Bozman 5 Posted July 10, 2013 Share Posted July 10, 2013 Hi considering purchasing, can you tell me if its been tested on 3 monitors running a NVidia 680gtx in surround. ? Often I have to make alterations to the aircraft.cfg to get rid of the dreaded mouse spinning cursor, and on some planes this is not possible. Do Aerosoft provide a work around for this? Many thanks Steve Link to comment Share on other sites More sharing options...
Slayer 2 Posted July 10, 2013 Share Posted July 10, 2013 Seems to be working ok , windows can be resized. I haven't been through all the views yet to check for spinning cursor. I'll probably edit up a config so i don't have to resize windows EVERY time. Link to comment Share on other sites More sharing options...
Graeme Wright 4 Posted July 11, 2013 Share Posted July 11, 2013 Hi Bozman, Although I haven't had hours upon hours to test it at great length, I can confirm that for me it seems to be working okay as well. My set up is 2 x 680GTX 4GB in SLI for surround on three Dell U2711's, and I use TrackIR via EzDok. I'm using 320.49 release NVidia drivers. Graeme Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 11, 2013 Aerosoft Share Posted July 11, 2013 Hi considering purchasing, can you tell me if its been tested on 3 monitors running a NVidia 680gtx in surround. ? Often I have to make alterations to the aircraft.cfg to get rid of the dreaded mouse spinning cursor, and on some planes this is not possible. Do Aerosoft provide a work around for this? Many thanks Steve Steve, best use either support email or the forum, not both. Link to comment Share on other sites More sharing options...
Matt_Smith 1116 Posted July 11, 2013 Share Posted July 11, 2013 Hi considering purchasing, can you tell me if its been tested on 3 monitors running a NVidia 680gtx in surround. ? Often I have to make alterations to the aircraft.cfg to get rid of the dreaded mouse spinning cursor, and on some planes this is not possible. Do Aerosoft provide a work around for this? Many thanks Steve It works perfectly well on my system with 3 1920*1080 screens with 2 Nvidia 580's so see no reason why this would be different with a 680 which supports Nvidia surround without the need of SLI Link to comment Share on other sites More sharing options...
Bountyhunter 0 Posted July 11, 2013 Share Posted July 11, 2013 Got this great work of art last night and works fine at 5980 * 1080 (bezel corrected) over 3 screens on a gtx 680, frame rates are smooth. one question tho how do you resize the checklist ? it starts up rather big. Link to comment Share on other sites More sharing options...
Twinotter_Pilot 13 Posted July 11, 2013 Share Posted July 11, 2013 My two screens work perfectly :-) You can resize the check list simply with your mouse as you do with other windows. So just go to the the top or sides, your cursor should show two arrows going in opposite directions. Click on the top of the window. Hold and drag the window down. Link to comment Share on other sites More sharing options...
Bountyhunter 0 Posted July 11, 2013 Share Posted July 11, 2013 yes i know i can do that just wonder'd if there is a way to do it automatically ...im lazy Link to comment Share on other sites More sharing options...
Twinotter_Pilot 13 Posted July 11, 2013 Share Posted July 11, 2013 We are evaluating a fix for persons with two or more screens. Link to comment Share on other sites More sharing options...
Bountyhunter 0 Posted July 11, 2013 Share Posted July 11, 2013 brilliant ... until then I shall try not to be too lazy and use the old drag and shape method thanks Link to comment Share on other sites More sharing options...
Bozman 5 Posted July 11, 2013 Author Share Posted July 11, 2013 Many thanks all, looks like will be d/loading this weekend. Would be good customer service if developers advised on the release information if products were multi monitor compatible. There are a growing number of people using this now as the technology becomes affordable. It makes a difference to if I buy or not Thanks again Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 11, 2013 Aerosoft Share Posted July 11, 2013 Many thanks all, looks like will be d/loading this weekend. Would be good customer service if developers advised on the release information if products were multi monitor compatible. There are a growing number of people using this now as the technology becomes affordable. It makes a difference to if I buy or not Thanks again But two monitor systems are (as far as I know) always without problems. To be honest customers with three monitors are very very rare. Link to comment Share on other sites More sharing options...
Finn 873 Posted July 11, 2013 Share Posted July 11, 2013 I think it´s possible to setup special config files for that. I will be on vacation for appr. 3 weeks now, but will be happy to help setting up the required configs.I will need those of You with such systems to help though. Finn Link to comment Share on other sites More sharing options...
Matt_Smith 1116 Posted July 11, 2013 Share Posted July 11, 2013 Finn, when you get back off your vacation I will be more than happy to assist. Link to comment Share on other sites More sharing options...
Bozman 5 Posted July 11, 2013 Author Share Posted July 11, 2013 Me too, once I buy, hopefully this weekend if I get the time Thanks Link to comment Share on other sites More sharing options...
Slayer 2 Posted July 11, 2013 Share Posted July 11, 2013 I'm getting what appears to be TDR errors in full screen whenever I mouse over the checklist or the views. Possibly a driver issue or some obscure FSX problem. Screens go completely black and video driver resets but as I said only in full screen and only when I mouse over or click the view selector or checklist. Link to comment Share on other sites More sharing options...
Bountyhunter 0 Posted July 12, 2013 Share Posted July 12, 2013 Finn I am also at your service if you need me to test any config Link to comment Share on other sites More sharing options...
