Seahawk rear wheels floating

[kdfw 0]

Hi,

Just bought the seahawk. I see the real wheel floating in the air (idle or engine off) as shown in the pic.

When the aircraft is initially loaded, the wheel makes contact, but whenever the attitude changes after applying thrust, the rear wheel stays floating on the ground.

Happens in default scenery everywhere. Patch 1.15 applied.

What can I do to fix this?

Thanks,

Pat

[Shaun Fletcher 570]

Hello PAt,

Can you try changing the contact points section in the aircraft.cfg to the ones below.

[contact_points]

point.0= 1.000, -10.700, 0.000, -3.555, 1574.800, 0.0000, 0.519, 45.000, 1.400, 1.000, 2.000, 0.000, 0.000, 0.000, 0.000, 0.000

point.1= 1.000, 3.500, -4.400, -2.980, 1574.800, 1.000, 1.819, 0.000, 0.396, 2.500, 0.728, 0.000, 0.000, 2.000, 0.000, 0.000

point.2= 1.000, 3.500, 4.400, -2.980, 1574.800, 2.000, 1.819, 0.000, 0.396, 2.500, 0.728, 0.000, 0.000, 3.000, 0.000, 0.000

point.3= 2.000, 0.000, -16.670, 9.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5.000, 0.000, 0.000

point.4= 2.000, 0.000, 16.670, 9.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6.000, 0.000, 0.000

point.5= 2.000, -20.500, 0.000, 1.670, 787.400, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9.000, 0.000, 0.000

point.6= 2.000, 0.000, 9.080, 2.580, 787.400, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4.000, 0.000, 0.000

point.7 = 5.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 1.000, 1.200, 0.000, 0.000, 0.000

[kdfw 0]

Shaun,

Thanks. Figured the contact points were off. The wheels are now well behaved.

Is this a global aircraft.cfg file problem or just my own problem?

This is a pretty bird.

Pat

[João Pinto 23]

I never had this problem myself, but it was reported by some costumers.

[Shaun Fletcher 570]

Hello Pat,

As you can see, "Some do, some dont"

Um is there a song there somewhere