ul}A{@L}B{@Y}A{^ur}
Syntax error - unknown glyph at A{@L}B{@Y}A{^ur}
Syntax error - unknown glyph at B{@Y}A{^ur}
Syntax error - unknown glyph at A{^ur}
Parse error: no closing brace.
(in sign '{@Y}{^ul}A{@L}B{@Y}A{^ur}' from airport KPNE)
Syntax error - missing closing brace.
(in sign '{@L}P{@R}07{@@}{@L}P{@Y^l)A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^ru}P{@@}{@L}A
Syntax error - unknown glyph at P{@@}{@L}A
Syntax error - unknown glyph at {@L}A
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^ru}P{@@}{@L}A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}N
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^l}N' from airport KSBA)
Syntax error - unknown glyph at @Y^R}B
Syntax error - missing closing brace.
(in sign '{@L}C{@R}33R-15L{@L}{@@}C{@Y^R}B' from airport KSBA)
Syntax error - unknown glyph at ^ul}{@@}{@L}C
Syntax error - unknown glyph at {@@}{@L}C
Syntax error - unknown glyph at {@L}C
Syntax error - missing closing brace.
(in sign '{@L}C{@Y}B{^ul}{@@}{@L}C' from airport KSBA)
Syntax error - unknown glyph at ^ur}
Parse error: no closing brace.
(in sign '{@L}C{@Y}H{^ur}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}C{^r}{@@}{@L}M
Syntax error - unknown glyph at C{^r}{@@}{@L}M
Syntax error - unknown glyph at {@@}{@L}M
Syntax error - unknown glyph at {@L}M
Syntax error - missing closing brace.
(in sign '{@L}M{@Y^l}C{^r}{@@}{@L}M' from airport KSBA)
Syntax error - unknown glyph at @Y^l}F
Syntax error - missing closing brace.
(in sign '{@L}A{@Y^l}F' from airport KSBA)
Syntax error - unknown glyph at @Y^ur}C{@L}{@@}F
Syntax error - unknown glyph at C{@L}{@@}F
Syntax error - unknown glyph at {@@}F
Syntax error - missing closing brace.
(in sign '{@L}F{@R}07-25{@Y^ur}C{@L}{@@}F' from airport KSBA)
Syntax error - unknown glyph at ^lr}{@@}{@L}H
Syntax error - unknown glyph at {@@}{@L}H
Syntax error - unknown glyph at {@L}H
Syntax error - missing closing brace.
(in sign '{@L}H{@Y,^lu}C{^lr}{@@}{@L}H' from airport KSBA)
Syntax error - unknown glyph at @Y^u}E{@R}15R-33L{@L}{@@}M
Syntax error - unknown glyph at E{@R}15R-33L{@L}{@@}M
Syntax error - unknown glyph at 15R-33L{@L}{@@}M
Syntax error - unknown glyph at {@@}M
Syntax error - missing closing brace.
(in sign '{@L}M{@Y^u}E{@R}15R-33L{@L}{@@}M' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@L}N{@R}07-25{@L}{@@}N{@Y^l}A{^r}' from airport KSBA)
Syntax error - missing closing brace.
(in sign '{@L}P{@R}07{@@}{@L}P{@Y^l)A' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{@R}07-25{@L}F{@@}{@L}F{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}A{^r}
Syntax error - unknown glyph at A{^r}
Parse error: no closing brace.
(in sign '{safety}{@L}N{@R}07-25{@L}{@@}N{@Y^l}A{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^R}B
Syntax error - missing closing brace.
(in sign '{@R}33R-15L{@L}C{@@}{@L}C{@Y^R}B' from airport KSBA)
Syntax error - unknown glyph at @Y^l}B{^r}
Syntax error - unknown glyph at B{^r}
Parse error: no closing brace.
(in sign '{@R}33R-15L{@L}E{@@}{@L}E{@Y^l}B{^r}' from airport KSBA)
Syntax error - unknown glyph at @Y^l}B
Syntax error - missing closing brace.
(in sign '{@R}33R{@L}L{@@}L{@Y^l}B' from airport KSBA)
Syntax error - unknown glyph at ^ul}C|F{^r}
Syntax error - unknown glyph at C|F{^r}
Parse error: no closing brace.
(in sign '{@Y,^ul}C|F{^r}' from airport KSBA)
Syntax error - missing closing brace.
(in sign '{@Y}{^l}30_|_12{^r]' from airport SAHC)
Could not find tile 49 name is ^l
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}L{@R}16R-34L{@@}{@L}L{^l}I{^r}' from airport SBNT)
Could not find tile 49 name is ^l
Could not find tile 51 name is ^u
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}M{@R}16R-34L{@@}{@L}M{^l}I{^u}O{^r}' from airport SBNT)
Could not find tile 49 name is ^l
Could not find tile 50 name is ^r
Could not find tile 48 name is close-frame
(in sign '{@L}N{@R}16R-34L{@@}{@L}N{^l}I{^r}' from airport SBNT)
Syntax error - unknown glyph at ^ul}J
Syntax error - missing closing brace.
(in sign '{@R}34L{@Y}{^ul}J' from airport SBNT)