Bozman 5 Posted July 13, 2013 Author Share Posted July 13, 2013 Well made the purchase, Nice in in 3 monitor mode ;-) I do however get the spinning flashing cursor if I select the forward view with no VC ie in the main normal VC view and press "shift a" Just have to remember to avoid this view ! Checklist is rather large,not a big issue as can resize, but if you do a workaround to keep the resize would be nice, but not a big issue as only have to do it once each flight. I have the Antartica x Otter, just a slight improvement ! Cheers Link to comment Share on other sites More sharing options...
aeugli 1 Posted July 13, 2013 Share Posted July 13, 2013 Same here with the spinning cursor when choose forward view with no VC. All other views work like a charm in 3 monitor mode! Smaler ( constant resized) checklist would be nice. Cheers Rainer BTW fantastic aircraft; fine piece of work/art!!! Link to comment Share on other sites More sharing options...
Matt_Smith 1116 Posted July 13, 2013 Share Posted July 13, 2013 Same here with the spinning cursor when choose forward view with no VC. All other views work like a charm in 3 monitor mode! You might be able to remove this view from cameras.cfg I believe it to be the following entry: [CameraDefinition.001] Title = Cockpit Guid = {B1386D92-4782-4682-A137-738E25D1BAB5} Description = This is the description of the cockpit view Origin = Cockpit ShowPanel = Yes SnapPbhAdjust = Ordinal SnapPbhReturn = True PanPbhAdjust = Ordinal PanPbhReturn = True Track = None ShowAxis = FrontOnly AllowZoom = TRUE InitialZoom = 1.0 SmoothZoomTime = 2.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit HotKeySelect=2 You might just be able to change the showpanel = yes to no, as its usually caused by trying to load an image that wont display correctly at high resolutions found on 3 screen setups. Of course you could just removed the whole definition. If you want to try this please do make a backup copy of your cameras.cfg in case it screws up your simulator. I'm not responsible for attempts at this which break your FSX/P3D installation. Link to comment Share on other sites More sharing options...
Bozman 5 Posted July 13, 2013 Author Share Posted July 13, 2013 Many thanks Matt, yes ideally would like to remove it, not sure which one it is though as the descriptions are as follows, so will wait for Aerosoft to post a suggestion for which one. really nice plane, glad I took the decision to buy it ! Title = "Center Console" Title = "Right Seat" Title = "Overhead Front Left" Title = "Overhead Front Right" Title = "Overhead Aft" Title = "Test panel" Title = "Center Pedestal" Title = "Batt panel" Title = "Window view Left" Title = "To Cabin" Title = "Window view Right" Title = "Throttle view" Link to comment Share on other sites More sharing options...
Matt_Smith 1116 Posted July 13, 2013 Share Posted July 13, 2013 Many thanks Matt, yes ideally would like to remove it, not sure which one it is though as the descriptions are as follows, so will wait for Aerosoft to post a suggestion for which one. really nice plane, glad I took the decision to buy it ! Title = "Center Console" Title = "Right Seat" Title = "Overhead Front Left" Title = "Overhead Front Right" Title = "Overhead Aft" Title = "Test panel" Title = "Center Pedestal" Title = "Batt panel" Title = "Window view Left" Title = "To Cabin" Title = "Window view Right" Title = "Throttle view" If you get rid of [CameraDefinition.001] Title = Cockpit Guid = {B1386D92-4782-4682-A137-738E25D1BAB5} Description = This is the description of the cockpit view Origin = Cockpit ShowPanel = Yes SnapPbhAdjust = Ordinal SnapPbhReturn = True PanPbhAdjust = Ordinal PanPbhReturn = True Track = None ShowAxis = FrontOnly AllowZoom = TRUE InitialZoom = 1.0 SmoothZoomTime = 2.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit HotKeySelect=2 From your cameras.cfg that them removes the view from the shift a key press sequence. Just for your interest you can also remove things like tower view using the same method. Of course back up cameras.cfg before hand incase you get carried away and remove the VC view Link to comment Share on other sites More sharing options...
Bozman 5 Posted July 13, 2013 Author Share Posted July 13, 2013 Matt , I understand now where you mean to change I was looking in the aircraft cfg. You are a genius, not only has it worked on this, but also on two other VERY highly respected companies aircraft I have, neither of which came up with a solution when I logged support with them, You have solved it perfectly, no more aborting flights after an accidental press of the view key and I can cycle through all my view without worrying about selecting it accidently. Thank you very very much !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Steve Link to comment Share on other sites More sharing options...
Matt_Smith 1116 Posted July 14, 2013 Share Posted July 14, 2013 Matt , I understand now where you mean to change I was looking in the aircraft cfg. You are a genius, not only has it worked on this, but also on two other VERY highly respected companies aircraft I have, neither of which came up with a solution when I logged support with them, You have solved it perfectly, no more aborting flights after an accidental press of the view key and I can cycle through all my view without worrying about selecting it accidently. Thank you very very much !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Steve My pleasure Steve, it was bloody annoying when that happened to the cursor. If I hadn't have seen your post I wouldn't bothered investigating in on my install of P3D By deleting the 001 camera defition you remove it from all aircraft. Of course you can still get the view back by right clicking in the sim itself. I've done it with all the view I never use and just have the VC and locked spot. Link to comment Share on other sites More sharing options...
aeugli 1 Posted July 14, 2013 Share Posted July 14, 2013 Thanks Matt for that tip! Adding the line CycleHidden = True under [CameraDefinition.001] do the same trick. That´s a tip from Tim over in the ORBX forums (long ago). Cheers Rainer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.