messirules700 0 Posted March 12, 2013 Share Posted March 12, 2013 I recently bought the airbus x extended box version. I downloaded it by what the manual said and it seemed to work fine. Then when i put my plane into cold and dark state i wasnt able to turn on the external power. Also on the right MCDU i wasnt able to use the checkilst, and i also wasnt able to move the throttle (logitech attack 3). So please help me. Thank you Link to comment Share on other sites More sharing options...
Cheyenne Chief Pilot 829 Posted March 12, 2013 Share Posted March 12, 2013 Did you try switching ext. power to 'ON' on the overhead panel? There's a switch reading 'ext pwr AVAIL' (or similar). You have to press it (left mouse click) to make it read 'ext pwr ON' (or similar). Next step is to switch both batteries on (on the overhead panel, too): They both read 'off' in cold&dark state. Press both switches (left mouse clicks, too). You need to have external power AND BOTH batteries on first to power up your AXE. Link to comment Share on other sites More sharing options...
LapCheong 45 Posted March 12, 2013 Share Posted March 12, 2013 Please read the manual guess you dun To in order for checklist to work. You must be in C&D, taxi state or take off option in the right MCDU. So you are in C&D can you confirm front left door and packing chokes set? If so the EXT pwr on the overhead should light up. For throttle make sure you select SINGLE THROTTLE. Am using 3d pro no problem. And in fsx control, throttle is set to engines. If it still cant be fix, post your throttle here http://forum.aerosof...iverse-systems/ And check out my channel did a few tutorial http://www.youtube.c...ser/IAmniceify1 Feel free to post back if it din help Goodluck ! Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 12, 2013 Author Share Posted March 12, 2013 thank you IAmNice3fy , but it didnt work. this is what my screen looks like when i put my A320 into C&D sate. Link to comment Share on other sites More sharing options...
Cheyenne Chief Pilot 829 Posted March 12, 2013 Share Posted March 12, 2013 thank you Airbus X extended , but it didnt wor. this is what my screen looks like when i put my A320 into C&D sate. You need to upload your screenshot again. It doesn't show here yet, so I guess something went wrong during your upload ... Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 12, 2013 Author Share Posted March 12, 2013 sorry i am new so i dont know how to add screenshots Link to comment Share on other sites More sharing options...
Cheyenne Chief Pilot 829 Posted March 12, 2013 Share Posted March 12, 2013 sorry i am new so i dont know how to add screenshots Just click 'Use Full Editor'. A 'Click To Attach Files' will display. You may convert the FSX screenshots (generated by the "V"-command) to *.jpg before you upload them ... Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 12, 2013 Author Share Posted March 12, 2013 first one is of my pjane in C&D State(no ext. power sign) Second one is of when i turn on battery 1 Third one is how the checklist option doesnt turn on Link to comment Share on other sites More sharing options...
rjord 86 Posted March 12, 2013 Share Posted March 12, 2013 Did you start battery 2? Link to comment Share on other sites More sharing options...
rjord 86 Posted March 12, 2013 Share Posted March 12, 2013 For the checklist to work you also need to make sure the front left door is open. Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 12, 2013 Author Share Posted March 12, 2013 so i start up both battries then in open the front left door? Link to comment Share on other sites More sharing options...
rjord 86 Posted March 12, 2013 Share Posted March 12, 2013 The steps I follow in order. 1.. turn batt 1 and 2 on 2.. turn on ext power 3.. start align of IRS GPS 4.. open front left door using MCDU option ACFT DOORS 5.. Turn on pilot and copilot using OPTIONS/CHECKLIST and make sure pilot and copilot are on in Green Roy Link to comment Share on other sites More sharing options...
rjord 86 Posted March 12, 2013 Share Posted March 12, 2013 This is covered in the documentation for the airbus x extended Vol6 - Stepbystep . Page 29 Section 5.2 Basic Preperation Procedure. The only thing I do differently is the first line for Fuel planner I generally do that when I have entered my route. So in my case I would start with No 2 I don't see in the procedure where the front door is opened but I generally open the door at the beginning to let the passengers on while I am setting up the cockpit. Roy Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 12, 2013 Author Share Posted March 12, 2013 still doesnt work. Link to comment Share on other sites More sharing options...