Could not find tile 49 name is ^l
(in sign '{@L}C{@R}34R-16L{@@}{@L}C{^l}B' from airport SBNT)
Syntax error - unknown glyph at ^L}RWY_18_|_RWY_36{^R}
Syntax error - unknown glyph at RWY_18_|_RWY_36{^R}
Parse error: no closing brace.
(in sign '{@Y}{^L}RWY_18_|_RWY_36{^R}' from airport SCIM)
Could not find tile 56 name is ^rd
Could not find tile 47 name is open-frame
Could not find tile 54 name is ^ru
(in sign '{@Y}{^lu}C{@L}C3{^rd}C|{^ru}Q3' from airport ZSPD)
Syntax error - unknown glyph (
Syntax error - unknown glyph ^
Syntax error - unknown glyph r
Syntax error - unknown glyph u
Syntax error - unknown glyph )
(in sign '{@Y}(^ru)P2{@L}C2' from airport ZSPD)
Syntax error - unknown glyph at ^U}E{^r}
Syntax error - unknown glyph at E{^r}
Parse error: no closing brace.
(in sign '{@L}P1{@Y}L15{^U}E{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}W7@L}R4{@Y}L08{^u}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^u}L08@L}R5{@Y}L09{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L09@L}E5{@Y}L09{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L09@L}R6{@Y}L08{^u}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^l}L08@L}E6{@Y}L08{^r}' from airport ZSPD)
Syntax error - unknown glyph @
Syntax error - unknown glyph }
(in sign '{@Y}{^ld}R4@L}F4{@Y}F{^ru}' from airport ZSPD)
Syntax error - unknown glyph at 6u}|E7{^r}
Syntax error - unknown glyph at |E7{^r}
Parse error: no closing brace.
(in sign '{@Y}{^l}E7{@L}L18{@Y}E{6u}|E7{^r}' from airport ZSPD)
ATC audio initialized.
0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 0.
0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 0.
0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 0.
0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.
0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 1.
0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.
0:00:00.000 I/REN: Setting |number of trees read from prefs as 4.
0:00:00.000 I/REN: Setting |number of objects read from prefs as 4.
0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.
0:00:00.000 I/REN: Setting |number of cars read from prefs as 3.
0:00:00.000 I/REN: Setting |world detail distance read from prefs as 4.
0:00:00.000 I/REN: Setting |airport detail read from prefs as 3.
0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 5.
0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 0.
0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.
0:00:00.000 I/REN: Setting |shadow detail read from prefs as 2.
0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 4.
0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 0.
0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 0.
0:00:00.000 D/State: Received: 0:0
0:00:00.000 D/HID: Hardware ADDED(068e, 00f2) - CH PRO PEDALS USB at path \\?\hid#vid_068e&pid_00f2#8&a97fc8b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: CH PRO PEDALS USB - VID:1678PID:242, this is a familiar device.
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0032) for handle: 0x89ef9a30. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0031) for handle: 0x89ef9a30. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0030) for handle: 0x89ef9a30. Min/Max 0 - 255
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 D/HID: Hardware ADDED(06a3, 0bac) - Saitek Pro Flight Yoke at path \\?\hid#vid_06a3&pid_0bac#8&1110dc24&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Saitek Pro Flight Yoke - VID:1699PID:2988, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 10 (0009, 000b) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 11 (0009, 000c) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 12 (0009, 000d) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 13 (0009, 000e) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 14 (0009, 000f) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 15 (0009, 0010) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 16 (0009, 0011) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 17 (0009, 0012) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 18 (0009, 0013) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 19 (0009, 0014) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 20 (0009, 0015) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 21 (0009, 0016) for handle: 0x89ef9b10
