Zoomy112 2 Posted March 10, 2013 Share Posted March 10, 2013 Hallo zusammen ich habe mir mein gesamter x-plane10 neu installiert und den B777 natürlich auch aber seit dem kommt immer sobald ich mein kay activieren will immer erro activating aircraft!!!! 10mal neu installiert 10mal neu versucht mein kay einzugeben keine chance 10mal nachgeschaut ob ich mich verschrieben kein chance habe auch versucht über web seite zu activieren keine chance!!! was kann ich jetzt mnoch machen!!! Link to comment Share on other sites More sharing options...
Flo1984fish 29 Posted March 10, 2013 Share Posted March 10, 2013 Nabend du kannst bei solchen problemen Phillip direkt anschreiben. Er antwortet eigentlich auch immer sofort. Aber wenn ich mich nicht täusche ist er grad im urlaub... Gruss Flo Link to comment Share on other sites More sharing options...
Flo1984fish 29 Posted March 10, 2013 Share Posted March 10, 2013 Nabend du kannst bei solchen problemen Phillip direkt anschreiben. Er antwortet eigentlich auch immer sofort. Aber wenn ich mich nicht täusche ist er grad im urlaub... Gruss Flo mail@philippmuenzel.de Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted March 11, 2013 Administrator Share Posted March 11, 2013 Die Mail für den Key Support der B777 bei Philipp ist : 777support@philippmuenzel.de (Manual Seite 6). Gruß Link to comment Share on other sites More sharing options...
Zoomy112 2 Posted March 11, 2013 Author Share Posted March 11, 2013 ok grade an in geschrieben danke Link to comment Share on other sites More sharing options...
Zoomy112 2 Posted March 11, 2013 Author Share Posted March 11, 2013 also ich habe veruscht 3mal an den zu schriben das die mein key ressetten sollten aber 3 mal kam das hier Dear Customer, Thank you for your question/report. The 777 support team will be glad to get back to you on your request, or post a comment in the 777 support forum if the issue you describe may concern other users. Please note that the answer you are looking for might already be posted on the forum or may be present in the following FAQ list. If this is so, no further response from the support team will be necessary. Make sure to see the topics in the forum http://forums.x-plane.org/index.php?showforum=152 Q: XP gets stuck when loading the 777. A: The 777 Worldliner requires a Java runtime for the electronic flight bag. Please see the manual.pdf in the DOCs folder for a download link and instructions. Q: XP is stuck or the cockpit has dark screens after activating the 777. A: After the first activation, you have to completely RELOAD the plane once. Q: XP locks up with scratching or squeaking sound A: The 777 Worldliner uses the SASL plugin to generate a 3D sound environment. The sound module is known to conflict with the Gizmo plugin by X-Aviation. If you have the Gizmo plugin installed, you have to deactivate it prior to loading X-Plane for a 777 session. Q: My sounds squeak and I don't have Gizmo installed. A: The 777 Worldliner uses openAL. It is possible that openAL is not installed on your computer or the version is not correct. Please try reinstalling it from http://connect.creativelabs.com/openal/Downloads/oalinst.zip Q: The quick zoom commands get stuck. A: The quick zoom is not to be used with "Cinema Verité" camera model. Please make sure this option is not on. Q: My engines throttle back from takeoff power during the takeoff roll or they throttle back erratically during climb. A: The 777 autothrottle system in reality has motorized throttle levers that always travel to the position commanded by the autothrottle. However, your home joystick or flightjoke doesn't have motorized throttles, so the position of your throttle lever and the lever in X-Plane might differ. During takeoff, at 85 knots, a mode called "HOLD" activates where in reality the servo motors of the autothrottle disconnect to allow for an easy takeoff abort. If your joystick is sending "noise" now, the throttles will jump back. Also, your joystick might interfere with the "THR" and "THR REF" modes during VNAV managed climbs or descends. Our suggestion is to have the joystick throttle safely parked at the lower end position during the time autothrottle is engaged. Make