Tom_Weiss 42 Posted August 20, 2013 Share Posted August 20, 2013 any liveries after [FLTSIM.2] are not shown, the Tundra models works Ok, if I add the old 1.03 Wheels folder, all skins load. Link to comment Share on other sites More sharing options...
Finn 873 Posted August 20, 2013 Share Posted August 20, 2013 After re-install there are only 3 liveries for the wheeled version. How did You add the other (3rd party) liveries ? Manually or via the Livery manager ?? Finn Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 manually - as I did for the tundra version without any problems. Link to comment Share on other sites More sharing options...
gr.eg 4 Posted August 20, 2013 Share Posted August 20, 2013 Hi, After the patch, liveries manually added go away. You must make a backup of the aircraft.cfg before to apply the update/patch... Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 I already did that ... [FLTSIM.0] title =Aerosoft DHC-6 Series 300 Wheels sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =DIVER kb_checklists = kb_reference = atc_id =D-IVER atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Businesswings D-IVER" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.1] title =Aerosoft DHC-6 Series 300 AKLAK AIR sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =CGDHC kb_checklists = kb_reference = atc_id =C-GDHC atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Alak Air C-GDHC" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.2] title =Aerosoft DHC-6 Series 300 Solomon sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =FEDEX Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =H4-FNT atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Flysolomons H4-FNT" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.4] title =Aerosoft DHC-6 Series 300 FEDEX Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =FEDEX Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N38535 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FEDEX Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.5] title =Aerosoft DHC-6 Series 300 RCAF Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =RCAF Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =13802 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="RCAF Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.6] title =Aerosoft DHC-6 Series 300 FRONTIER Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =FRONTIER Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FRONTIER Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.7] title =Aerosoft DHC-6 Series 300 British Antarctic Survey Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =British Antarctic Survey Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =VPFAZ atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.8] title =Aerosoft DHC-6 Series 300 Kenn Borek Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =Kenn Borek Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =C-GKBO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Kenn Borek Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft [FLTSIM.9] title =Aerosoft DHC-6 Series 300 ROCKY MOUNTAIN Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =ROCKY MOUNTAIN Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N24RM atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="ROCKY MOUNTAIN Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.10] title =Aerosoft DHC-6 Series 300.3B-C British Antarctic Survey Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =British Antarctic Survey Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =VPFAZ atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300.3B-C by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.11] title =Aerosoft DHC-6 Series 300.3B-C KENN BOREK by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =KENN BOREK Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =C-GKBO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300.3B-C by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.12] title =Aerosoft DHC-6 Series 300.3B-C RCAF by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =RCAF Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =13802 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="300.3B-C RCAF by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.13] title =Aerosoft DHC-6 Series 300.3B-P ROCKY MOUNTAIN Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =ROCKY MOUNTAIN Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N24RM atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="ROCKY MOUNTAIN 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [GENERAL] atc_type = Twin Otter atc_model = DHC-6 performance = category = airplane [FLTSIM.14] title =Aerosoft DHC-6 Series 300.3B-P FRONTIER Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =FRONTIER Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FRONTIER 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.15] title =Aerosoft DHC-6 Series 300.3B-P NorOntair Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =NorOntair Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =CFTVO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="NorOntair Srs300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.16] title =Aerosoft DHC-6 Series 300.3B-P CAYMAN by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =CAYMAN Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="CAYMAN 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.17] title =Aerosoft DHC-6 Series 300.3B-P PAN AM by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =PAN AM Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="PAN AM 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" the Tundra models loaded, the wheels did not Link to comment Share on other sites More sharing options...