0:00:00.000 D/HID: BUTTON Added Index: 22 (0009, 0017) for handle: 0x89ef9b10
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x89ef9b10. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x89ef9b10. Min/Max 0 - 1023
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0034) for handle: 0x89ef9b10. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0033) for handle: 0x89ef9b10. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 4 (0001, 0032) for handle: 0x89ef9b10. Min/Max 0 - 255
0:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x89ef9b10. It has 8 positions.
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #4: device min/max (0.000000 - 255.000000) calib (0.000000 - 0.054902)
0:00:00.000 D/HID: Hardware ADDED(06a3, 0bd4) - Pro Flight Cessna Trim Wheel at path \\?\hid#vid_06a3&pid_0bd4#8&26cb2fd1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Pro Flight Cessna Trim Wheel - VID:1699PID:3028, this is a familiar device.
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0030) for handle: 0x89ef9bf0. Min/Max 0 - 1023
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Pro Flight Cessna Trim Wheel - VID:1699PID:3028 Axis #0: device min/max (0.000000 - 1023.000000) calib (0.000000 - 0.570870)
0:00:00.000 D/HID: Hardware ADDED(06a3, 0c2d) - Saitek Pro Flight Quadrant at path \\?\hid#vid_06a3&pid_0c2d#8&12687ff7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: Saitek Pro Flight Quadrant - VID:1699PID:3117, this is a familiar device.
0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x89ef9cd0
0:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x89ef9cd0
0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0032) for handle: 0x89ef9cd0. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0031) for handle: 0x89ef9cd0. Min/Max 0 - 255
0:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0030) for handle: 0x89ef9cd0. Min/Max 0 - 255
0:00:00.000 D/HID: END HARDWARE
0:00:12.991 I/ACF: Loading airplane number 0 with Aircraft/Heavy Metal/Carenado B200 King Air v1.1/Car_B200_King_Air.acf
Xsaitekpanels: Found xsaitekpanels.ini in the Xsaitekpanels plugin path and it is
./Resources/plugins/Xsaitekpanels/xsaitekpanels.ini
Xsaitekpanels: xsaitekpanels.ini is version 2.33
Xsaitekpanels: channelspacing833enable == 0
Gizmo64: Aircraft Changed..
Gizmo64: Aircraft name: (Car_B200_King_Air.acf)
Gizmo64: Aircraft path: (F:/X-Plane 10/Aircraft/Heavy Metal/Carenado B200 King Air v1.1/)
Gizmo64: gizmo_Restart()
Gizmo64: Shutting down Lua VM
Gizmo64: Releasing X-Plane overrides: sim/operation/override/*
Gizmo64: Reboot count: 0
Gizmo64: Aircraft Author: Carenado
Gizmo64: Aircraft Descrip: B200 for X-plane 10.25+ v1.0
Gizmo64: Could not find ./scripts/deployment.key
Gizmo64: Community Edition.
Gizmo64: LuaVM: OnKickStart()
Gizmo64: Completed gizmo_Restart
Fetching plugins for F:\X-Plane 10/Aircraft/Heavy Metal/Carenado B200 King Air v1.1/plugins
SASL: Starting...
X-Plane scriptable avionics library plugin v2.0.1
Loaded: F:\X-Plane 10/Aircraft/Heavy Metal/Carenado B200 King Air v1.1/plugins/sasl/64/win.xpl (1-sim.sasl).
SASL: Path to panel: F:\X-Plane 10\Aircraft\Heavy Metal\Carenado B200 King Air v1.1\avionics.lua
SASL: Loading avionics...
SASL INFO: loading panel
SASL INFO: loading views
SASL INFO: loading textureLit
SASL INFO: loading switch
SASL INFO: loading clickable
SASL INFO: loading rotated_tape
SASL INFO: loading digitstape
SASL INFO: loading rotary
SASL INFO: loading texture
SASL INFO: loading lever
SASL INFO: loading button
SASL INFO: loading rectangle
SASL INFO: loading options
SASL INFO: loading AutopilotPed
SASL INFO: loading Autopilot
SASL INFO: loading needle
SASL INFO: loading knob
SASL INFO: loading draggable
SASL INFO: loading ap_mode_btn
SASL INFO: loading CMenu
SASL INFO: loading OMenu
SASL INFO: loading AMenu