sure your joystick iss properly calibrated, with a sufficient dead zone at the lower end, so it is not sending any noise. Q: My screen gets blue and I hear a clattering sound A: Your virtual self is about to die from freezing - please read the manual how to configure the pressurization and air-conditioning system to have life-supporting conditions in the cabin Q: I can't get the FMS to display on my iPad. A: Please see the Howto.pdf in the DOCs folder, especially the last paragraph on the last page. Your X-Plane computer and your iPad must be in the same network. Q: I get the message "UNABLE CRZ ALT" or "UNABLE NEXT ALT" in the FMS A: You are probably too heavy to reach the desired cruise altitude or your flightplan is too short to stay at cruise altitude long enough. Select a lower cruise altitude and consult the manual on the concept of "Step Climbs". Q: I get "VSPEEDS UNAVAILABLE" on takeoff calculation A: Your V1 is too low for a safe takeoff at the selected power setting in case of an engine failure. Select a lower takeoff power and consult the manual on the concept of "V1MCG" or "minimum control ground speed". Q: My MCP is showing nonsense values for the autopilot, like TRK/HDG at the same time. A: After a plane crash or reposition, the plugins might get out of sync. Just reload the plane in this case. Also make sure you have no plugins or devices sending commands to the X-Plane default autopilot, as they can destroy the logic of the 777 autopilot. Q: I'm flying on track, but X-Plane 10 ATC keeps telling me I'm off course. A: The X-Plane 10 ATC has no idea of the complex terminal procedures supported by the 777. If you want ATC support for that, try an online-flying network like VATSIM, IVAO or PilotEdge. Q: I can't board passengers or load fuel onto the plane. A: Your engines must be off, the parking brake set, the doors disarmed and opened, the fuel truck and the passenger bus must be summoned before you can board fuel, cargo or passengers. Q: Pushback doesn't work when engines are running. A: As in reality, it is not recommended to have the engines started before pushback is initiated. Q: I'm on Mac and I can't open the Menu by Shift-F11. Nothing happens, or I get a slow-motion Exposé. A: By default, on Mac keyboards, the F-keys are mapped to OSX-specific functions. You must either press the Fn-key with the F-Keys or change this setting. On some versions of OSX, a function might be mapped to Fn-Shift-F11, like Exposé. In that case, use X-Plane Settings to change the keyboard command for "Custom Slider 11". was will er von mir mein englisch ist total miss verstehe da kein wort und so weiter!!!! Link to comment Share on other sites More sharing options...
Zoomy112 2 Posted March 11, 2013 Author Share Posted March 11, 2013 und ausser dem steht da nichts bei wie man den key reseten lasse kann oder so Link to comment Share on other sites More sharing options...
Zoomy112 2 Posted March 11, 2013 Author Share Posted March 11, 2013 nochmal mail da hingeschrieben und wieder den gleiche antwort erhalten man das kann doch echt nicht war sein moechte endlich wieder den b777 spielen!!! selbts bei http:activate.1-sim.com kommt immer das gleiche Invalid key or no more activations left. obwohl ich nicht bekommen habe man das regt mich langsam aber sicher auf Link to comment Share on other sites More sharing options...
flyingDavid 1 Posted March 11, 2013 Share Posted March 11, 2013 Also soweit Ich den ersten Absatz der E-Mail richtig verstehe steht dort nur dass sie sich freuen auf dich zurückzukommen, oder Sie die Lösung des Problems ins Forum schreiben falls es viele Leute betrifft. Ich würde also einfach ein paar Tage warten, das 777 Support Team hat vermutlich einfach sehr viel zu tun im Moment. LG David Link to comment Share on other sites More sharing options...
Brownsen 5 Posted March 12, 2013 Share Posted March 12, 2013 Die sind oder waren gerade Skifahren. Die Mail, die du bekommrn hast sieht nach einem Autoreply aus. Mit dieser Antwort wollen sie sichergehen, daß du nicht nach einem Problem fragst, welches schon in der FAQ abgehandelt wurde. Hab etwas Geduld, die melden sich schon. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.