kiekar 0 Posted September 15, 2013 Share Posted September 15, 2013 Hello, I'm some what confused about the output of a manual route I entered. I normaly use routes from fligtaware. When i enter a route such as KESKA BIPKO IPSAK OMEGI RADEN 4700N08000W TADIS UDBOX BEVEL 4930N11500W BOOTH CANUC2 for CYUL to CYVR and then build the route the output of route changes to IPSAK DCT 47N080W DCT TADIS DCT BEVEL DCT 50N115W DCT BOOTH BOOTH9. Why is it that some of the intersections disappear? I usally enter the flight plan manually in the FMC so when I print the OFP these are the values ATC ROUTE: N0458F340 DCT IPSAK DCT 47N080W DCT TADIS/N0455F360 DCT 50N110W DCT 50N115W DCT BOOTH BOOTH9 Is this how it is in real flight planning with routes? Any explantion would be much appreciated Regards, Karl Link to comment Share on other sites More sharing options...
Checkursix 3 Posted September 15, 2013 Share Posted September 15, 2013 Which cycle is your Navdata? Some of those fixes out of Montreal are new as of earlier this year, I believe. 4930N/115W is not in the current database either, so that is why it is dropped. As for the STAR, I think the program is selecting the shorter arrival, but you should be able to override it selecting the Canuck arrival from the drop down menu in the route editor. Link to comment Share on other sites More sharing options...
kiekar 0 Posted September 15, 2013 Author Share Posted September 15, 2013 Which cycle is your Navdata? Some of those fixes out of Montreal are new as of earlier this year, I believe. 4930N/115W is not in the current database either, so that is why it is dropped. As for the STAR, I think the program is selecting the shorter arrival, but you should be able to override it selecting the Canuck arrival from the drop down menu in the route editor. Hello, I'm using NG 1309. As for my example above the departing airport is CYUL. I just don't understand why intersections OMEGI and RADEN get dropped after intersection IPSAK. Link to comment Share on other sites More sharing options...
Checkursix 3 Posted September 15, 2013 Share Posted September 15, 2013 In that case, I don't understand either. I use the NG1309 as well, and I have routed flights out of YUL via those waypoints with no problem. Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted September 16, 2013 Share Posted September 16, 2013 Confirm you are using the latest version? There has been an issue in previous ones. Link to comment Share on other sites More sharing options...
kiekar 0 Posted September 22, 2013 Author Share Posted September 22, 2013 Confirm you are using the latest version? There has been an issue in previous ones. Hello, I upgraded to v1.07 but unfortunately the route still changes after I build the route. I tried a new route from CYUL - CYVR From flightaware: KESKA BIPKO IPSAK OMEGI RADEN 4800N 08000W 4900N 09000W 4930N 10000W BEVEL 4930N 12000W BOOTH CANUC2 After build: IPSAK DCT 48N080W DCT 49N090W DCT 50N100W DCT BEVEL DCT 50N120W DCT BOOTH BOOTH9 Link to comment Share on other sites More sharing options...
FlightSimSoft.com 283 Posted September 22, 2013 Share Posted September 22, 2013 Fixed the issue. 1.08 should do the trick. Link to comment Share on other sites More sharing options...
jc75 0 Posted September 23, 2013 Share Posted September 23, 2013 Where do we get 1.08 from not showing on servers? Link to comment Share on other sites More sharing options...
mikkelgh 5 Posted September 23, 2013 Share Posted September 23, 2013 It isn't released yet Link to comment Share on other sites More sharing options...
kiekar 0 Posted September 24, 2013 Author Share Posted September 24, 2013 Fixed the issue. 1.08 should do the trick. Hello, I updated to 1.08 but unfortunately nothing changed with regards to manual routing. Same story intersections KESKA BIPKO OMEGI RADEN are dropped. Flight aware flight plan from CYUL - CYVR : KESKA BIPKO IPSAK OMEGI RADEN 4700N 08000W 4930N 09000W 5130N 10000W 5130N 11000W SPRAE BOOTH CANUC2 After build: IPSAK DCT 47N080W DCT 50N090W DCT 52N100W DCT 52N110W DCT SPRAE DCT BOOTH CANUC2 and from OFP: ATC ROUTE: N0454F340 DCT IPSAK DCT 47N080W DCT 50N090W/N0455F360 DCT 52N100W DCT 52N110W DCT SPRAE DCT BOOTH CANUC2 Link to comment Share on other sites More sharing options...
kiekar 0 Posted September 25, 2013 Author Share Posted September 25, 2013 Hello, I updated to 1.08 but unfortunately nothing changed with regards to manual routing. Same story intersections KESKA BIPKO OMEGI RADEN are dropped. Flight aware flight plan from CYUL - CYVR : KESKA BIPKO IPSAK OMEGI RADEN 4700N 08000W 4930N 09000W 5130N 10000W 5130N 11000W SPRAE BOOTH CANUC2 After build: IPSAK DCT 47N080W DCT 50N090W DCT 52N100W DCT 52N110W DCT SPRAE DCT BOOTH CANUC2 and from OFP: ATC ROUTE: N0454F340 DCT IPSAK DCT 47N080W DCT 50N090W/N0455F360 DCT 52N100W DCT 52N110W DCT SPRAE DCT BOOTH CANUC2 All is working fine now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.