SASL INFO: loading Reset
SASL INFO: loading StaticElements
SASL INFO: loading lights
SASL INFO: loading Animations
SASL INFO: loading Misc
SASL INFO: loading Buttons
SASL INFO: including ButtonsDRF.lua
SASL INFO: loading Electrical
SASL INFO: loading propDiscVFX
SASL INFO: loading Differential
SASL INFO: loading Lean
SASL INFO: loading DigitalFF
SASL INFO: loading Radios
SASL INFO: loading FuelSystem2
SASL INFO: loading iceandrain
SASL INFO: loading DoorsWindows
SASL INFO: loading AnnunLts
SASL INFO: including AnnunLtsDRF.lua
SASL INFO: loading sound
SASL INFO: loading soundEngines
SASL INFO: including soundInit.lua
SASL INFO: loading time_logic
SASL INFO: loading Pilots
SASL INFO: loading SunVisors
SASL INFO: loading Avidyne
SASL INFO: loading rectangle2
SASL INFO: loading HSI
SASL INFO: loading PanelLogic
SASL INFO: Avionics loaded
0:00:12.991 I/FLT: Init p0 type:loc_tak apt:KORS rwy:16
0:00:12.991 I/SCN: DSF load time: 1577526 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+48-124.dsf (175141 tris)
0:00:12.991 I/SCN: DSF load time: 412048 for file Custom Scenery/KORS - Ortho - Orcas Island Airport/Earth nav data/+40-130/+48-123.dsf (0 tris)
0:00:12.991 I/SCN: DSF load time: 1655273 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+48-123.dsf (181825 tris)
0:00:12.991 I/SCN: DSF load time: 2084185 for file Custom Scenery/KSEA Demo Terrain/Earth nav data/+40-130/+48-122.dsf (275016 tris)
0:00:12.991 I/SCN: DSF load time: 1449740 for file Global Scenery/Bug Fixes/Earth nav data/+40-130/+49-124.dsf (244251 tris)
0:00:12.991 I/SCN: DSF load time: 1923667 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40-130/+49-123.dsf (295614 tris)
0:00:12.991 I/SCN: DSF load time: 1485412 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+40-130/+49-122.dsf (239733 tris)
FlyWithLua: User switched to a new airport (or changed the plane). Script files have to be reloaded.
FlyWithLua Info: Lua engine (re)started. LUA_RUN = 1, SDK_VERSION = 210, XPLANE_VERSION = 10310, XPLANE_LANGUAGE = German and XPLANE_HOSTID = 1
FlyWithLua Info: Discovered 13 HID devices.
FlyWithLua Info: Load ini file.
FlyWithLua Info: Searching for Lua script files
FlyWithLua Info: Sorting Lua script files
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/RTH_3.0RC2.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/RTH_3.0RC2.lua
FlyWithLua Info: All script files loaded successfully.
0:01:16.153 D/State: Received: 0:6
SkyMaxx Pro: Whiteout enabled
SkyMaxx Pro: Alt is 11.220072
SkyMaxx Pro: Location set to lat 48.712169 lon -122.910562 alt 11.220072
SkyMaxx Pro: Changing cloud conditions.
SkyMaxx Pro: Created cirrus layer alt 9000.000000 thickness 0.000000
SkyMaxx Pro: Cloud conditions changed. Current target visibility is 76746.601563
Gizmo64: OpenGL<->Physics Offset Default Init: -30157.357, -141.411, 31958.285
Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!
Xsaitekpanels: Found xsaitekpanels.ini in the Xsaitekpanels plugin path and it is
./Resources/plugins/Xsaitekpanels/xsaitekpanels.ini
Xsaitekpanels: xsaitekpanels.ini is version 2.33
Xsaitekpanels: channelspacing833enable == 0
Clean exit from threads.
Airport-Navigator v1.3.1 [iNFO]: AptNav::pluginDisable
DiscreetFPS: disabled
FlyWithLua Info: Load exit file.
FlyWithLua Info: Load exit file.
FlyWithLua Info: FlyWithLua plugin disabled.
SkyMaxx Pro: SilverLining deleted.
XPluginStop has been called
Airport-Navigator v1.3.1 [iNFO]: XPluginStop
Airport-Navigator v1.3.1 [iNFO]: AptNav::pluginEnd
Gizmo64: Shutting down Lua VM
Gizmo64: Releasing X-Plane overrides: sim/operation/override/*
Gizmo64: XPluginStop() complete.
0:12:41.173 I/JOY: UNREGISTER Joystick device: CH PRO PEDALS USB - VID:1678PID:242
0:12:41.173 I/JOY: UNREGISTER Joystick device: Saitek Pro Flight Yoke - VID:1699PID:2988
0:12:41.173 I/JOY: UNREGISTER Joystick device: Pro Flight Cessna Trim Wheel - VID:1699PID:3028
0:12:41.173 I/JOY: UNREGISTER Joystick device: Saitek Pro Flight Quadrant - VID:1699PID:3117
0:12:41.173 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----

