rm2242 0 Posted September 23, 2013 Share Posted September 23, 2013 Hi Just getting to grips with using PFPX - it certainly has a lot of functionality. Having an issue with defining routes. If i use the main button to choose the option to define a new route (ie. not opening the route database first), i can successfully fill in the origin and destination airport codes, and PFPX will automatically define the route name (eg. KLAXKIAD01), and when I hit save, it will be saved as such. However, if i use the main button to go to the route database, and use the "new route" button from the route database window, the new route window opens up the same as before but after completing the origin and destination fields, PFPX fails to fill in the route name (instead leaving it at a default "(No Name)"). I yesterday defined 30 routes this way, which all seemed to save successfully under "No Name" and showed in the route database, however upon leaving PFPX and opening it up again, only one of the "No Name" routes had in fact saved. I have learnt my lesson with this, and now will only define new routes from the main button itself and do not first open up the route database. I am running the latest version. Can anyone re-create/confirm this bug? Sorry if my description is a bit vague - I am not on my PFPX computer right now. Thanks rm2242 Link to comment Share on other sites More sharing options...
Jarkko 39 Posted September 23, 2013 Share Posted September 23, 2013 Just to confirm, that I have the same behavior with 1.07 Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted September 23, 2013 Administrator Share Posted September 23, 2013 Hello rm2242, i have closed your same question in the german forum with a link to this thread. http://forum.aerosoft.com/index.php?/topic/73504-saving-routes-possible-bug/#entry525632 Because it is not good to post the same question at several locations... That makes the forum big and confused.... Greets. Link to comment Share on other sites More sharing options...
rm2242 0 Posted September 23, 2013 Author Share Posted September 23, 2013 Hello rm2242, i have closed your same question in the german forum with a link to this thread. http://forum.aerosoft.com/index.php?/topic/73504-saving-routes-possible-bug/#entry525632 Because it is not good to post the same question at several locations... That makes the forum big and confused.... Greets. Thank you - I posted it there by mistake. My apologies for that - was certainly not intentional. Link to comment Share on other sites More sharing options...
rm2242 0 Posted September 23, 2013 Author Share Posted September 23, 2013 Just to confirm, that I have the same behavior with 1.07 Good to know - thanks for taking the time to respond.. Anyone else? I have raised a ticket. Cheers all. Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted September 23, 2013 Administrator Share Posted September 23, 2013 Thank you - I posted it there by mistake. My apologies for that - was certainly not intentional. Hello rm2242, yes, i know all is right... Greets Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted September 26, 2013 Share Posted September 26, 2013 This issue has been fixed already. Link to comment Share on other sites More sharing options...
Jarkko 39 Posted September 26, 2013 Share Posted September 26, 2013 I still have PFPX crashing on saving after route has been validated. I added more info to a ticket I submitted earlier. Link to comment Share on other sites More sharing options...
rm2242 0 Posted September 26, 2013 Author Share Posted September 26, 2013 This issue has been fixed already. Thanks Christian - to confirm, is this issue fixed in the 1.07 to 1.08 update? I am running 1.07 and am yet to try 1.08. Appreciate your efforts in ironing out the creases - its a great bit of software. Link to comment Share on other sites More sharing options...
jimbim 22 Posted September 26, 2013 Share Posted September 26, 2013 Hello together, I tested the scenario described above (First open route manager, then clicking on new route) and I have to say that with V1.08 I was able to reproduce the bug. So at least for me, the bug still exists :-( Greetings, Sebastian Link to comment Share on other sites More sharing options...
rm2242 0 Posted September 26, 2013 Author Share Posted September 26, 2013 Hello together, I tested the scenario described above (First open route manager, then clicking on new route) and I have to say that with V1.08 I was able to reproduce the bug. So at least for me, the bug still exists :-( Greetings, Sebastian Thanks Sebastian - appreciate you trying this out. Im afraid Christian, I can confirm that after testing 1.08, I too still get this error. Regards rm2242 Link to comment Share on other sites More sharing options...
jimbim 22 Posted September 26, 2013 Share Posted September 26, 2013 Hey, as long as there is a known work-around, priority 2 or 3 :-) Greetings, Sebastian Link to comment Share on other sites More sharing options...
rm2242 0 Posted September 29, 2013 Author Share Posted September 29, 2013 Confirmed in version 1.09 as well. No response to my ticket I raised either. Christian - can you confirm that this is back on the bug list please? Thanks rm2242 Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted October 2, 2013 Share Posted October 2, 2013 Tried to reproduce the issue several times without luck. Would need more information like operating system, steps to reproduce, etc... Link to comment Share on other sites More sharing options...
rm2242 0 Posted October 5, 2013 Author Share Posted October 5, 2013 Tried to reproduce the issue several times without luck. Would need more information like operating system, steps to reproduce, etc... Ok so... 1. I load PFPX, go to Route Manager > Route Database 2. Click on "New" 3. Populate the starting and ending ICAO code and route, then build it. The box "Route" does not populate with anything and remains blank 4. Press save. Screen reverts to route database with my new route there and the name stated as "(No Name)". Route remains in the database but is not physically saved on my harddrive (only one route named "(No Name)" is physically saved and the rest appear in the database of PFPX only. You cannot open or edit them or even delete them. Closing PFPX and going back in to causes them to disappear from the route database. Alternative 1. I load PFPX, go to Route Manager > Route Editor 2. Populate the starting and ending ICAO code and route, then build it. The box "Route" this time automatically populates with "(No Name)" 3. Press save. The Save Route window opens, and this time the "Route" field is populates with eg. KLASKEAS01. 4. Press save again and the window closes back to Route Editor. I close this and revert to main screen. 5. I then load up the route database and my new route appears there but with the name stated as "(No Name)". Route remains in the database but is not physically saved on my harddrive (only one route names "(No Name)" is physically saved and the rest appear in the database only. You cannot open or edit them or even delete them. Closing PFPX and going back in to causes them to disappear from the route database. I cannot figure out what on earth is wrong with this. It makes it totally unusable for me! There was a work around I stated above, but bot methods now result in the same frustration since one of the updates. I am running 1.09, using Windows 7 64bit. I have tried re-installing, running as Administrator, trying on different hard drives, all with no luck. Appreciate your help. rm2242 Link to comment Share on other sites More sharing options...
B.Fatih KOZ 3 Posted October 17, 2013 Share Posted October 17, 2013 Hi , with version 1.10 I confirm that the issue still valid ... Windows 7 64bit , running as admin (always) , ver 1.10 installed directly (no prior versions installed before) . Just above procedure is used to test , same results . Currently saving routes is not possible Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted October 18, 2013 Share Posted October 18, 2013 Okay, I'm able to reproduce the problem now: It just happens when saving (empty) routes, right? Link to comment Share on other sites More sharing options...
B.Fatih KOZ 3 Posted October 18, 2013 Share Posted October 18, 2013 No Christian , It happens routes with route section filled ... I tried to save two routes for a domestic flight ; ESBTZX01 : ILHAN UW71 TEMEL TZXESB01 : TEMEL UW71 ILHAN Both gave the same error (No Name) ... Hope you can solve this soon . Best wishes PS : What you mean by (empty) routes btw ? If you mention the name , yes we are not able to put a name for the route , so routing is not important , name field makes the problem I suppose . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.