rjord 86 Posted March 13, 2013 Share Posted March 13, 2013 When you start the airbus, does it default to cold and dark ........ when you go to the load aircraft screen the top left option is what you would select to load the cold and dark state if your aircraft is not already at that state. To make it cold and dark by default, click on the top right option where it states Set Def and this will make it cold and dark by default.(Def highlghts in Green) I always start with my airbus automatically loading as cold and dark. (By the way, if you load another state such as ready to taxi, does the checklist work?) The other issue you may have is an issue with the default flight for FSX.....once I saw this was corrupted and effected my airplane and other payware. What you can do is create a new flight,for example with a small aircraft as your default plane. Then save the flight as the default flight without loading the airbus. Restart FSX, load up the default flight and then switch aircraft to the Airbus x extended in default cold and dark state as shown above and see if this works. Are you also following the step by step by step guide? In your 3rd screenshot it did not look like you had the ECAM screen active. Do you know what version of the airbus x extended you are on. Maybe you have not updated to the latest version 1.4 yet. If all else fails, have you tried uninstalling the airbus and then reinstalling. Maybe there was an issue during the install? I have seen other issues being resolved by simply doing a reinstall. If that still does not work, perhaps a couple of other screenshots may be needed. When you get to the stage of the checklist not working, can you go into ACFT DOORS and show a screenshot of the DOORS screen. Perhaps there is an issue here. Could you then go to Options screen. If You are unable to click on Checklist from there, print screen the Options screen showing the Checklist option disabled in Options. If you can access Options / checklist, can you screenprint the CHECKLIST OPTIONS screen which should show the same screen as shown on page 24 of the Stepbystep guide. Roy Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 13, 2013 Author Share Posted March 13, 2013 Where do I find this options page to allow chrcklist Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 13, 2013 Author Share Posted March 13, 2013 I have cold and dark as my default and could u give me ur step by step cockpit preparation please. Thank you for all your help Link to comment Share on other sites More sharing options...
rjord 86 Posted March 13, 2013 Share Posted March 13, 2013 have you found the stepbystep guide which comes with the airbus.......it gives step by step instructions in a tutorial flight. As i mentioned in my comment above (comment #13) start at page 29 for the cockpit preperation steps. To learn how to startup and fly the airbus you need to go through this manual from front cover to back cover at least once. I went throught it at least 3 timesbefore i could takeoff and land successfully. Roy Link to comment Share on other sites More sharing options...
Cheyenne Chief Pilot 829 Posted March 13, 2013 Share Posted March 13, 2013 The steps I follow in order. 1.. turn batt 1 and 2 on 2.. turn on ext power 3.. start align of IRS GPS 4.. open front left door using MCDU option ACFT DOORS 5.. Turn on pilot and copilot using OPTIONS/CHECKLIST and make sure pilot and copilot are on in Green Roy Sorry, was offline for a while. In the defined C&D state you don't see the batt 'OFF' lights until you switch on ext. power. So I would do step 2 before step 1. In the defined C&D state the front left door is open already. So messirules700's user-defined startup state is not exactly the C&D state predefined by Aerosoft. messirules700 doesn't have ext power ready to turn on. So there probably is something amiss in messi's startup state. I have no experience in troubleshooting that. Maybe starting from a Aerosoft-defined state would be worth a test, just to find out whether the installation works as it's supposed to do. Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 13, 2013 Author Share Posted March 13, 2013 how do i align IRS GPS Link to comment Share on other sites More sharing options...
LapCheong 45 Posted March 13, 2013 Share Posted March 13, 2013 Rwad step by step please Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 13, 2013 Author Share Posted March 13, 2013 What? IAmNice3fy Link to comment Share on other sites More sharing options...
rjord 86 Posted March 14, 2013 Share Posted March 14, 2013 He made a typo....... he said read step by step. messirules Every game or simulator comes with an instruction manual and the airbus x extended is no different. You need to read the step by step guide which shows you the steps to flying the airbus. Have you found the step by step guide which is a pdf document which came with the airbus? This is the only way of learning how to start up the airbus , fly it and land it. There are 7 volumes (manuals) that come with the airbus and you need to at least read Vol6-StepbyStep EN.pdf If you do that you will be flying the airbus in no time and know the cockpit start procedure and where to align the IRS among other things. Roy Link to comment Share on other sites More sharing options...
messirules700 0 Posted March 14, 2013 Author Share Posted March 14, 2013 I have, but it still doesn't work. If I can't get the ext power then everything just messes up. Also I can't move the airplane because I have no throttle control Link to comment Share on other sites More sharing options...
Cheyenne Chief Pilot 829 Posted March 14, 2013 Share Posted March 14, 2013 I have cold and dark as my default and could u give me ur step by step cockpit preparation please. Thank you for all your help I have, but it still doesn't work. If I can't get the ext power then everything just messes up. Also I can't move the airplane because I have no throttle control Just meant as a suggestion: How did your AXE work before you defined C&D as your default startup state? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.