Tigerclaw 31 Posted August 20, 2013 Share Posted August 20, 2013 Then copy the relevant paint texts back into the new Aircraft.cfg. I always add my paints as follows: // ***** New Paints Below This line ***** [fltsim.XX] Title Sim model etc. [fltsim.xx] title sim model etc. // ***** New Paints Above This Line ***** Then I just copy the whole lot from the first // ***** to the last // ***** inclusive. It keeps it neat, and easily manageable. And I ALWAYS make a copy of the Aircraft.cfg before I install updates of ANY plane. EDIT: Just noticed your Aircraft.cfg file. you don't have a [fltsim.3] entry, so it will stop at 2. You need to either ADD a fltsim.3 (another paint), OR renumber 4 to 3, 5 to 4, 6 to 5 etc. Also ALL the entries below the [General] section need to be ABOVE it. Then it will see all the paints Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 that one was deleted by Aerosoft. I re-installed it restarted the PC re loaded FSX added the skin folders edited the aircraft.cfg same problem, no liveries load but for the first 3 in the wheels version, all liveries load OK in the tundra version. IF I RENAME THE NEW 1.04 FOLDER and ADD THE OLD 1.03 WHEEL FOLDER the skins load again IF I DELETE THE RENAMED 1.04 FOLDER and keep the OLD 1.03 folder, the skin still load therefore, the problem is in the new 1.04 patch that does not load the skins. Link to comment Share on other sites More sharing options...
gr.eg 4 Posted August 20, 2013 Share Posted August 20, 2013 That's because of that 2 lines in fltsim # 1 and 2: ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" I've mentioned the pb sooner... Put a Carriage Return to give -> ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" Or because the entry [fltsim.3] is missing: you must renumber the list... Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 I tried , that does not make it work, simply won't load. something is missing in the 1.04 install - and I used the complete version of 1.04 not the update. Link to comment Share on other sites More sharing options...
Finn 873 Posted August 20, 2013 Share Posted August 20, 2013 May I suggest that You add Your extra liveries one by one, checking that thay load for each new added livery ? I also see that You have a: [GENERAL] atc_type = Twin Otter atc_model = DHC-6 performance = category = airplane Burried within the list of liveries. Finn Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 [FLTSIM.0] title =Aerosoft DHC-6 Series 300 Wheels sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =DIVER kb_checklists = kb_reference = atc_id =D-IVER atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Businesswings D-IVER" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.1] title =Aerosoft DHC-6 Series 300 AKLAK AIR sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =CGDHC kb_checklists = kb_reference = atc_id =C-GDHC atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Alak Air C-GDHC" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.2] title =Aerosoft DHC-6 Series 300 Solomon sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =H4FNT kb_checklists = kb_reference = atc_id =H4-FNT atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Flysolomons H4-FNT" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.4] title =Aerosoft DHC-6 Series 300 FEDEX Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =FEDEX Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N38535 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FEDEX Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.5] title =Aerosoft DHC-6 Series 300 RCAF Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =RCAF Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =13802 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="RCAF Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.6] title =Aerosoft DHC-6 Series 300 FRONTIER Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =FRONTIER Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FRONTIER Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.7] title =Aerosoft DHC-6 Series 300 British Antarctic Survey Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =British Antarctic Survey Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =VPFAZ atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.8] title =Aerosoft DHC-6 Series 300 Kenn Borek Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =Kenn Borek Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =C-GKBO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Kenn Borek Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft [FLTSIM.9] title =Aerosoft DHC-6 Series 300 ROCKY MOUNTAIN Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =ROCKY MOUNTAIN Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N24RM atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="ROCKY MOUNTAIN Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.10] title =Aerosoft DHC-6 Series 300.3B-C British Antarctic Survey Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =British Antarctic Survey Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =VPFAZ atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300.3B-C by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.11] title =Aerosoft DHC-6 Series 300.3B-C KENN BOREK by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =KENN BOREK Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =C-GKBO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="British Antarctic Survey Srs300.3B-C by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.12] title =Aerosoft DHC-6 Series 300.3B-C RCAF by Tom Weiss sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =RCAF Srs300.3B-C by Tom Weiss kb_checklists = kb_reference = atc_id =13802 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="300.3B-C RCAF by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.13] title =Aerosoft DHC-6 Series 300.3B-P ROCKY MOUNTAIN Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =ROCKY MOUNTAIN Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N24RM atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="ROCKY MOUNTAIN 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.14] title =Aerosoft DHC-6 Series 300.3B-P FRONTIER Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =FRONTIER Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FRONTIER 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.15] title =Aerosoft DHC-6 Series 300.3B-P NorOntair Srs300 by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =NorOntair Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =CFTVO atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="NorOntair Srs300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.16] title =Aerosoft DHC-6 Series 300.3B-P CAYMAN by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =CAYMAN Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="CAYMAN 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" ui_createdby ="Aerosoft" [FLTSIM.17] title =Aerosoft DHC-6 Series 300.3B-P PAN AM by Tom Weiss sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =PAN AM Srs300.3B-P by Tom Weiss kb_checklists = kb_reference = atc_id =N983FL atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="PAN AM 300.3B-P by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [GENERAL] atc_type = DeHavilland atc_model = DHC6 performance = category = airplane [reference speeds] flaps_up_stall_speed = 80 full_flaps_stall_speed = 66 cruise_speed = 120 max_mach = 0.30 max_indicated_speed = 170 [FLIGHT_TUNING] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.0 induced_drag_scalar = 1.0 elevator_effectiveness = 