vjeanmarc 0 Posted March 13, 2013 Share Posted March 13, 2013 But the arrival "follow me" chose a location occupied ... I can change that? Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted March 13, 2013 Share Posted March 13, 2013 But the arrival "follow me" chose a location occupied The arrival followme does not choose positions on its own. You choose the position from the menu (based on AFCAD). So contact ground after landing, request 'taxi to the gate' and then request AES car via its menu to guide you to that exact gate you are offered by ATC Link to comment Share on other sites More sharing options...
vjeanmarc 0 Posted March 14, 2013 Share Posted March 14, 2013 Thank you Rafal Haczek Link to comment Share on other sites More sharing options...
JarkkoK 0 Posted March 16, 2013 Share Posted March 16, 2013 Is AES 2.31 coming? Link to comment Share on other sites More sharing options...
Calmundo 14 Posted March 17, 2013 Share Posted March 17, 2013 Is AES 2.31 coming?Yes, absolutely correct - 2.30 should be followed by 2.31! Do you really think there will be a new version only a couple of days after the release of the current one? Not really ... Link to comment Share on other sites More sharing options...
Ruhrpilot07 15 Posted March 17, 2013 Share Posted March 17, 2013 Yes, absolutely correct - 2.30 should be followed by 2.31! Do you really think there will be a new version only a couple of days after the release of the current one? Not really ... Zeitweise ist man ja glücklich zu sehen, dass abseits normaler Büroarbeitszeiten (btw, das kann auch mal jemand NEU definieren) sich hier jemand zeigt von dem man annehmen kann, daß er/sie die Sprache aus dem Ursprungsland des Unternehmens spricht. Back on topic. It took me some time to find out my individual settings with MA EDDL fsx. If these settings don't have to be changed after my next landing at EDDL, then I'll try the next step, downloading the AES version of March 17th, 2013. "Which airports benefit with AES?" was a good question when I've bought my first credits. I'd say it depends on your HomeAirport... Link to comment Share on other sites More sharing options...
gussgull 0 Posted March 22, 2013 Share Posted March 22, 2013 hi aerosoft thank you for your work on aes 2.30 i was thinking of getting gex for my ground crew services becouse as far as i new aes did not have moveing people also another key factor is you can have belt loaders load on the left and right side of aircraft i think. As i am a dash 8 q400 virtual pilot (home cockpit ) and am awaiting ther release of the majestic dash 8 q400 will aes 2.30 work with the dash 8 as they only need the beltloaders from the left side of aircraft any info would be very much apprishiated i no one day we will see virtual passangers getting on the bus to go to terminal and to the aircraft and baggage carts etc so thank you aes 2.30 Link to comment Share on other sites More sharing options...
cgentil 163 Posted March 25, 2013 Share Posted March 25, 2013 Hi Oli, Any news about de-ice spray? Now spray looks green triangles... Thanks. Link to comment Share on other sites More sharing options...
nickac1092 8 Posted March 30, 2013 Share Posted March 30, 2013 Hi Oli, Any news about de-ice spray? Now spray looks green triangles... Thanks. Its not meant to look good on the inside. Only from spot view..... That's why there is triangles..... Link to comment Share on other sites More sharing options...
StigAndre7 0 Posted April 1, 2013 Share Posted April 1, 2013 Tried out the GSX demo for some time now and I must say it could be better...Assuming AES is the One and Only for many..? Link to comment Share on other sites More sharing options...
WebMaximus 320 Posted April 1, 2013 Share Posted April 1, 2013 Tried out the GSX demo for some time now and I must say it could be better...Assuming AES is the One and Only for many..? I've been using AES for quite some time now. I did buy GSX when it was released but I quickly went back to AES where everything just works out of the box so to speak. Link to comment Share on other sites More sharing options...