Link to comment
Share on other sites

Also... ich habe mir deine Log-Datei mal angeschaut...

Mir ist aufgefallen dass dein X-Plane (X-Plane 10.31r1 (64-bit build 103100)) versucht 32Bit - Plugins zu laden... Warum auch immer. In meiner Log - Datei konnte ich das nicht feststellen...

Hier ein Beispiel für das CustomSBDatarefs004 Plugin...

So sieht es bei dir aus:

F:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: F:\X-Plane 10/Resources/plugins/CustomSBDatarefs004Win.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

Und so bei mir...

CustomSBDatarefs004 - parsing setup file
CustomSBDatarefs004 - parsing successful
Loaded: F:\X-Plane 10/Resources/plugins/CustomSBDatarefs004/64/win.xpl (sandybarbour.projects.customsbdatarefs004).

Das gleiche passiert auch bei dem nächsten Plugin. Auch hier wird wieder versucht das 32Bit Plugin zu laden...

F:\X-Plane 10/Resources/plugins/SerialFP2_XPLM.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: F:\X-Plane 10/Resources/plugins/SerialFP2_XPLM.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

Interessant wird es bei Xsaitekpanels. Auch hier lädt dein X-Plane wieder die 32Bit Variante... Aber hier mit ERFOLG!?!?!

Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch  1 Radio  1 Multi  0 BIP Panels
Loaded: F:\X-Plane 10/Resources/plugins/win.xpl (saitekpanels.hardware uses hidapi interface).

Bei mir sieht das ganze so aus:

Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch  2 Radio  1 Multi  0 BIP Panels
Loaded: F:\X-Plane 10/Resources/plugins/Xsaitekpanels/64/win.xpl (saitekpanels.hardware uses hidapi interface).

Später, nach den ganzen (üblichen) Fehlermeldungen der Szenerien versucht dein X-Plane das 64Bit Plugin von Xsaitekpanels zu laden:

Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch  1 Radio  1 Multi  0 BIP Panels
XPluginStop has been called 
Warning: F:\X-Plane 10/Resources/plugins/Xsaitekpanels/64/win.xpl Signature: saitekpanels.hardware uses hidapi interface. (A version of this plugin is already loaded.)
F:\X-Plane 10/Resources/plugins/Xsaitekpanels/win.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.

Jedoch schlägt das fehl, da schon die 32-Bit Variante läuft (A version of this plugin is already loaded.)!

Ich denke mal, hier liegt dein Problem. Nun habe ich aber keine Ahnung, wie man dem X-Plane austreibt die 32Bit variante zu laden... eventuell einfach die Datei aus dem Verzeichnis verschieben... Das wäre mein erster Versuch... Könnte aber auch sein, dass das Plugin dann gar nicht mehr geht...

Eventuell hat hier noch jemand anders Ideen...?

Viele Grüße,

Sebastian

Link to comment
Share on other sites

Stimmt! Das hier sieht nicht gut aus!

Xsaitekpanels: ver 2.33
Xsaitekpanels: found 1 Switch 1 Radio 1 Multi 0 BIP Panels
Loaded: F:\X-Plane 10/Resources/plugins/win.xpl (saitekpanels.hardware uses hidapi interface).

Die müsste normalerweise im Xsaitekpanels - Ordner sein...

Link to comment
Share on other sites

Hier mal ein Screenshot meines "plugins" Verzeichnis...

post-69239-0-05290900-1413964831_thumb.p

Und so sollte es im Xsaitekpanelsorder ausschauen....

post-69239-0-51543700-1413964826_thumb.p

Die zwei Dateien (xsaitekpanels_233_777.ini & xsaitekpanels_233_CRJ2.ini) kannst Du ignorieren :-) Das sind meine Konfigurationen für die CRJ2 und die T7...

Link to comment
Share on other sites

Danke Jungs für die Anteilnahme. Ich werde die win.xpl datei mal in den richtigen Ordner verschieben. Aber die anderen Fehlermeldungen, woher die kommen, bzw. wie ich das ändern könnte, da brauch ich nochmal Hilfe.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use