1.0 aileron_effectiveness = 1.0 rudder_effectiveness = 1.0 pitch_stability = 1.0 roll_stability = 1.0 yaw_stability = 1.0 elevator_trim_effectiveness = 1.0 aileron_trim_effectiveness = 1.0 rudder_trim_effectiveness = 1.0 hi_alpha_on_roll = 1.0 hi_alpha_on_yaw = 1.0 p_factor_on_yaw = 0.0 torque_on_roll = 0.0 gyro_precession_on_yaw = 1.0 gyro_precession_on_pitch = 1.0 [REALISMCONSTANTS] rollmomentfrombeta = 1.0, 0 rollmomentfromailerons = 1.0, 0 pitchmomentzeroalpha = 1.0, 0 [WEIGHT_AND_BALANCE] empty_weight = 6850 // 6850 = Seats Installed, 6500 = Freight max_gross_weight = 12500 empty_weight_pitch_moi = 18782 empty_weight_roll_moi = 12419 empty_weight_yaw_moi = 31388 empty_weight_coupled_moi = 1600 reference_datum_position = 0.000, 0.000, 0.000 empty_weight_cg_position = -0.730, 0.000, 0.000 max_number_of_stations = 12 station_load.0 = 170.0, 9.27, -1.40, -2.00, station_load.1 = 170.0, 9.27, 1.40, -2.00, station_load.2 = 0.0, 5.94, 0.00, -2.00, station_load.3 = 0.0, 3.44, 0.00, -2.00, station_load.4 = 0.0, 1.10, 0.00, -2.00, station_load.5 = 0.0, -1.56, 0.00, -2.00, station_load.6 = 0.0, -3.98, 0.00, -2.00, station_load.7 = 0.0, -6.23, 0.00, -2.00, station_load.8 = 0.0, -8.48, 0.00, -2.00, station_load.9 = 0.0, 15.10, 0.00, -3.00, station_load.10 = 0.0, -12.31, 0.00, -3.00, station_load.11 = 0.0, -15.40, 0.00, -3.00, station_name.0 = Pilot station_name.1 = Co-Pilot station_name.2 = Row 1 station_name.3 = Row 2 station_name.4 = Row 3 station_name.5 = Row 4 station_name.6 = Row 5 station_name.7 = Row 6 station_name.8 = Row 7 station_name.9 = Fwd (200lb) station_name.10 = Aft (500lb) station_name.11 = Aft Ext (150lb) [EXITS] number_of_exits = 4 exit.0 = 0.4, 0.0, 0.0, 0.0, 0 exit.1 = 0.4, 0.0, 0.0, 0.0, 1 exit.2 = 0.4, 0.0, 0.0, 0.0, 1 exit.3 = 0.4, 0.0, 0.0, 0.0, 1 [FUEL] fuel_type = 2 number_of_tank_selectors = 2 electric_pump = 1 fuel_dump_rate = 0.002 //! engine_driven_pump = 1 manual_pump = 0 anemometer_pump = 0 center1 = 3.64, 0.00, -5.0, 181.0, 0.0 center2 = -2.81, 0.00, -5.0, 197.0, 0.0 lefttip = 0.46, -29.00, 2.95, 37.00, 1.45 righttip = 0.46, 29.00, 2.95, 37.00, 1.45 [AIRPLANE_GEOMETRY] wing_area = 420.0 wing_span = 65.0 wing_root_chord = 6.50 wing_dihedral = 3.0 wing_incidence = 2.5 wing_twist = 0.0 oswald_efficiency_factor = 0.70 wing_winglets_flag = 0 wing_sweep = 0.00 wing_pos_apex_lon = 1.50 wing_pos_apex_vert = -0.50 htail_area = 98.0 htail_span = 20.67 htail_pos_lon = -24.2 htail_pos_vert = 0.40 htail_incidence = 1.0 htail_sweep = 0.0 vtail_area = 99.0 vtail_span = 7.53 vtail_sweep = 23.57 vtail_pos_lon = -22.3 vtail_pos_vert = -1.0 elevator_area = 23.25 aileron_area = 22.75 rudder_area = 34.0 elevator_up_limit = 25.0 elevator_down_limit = 16.0 aileron_up_limit = 17.5 aileron_down_limit = 16.0 rudder_limit = 21.0 elevator_trim_limit = 20.0 spoiler_limit = 60.0 spoiler_extension_time = 1.0 spoilerons_available = 0 aileron_to_spoileron_gain = 0 min_ailerons_for_spoilerons = 0 min_flaps_for_spoilerons = 0 auto_spoiler_available = 0 positive_g_limit_flaps_up = 8.5 positive_g_limit_flaps_down = 8.5 negative_g_limit_flaps_up = -2.5 negative_g_limit_flaps_down = -2.5 load_safety_factor = 1.0 fly_by_wire = 0 spoiler_handle_available = 1 flap_to_aileron_scale = 0 aileron_to_rudder_scale = 0 [FLAPS.0] type = 1 // LE and TE Primary Flaps span-outboard = 0.350 extending-time = 25.0 damaging-speed = 155 blowout-speed = 180 lift_scalar = 1.00 drag_scalar = 1.00 pitch_scalar = 1.00 system_type = 0 flaps-position.0 = 0 flaps-position.1 = 10 flaps-position.2 = 20 flaps-position.3 = 30 flaps-position.4 = 37.5 [GENERALENGINEDATA] engine_type = 5 engine.0 = 7.00, -9.16, -0.20 engine.1 = 7.00, 9.16, -0.20 fuel_flow_scalar = 1.00 min_throttle_limit = -0.45 max_contrail_temperature = -15 // ! master_ignition_switch = 1 // ! starter_type = 0 // ! thrustanglepitchheading.0 = 0.0, 0.0 thrustanglepitchheading.1 = 0.0, 0.0 [TURBINEENGINEDATA] fuel_flow_gain = 0.1 inlet_area = 1.0 // -300 // rated_N2_rpm = 36576 // 96% of 38,100 // -100 // rated_N2_rpm = 38100 // 100% of 38,100 rated_N2_rpm = 36576 // 96% of 38,100 static_thrust = 50 [TURBOPROP_ENGINE] power_scalar = 1.00 // -300 // maximum_torque = 1536 // 620shp @2,200RPM // -100 // maximum_torque = 1315 // 550shp @2,200RPM maximum_torque = 1636 // 620shp @2,200RPM PowerSpecificFuelConsumption = 0.687 [PROPELLER] thrust_scalar = 1.0 // (5) propeller_type = 0 propeller_diameter = 8.50 // (4) propeller_blades = 3 propeller_moi = 18.0 // (2) beta_max = 29.0 beta_min = 14.0 min_gov_rpm = 26667 // (3) prop_tc = 0.00005 gear_reduction_ratio = 17.34 fixed_pitch_beta = 0.0 low_speed_theory_limit = 80 prop_sync_available = 1 prop_deice_available = 1 prop_feathering_available = 1 prop_auto_feathering_available = 1 min_rpm_for_feather = 700 beta_feather = 87.0 power_absorbed_cf = 0.989 defeathering_accumulators_available = 0 feathering_switches = 1 prop_reverse_available = 1 minimum_on_ground_beta = 12.0 minimum_reverse_beta = -15.0 [VIEWS] eyepoint = 8.97, -1.46, -1.1 zoom = 0.4 [CONTACT_POINTS] point.0 = 1, 12.70, 0.00, -9.60, 1500, 0, 1.12, 50, 0.2, 4.04, 0.90, 0, 0, 0, 0 point.1 = 1, -2.13, -5.95, -9.82, 3000, 1, 1.28, 0, 0.5, 2.04, 0.80, 0, 0, 2, 0 point.2 = 1, -2.13, 5.95, -9.82, 3000, 2, 1.28, 0, 0.5, 2.04, 0.80, 0, 0, 3, 0 point.3 = 2, 0.00, -32.50, 1.10, 100, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0 // Port Wing point.4 = 2, 0.00, 32.50, 1.10, 100, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0 // Starboard Wing point.5 = 2, 19.00, 0.00, -4.50, 100, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0 // Nose point.6 = 2, -32.70, 0.00, 9.00, 100, 0, 0, 0, 0, 0, 0, 0, 0, 7, 0, 0 // Tail point.7 = 3, -27.00, 0.00, -4.70, 1600, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0 // Tail Skid max_number_of_points = 11 //AES Orgvalue:static_pitch = -0.5 static_pitch = 0.1 //-3.56 //AES Orgvalue:static_cg_height = 10.5 static_cg_height = 9.33 gear_system_type = 0 [bRAKES] parking_brake = 1.2 toe_brakes_scale = 0.6 auto_brakes = 0 hydraulic_system_scalar = 1 differential_braking_scale = 0.2 [GEAR_WARNING_SYSTEM] gear_warning_available = 0 pct_throttle_limit = 0.1 flap_limit_idle = 15.0 flap_limit_power = 30.0 [sTALL_WARNING] type = 2 stick_shaker = 1 [LIGHTS] light.0 = 10, 8.1, 0.60, -0.60, fx_twotter_vclight , light.1 = 7, 9.5, 0.0, -0.90, fx_twotter_vclightred , [EFFECTS] wake = fx_wake water = fx_spray dirt = fx_tchdrt concrete = fx_sparks touchdown = fx_tchdwn_s, 1 [ELECTRICAL] max_battery_voltage = 28.0 generator_alternator_voltage = 29.0 max_generator_alternator_amps = 400.0 electric_always_available = 0 autopilot = 0, 0, 1 avionics_bus = 0, 0, 1 avionics = 0, 0, 1 pitot_heat = 0, 0, 1 additional_system = 0, 0, 1 marker_beacon = 0, 0, 1 gear_warning = 0, 0, 1 fuel_pump = 0, 0, 1 starter1 = 0, 0, 1 starter2 = 0, 0, 1 starter3 = 0, 0, 1 starter4 = 0, 0, 1 light_nav = 0, 0, 1 light_beacon = 0, 0, 1 light_landing = 0, 0, 1 light_taxi = 0, 0, 1 light_strobe = 0, 0, 1 light_panel = 0, 0, 1 auto_brakes = 0, 0, 1 hydraulic_pump = 0, 0, 1 fuel_transfer_pump = 0, 0, 1 light_recognition = 0, 0, 1 light_wing = 0, 0, 1 light_logo = 0, 0, 1 light_cabin = 0, 0, 1 [RADIOS] Audio.1 = 1 Com.1 = 1, 1 Com.2 = 1, 1 Nav.1 = 1,1,1 Nav.2 = 1,1,1 Adf.1 = 1 Transponder.1 = 1 Marker.1 = 1 [ALTIMETERS] altimeter.0 = 1 altimeter.1 = 1 [ATTITUDE_INDICATORS] attitude_indicator.0 = 2 attitude_indicator.1 = 2 [DEICE_SYSTEM] structural_deice_type = 2 [DIRECTION_INDICATORS] direction_indicator.0 = 2,0 direction_indicator.1 = 2,0 [PITOT_STATIC] vertical_speed_time_constant = 1 pitot_heat = 1 [PNEUMATIC_SYSTEM] max_pressure = 18.000000 bleed_air_scalar = 1.000000 [TURN_INDICATORS] turn_indicator.0 = 1 turn_indicator.1 = 1 [VACUUM_SYSTEM] max_pressure = 5.15 vacuum_type = 2 [KEYBOARD_RESPONSE] elevator = 150, 250 aileron = 150, 250 rudder = 150, 250 [AUTOPILOT] autopilot_available = 1 default_pitch_mode = 0 default_bank_mode = 0 flight_director_available = 1 default_vertical_speed = 1000 autothrottle_available = 0 pitch_takeoff_ga = 18 max_pitch = 10.00 max_pitch_acceleration = 1.00 max_pitch_velocity_lo_alt = 2.00 max_pitch_velocity_hi_alt = 1.50 max_pitch_velocity_lo_alt_breakpoint = 20000 max_pitch_velocity_hi_alt_breakpoint = 24000 max_bank = 25.00 max_bank_acceleration = 2.0 max_bank_velocity = 3.0 max_throttle_rate = 0.30 nav_proportional_control = 9.00 nav_integrator_control = 0.25 nav_derivative_control = 0.00 nav_integrator_boundary = 2.50 nav_derivative_boundary = 0.00 gs_proportional_control = 9.52 gs_integrator_control = 0.26 gs_derivative_control = 0.00 gs_integrator_boundary = 0.70 gs_derivative_boundary = 0.00 yaw_damper_gain = 1.00 [FORCEFEEDBACK] stick_shaker_magnitude = 5000 stick_shaker_direction = 0 stick_shaker_period = 111111 gear_bump_nose_magnitude = 3000 gear_bump_nose_direction = 18000 gear_bump_nose_duration = 250000 gear_bump_left_magnitude = 2700 gear_bump_left_direction = 9000 gear_bump_left_duration = 250000 gear_bump_right_magnitude = 2700 gear_bump_right_direction = 27000 gear_bump_right_duration = 250000 ground_bumps_magnitude1 = 1300 ground_bumps_angle1 = 08900 ground_bumps_intercept1 = 3.0 ground_bumps_slope1 = 0.20 ground_bumps_magnitude2 = 200 ground_bumps_angle2 = 09100 ground_bumps_intercept2 = 1.075 ground_bumps_slope2 = 0.035 crash_magnitude1 = 10000 crash_direction1 = 01000 crash_magnitude2 = 10000 crash_direction2 = 9000 crash_period2 = 75000 crash_duration2 = 2500000 [HYDRAULIC_SYSTEM] electric_pumps = 0 engine_map = 1,1,0,0 normal_pressure = 3000.000000 [CameraDefinition.0] Title = "Right Wing" Guid = {E8675708-99D3-11DC-8F84-EECB55D89593} Description = View from the right wing looking at the cockpit Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.9 ShowWeather = Yes InitialXyz = 15.0, -0.45, 0.7 InitialPbh = 8, 0, 270 XyzAdjust = TRUE Category=Aircraft ClipMode=Minimum [CameraDefinition.1] Title = "Left Engine" Guid = {ed46e426-b8a1-44e0-99ff-37f701a79fe9} Description = View of the left engine and wing Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.50 ShowWeather = Yes InitialXyz = -4.0, -0.70, -2.8 InitialPbh = 4, 0, 15 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum [CameraDefinition.2] Title = "Tail" Guid = {b2a70645-cc8b-420d-bd79-9bf8d6774cbe} Description = Forward from front of the Tail Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = .5 ShowWeather = Yes InitialXyz = 0, 1.55, -7.5 InitialPbh = 10, 0, 0 XyzAdjust = TRUE Category=Aircraft MomentumEffect=TRUE ClipMode=Minimum [CameraDefinition.3] Title = "Landing Gear" Guid = {38daf937-ced1-4194-84a3-2dba888dc269} Description = Under left wing looking forward Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.5 ShowWeather = Yes InitialXyz = -2.0, -1.10, -4.3 InitialPbh = 10, 0, 2 XyzAdjust = TRUE Category=Aircraft MomentumEffect = FALSE ClipMode=Minimum [CameraDefinition.4] Title = "Nose" Guid = {ea126881-0ec6-40cf-b3ef-7651a2a92af3} Description = Rear view from nose Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = .5 ShowWeather = Yes InitialXyz = 0, 0.20, 9.2 InitialPbh = 12, 0, 180 XyzAdjust = TRUE Category=Aircraft MomentumEffect=FALSE ClipMode=Minimum [CameraDefinition.5] Title = "Front Gear" Guid = {96bdbc9e-3437-4d4b-9167-32a5c6b2b851} Description = Under fuselage looking forward Origin = Center SnapPbhAdjust = Swivel SnapPbhReturn = FALSE PanPbhAdjust = Swivel PanPbhReturn = FALSE Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.5 ShowWeather = Yes InitialXyz = 0, -2.80, 0.7 InitialPbh = 0, 0, 0 XyzAdjust = TRUE Category=Aircraft MomentumEffect = FALSE ClipMode=Minimum [CameraDefinition.001] Title = "Center Console" Guid = {1A299EAE-99D4-11DC-B26D-B4CC55D89593} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.80 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.35, -0.1, 0.0 InitialPbh=21, 0.0, 0.0 [CameraDefinition.002] Title = "Right Seat" Guid = {0456199A-99D4-11DC-B263-66CC55D89593} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.70 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.8, 0.00, 0.0 InitialPbh=0, 0, 0 [CameraDefinition.003] Title = "Overhead Front Left" Guid = {0879B67C-CA84-11DC-AE8E-093256D89593} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.60 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.2, -0.3, 0.0 InitialPbh=-63, 0.0, 0.0 [CameraDefinition.004] Title = "Overhead Front Right" Guid = {0879B67C-CA84-11DC-AE8E-093256D89595} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.60 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.6, -0.3, 0.0 InitialPbh=-63, 0.0, 0.0 [CameraDefinition.005] Title = "Overhead Aft" Guid = {882261FC-CA85-11DC-84AC-923B56D89593} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = None SnapPbhReturn = False PanPbhAdjust = None PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 1.00 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.39, -0.5, 0.0 InitialPbh=-70, 180, 180.0 [CameraDefinition.006] Title = "Test panel" Guid = {0456199A-99D4-11DC-B263-66CC55D89596} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.50 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=-0.1, -0.45, 0.2 InitialPbh=33, 0, 0 [CameraDefinition.007] Title = "Center Pedestal" Guid = {0456199A-99D4-11DC-B263-66CC55D89597} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.70 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.4, 0.00, -0.20 InitialPbh=68.5, 0, 0 [CameraDefinition.008] Title = "Batt panel" Guid = {0456199A-99D4-11DC-B263-66CC55D89598} Origin = Virtual Cockpit MomentumEffect = Yes SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = 0.60 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.6, -0.55, 0.0 InitialPbh=3, 0, 0 [CameraDefinition.009] Title = "Window view Left" Guid = {78D5E1D6-CA87-11DC-9B4C-724856D89593} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.80 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.00, -0.3, -3.9 InitialPbh=0.0, 0.0, -85.0 [CameraDefinition.010] Title = "To Cabin" Guid = {AB2295CC-CA86-11DC-A56C-9B4056D89593} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.80 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.45, -0.3, 0.5 InitialPbh=5.0, 0.0, 180.0 [CameraDefinition.011] Title = "Window view Right" Guid = {78D5E1D6-CA87-11DC-9B4C-724856D89594} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.80 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.88, -0.3, -3.9 InitialPbh=0.0, 0.0, 85.0 [CameraDefinition.012] Title = "Throttle view" Guid = {78D5E1D6-CA87-11DC-9B4C-724856D89001} Origin = Virtual Cockpit MomentumEffect = No SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = FALSE AllowZoom = TRUE InitialZoom = 0.80 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=20 HeadingPanRate=60 InitialXyz=0.0, 0.0, 0.0 InitialPbh=-20.0, 0.0, 90.0 edited out - problem persists Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 20, 2013 Author Share Posted August 20, 2013 and re-installed it again, added 1 skin, [FLTSIM.0] title =Aerosoft DHC-6 Series 300 Wheels sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =DIVER kb_checklists = kb_reference = atc_id =D-IVER atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Businesswings D-IVER" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [FLTSIM.1] title =Aerosoft DHC-6 Series 300 AKLAK AIR sim =DHC-6.300.W model =3bladewheelcargo panel = sound = texture =CGDHC kb_checklists = kb_reference = atc_id =C-GDHC atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Alak Air C-GDHC" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.2] title =Aerosoft DHC-6 Series 300 Solomon sim =DHC-6.300.W model =3bladewheelpax panel = sound = texture =H4FNT kb_checklists = kb_reference = atc_id =H4-FNT atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="Flysolomons H4-FNT" ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" [FLTSIM.4] title =Aerosoft DHC-6 Series 300 FEDEX Srs300 by Tom Weiss sim =DHC-6.300.W model =4bladewheelcargo panel = sound = texture =FEDEX Srs300 by Tom Weiss kb_checklists = kb_reference = atc_id =N38535 atc_parking_types =RAMP ui_manufacturer ="de Havilland Canada" ui_type ="DHC-6-300 Wheels" ui_variation ="FEDEX Srs300 by Tom Weiss" ui_typerole ="Twin Engine TurboProp" ui_createdby ="Aerosoft" [GENERAL] atc_type = DeHavilland atc_model = DHC6 performance = category = airplane same thing, did not load. Link to comment Share on other sites More sharing options...
Finn 873 Posted August 20, 2013 Share Posted August 20, 2013 Please check for the Hotfix002 here: http://forum.aerosoft.com/index.php?/topic/71897-hotfix002-for-104/?p=513834 Finn Link to comment Share on other sites More sharing options...
Tigerclaw 31 Posted August 20, 2013 Share Posted August 20, 2013 For the record, although it may not help. I just installed the complete 1.04 file (not the update), and did my usual copy/paste of repaints in the aircraft.cfg, plus my Panel.cfg edit for the RXP pop up window. I don't have 17 paints, but I do have 6 for the wheel version. ALL repaints showed up, and the floater, and the 2 Tundra. They were ALL selectable with no problems. Apart from the park brake issue, I guess I don't need the Hotfix002 I hope you get it sorted Tom. Link to comment Share on other sites More sharing options...
gr.eg 4 Posted August 20, 2013 Share Posted August 20, 2013 @TOM, I've said that fltsim.3 is missing... See upper please. And in your last shot too, a new time the problem with the line ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" 2 times needing to be cut. In the previous shots, you 've got many errors of that type: see fltsim # 1, 2, 6, 7 and 9 to 16... Please, correct everything in one time to be sure the reason is elsewhere... Thank you. @FINN, thank you for the fix. Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 21, 2013 Author Share Posted August 21, 2013 I added [Fltsim.3] title=Aerosoft DHC-6 Series 300 Flybe - Loganair sim=DHC-6.300.W model=3bladewheelpax panel= sound= texture=G-BVVK kb_checklists= kb_reference= atc_id=G-BVVK atc_parking_types=RAMP ui_manufacturer="de Havilland Canada" ui_type="DHC-6-300 Wheels" ui_variation="Flybe - Loganair" ui_typerole="Twin Engine TurboProp" ui_createdby="Aerosoft" which was deleted in the install 1.04 and edited the ui_typerole ="Twin Engine TurboProp" ui_createdby="Aerosoft" that made all the skins appear, so anyone making a copy of their skins probably will have the same problem thanks to the missing entry Link to comment Share on other sites More sharing options...
Tigerclaw 31 Posted August 21, 2013 Share Posted August 21, 2013 EDIT: Just noticed your Aircraft.cfg file. you don't have a [fltsim.3] entry, so it will stop at 2. You need to either ADD a fltsim.3 (another paint), OR renumber 4 to 3, 5 to 4, 6 to 5 etc. Also ALL the entries below the [General] section need to be ABOVE it. Then it will see all the paints You could've saved yourself quite a bit of time if you read my first post fully. But I'm glad you got it sorted in the end Link to comment Share on other sites More sharing options...
Tom_Weiss 42 Posted August 21, 2013 Author Share Posted August 21, 2013 true Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.