StigAndre7 0 Posted April 2, 2013 Share Posted April 2, 2013 I've been using AES for quite some time now. I did buy GSX when it was released but I quickly went back to AES where everything just works out of the box so to speak. Nice to know, thanks:) Link to comment Share on other sites More sharing options...
mishaairbus 1 Posted April 19, 2013 Share Posted April 19, 2013 Hello, Oliver! I was Really excited by 2.30 version, and I wonder if it would be possible, if baggage loaders and container loaders could come together, coz it would be realistic if they would load luggage in one cargo door, and containers with other) (I hope those would be added in future). And I like the Idea with busses, running terminal-parking stand rte. Link to comment Share on other sites More sharing options...
Eduard Gasull 258 Posted May 20, 2013 Share Posted May 20, 2013 Hey guys, i have a problem with AES 2.30 . when im going to put parameters on airplanes or other configuration stuff on ads help appears a message that says "open from the pad" i knows that i have to go to programs files/ MG/FSX/aerosoft/aes and open aes confing. But its son uncomfortable DO YOU NOW HOW I CAN FIX IT, to use normally? i know tha you have to repair some data files but i've no idea where i can download this data files or fix VTBS in fax AES 2.30 files Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted May 22, 2013 Author Developer Share Posted May 22, 2013 Hey guys, i have a problem with AES 2.30 . when im going to put parameters on airplanes or other configuration stuff on ads help appears a message that says "open from the pad" i knows that i have to go to programs files/ MG/FSX/aerosoft/aes and open aes confing. But its son uncomfortable DO YOU NOW HOW I CAN FIX IT, to use normally? i know tha you have to repair some data files but i've no idea where i can download this data files or fix VTBS in fax AES 2.30 files This is generated, because you installed the FSX into the program files folder, so AESHelp must start in ADMIN Mode to be able to handle files there, but when AESConfig whould started by AESHelp it run too in ADMIN Mode and could not connect to the FSX start normal. Place a Shortcut of the AESConfig.EXE to you desktop and so you can easy start AESConfig directly and this has the benefit, that you don't need to wait, until AESHelp has loaded all the other stuff. So it is much more comfortable then via AESHelp. Link to comment Share on other sites More sharing options...
Eduard Gasull 258 Posted May 26, 2013 Share Posted May 26, 2013 thanks opabst Link to comment Share on other sites More sharing options...
muzik4ever183 11 Posted May 29, 2013 Share Posted May 29, 2013 Hey hey! Am I the only one who checks the site like 10 times a week in fear that I'm the last one to download 2.31 ?!?! lol The anticipation is killing me! I've become DEPENDENT on AES for my simming realism needs! hahaha Well done, Opabst! Keep up the good work! --Very Satisfied and Loyal Customer-- Link to comment Share on other sites More sharing options...
IBE6651IBE6650 2 Posted June 12, 2013 Share Posted June 12, 2013 x.x Link to comment Share on other sites More sharing options...
gporzio 0 Posted June 13, 2013 Share Posted June 13, 2013 Apologies for my prior post. AES and JFK v2 problem solved! Link to comment Share on other sites More sharing options...
Airbusboeing2012 2 Posted July 10, 2013 Share Posted July 10, 2013 Hallo da draußen, sehr schöne neue Features in v2.3. Aber wie wärs mal mit der Möglichkeit Frachtmaschinen (Cargo ... ) mit AES zu versorgen. Und zwar nicht mit dem normalen Fuhrpark (weil ich weiß nicht wozu eine Frachtmaschine Catering/Cleaning braucht), sondern komplett neuem Equipment (z.b. für die Nase von einer 747-400F/ -8F). Man könnte doch z.b. bei der Konfiguration angeben, ob es sich um ein Passagier- oder Frachtflugzeug handelt. Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted July 10, 2013 Share Posted July 10, 2013 Hello, Airbusboeing2012 This is an English language forum. There is a German one for AES too if you prefer communicating in German. Hallo da draußen, sehr schöne neue Features in v2.3. Aber wie wärs mal mit der Möglichkeit Frachtmaschinen (Cargo ... ) mit AES zu versorgen. Und zwar nicht mit dem normalen Fuhrpark (weil ich weiß nicht wozu eine Frachtmaschine Catering/Cleaning braucht), sondern komplett neuem Equipment (z.b. für die Nase von einer 747-400F/ -8F). Man könnte doch z.b. bei der Konfiguration angeben, ob es sich um ein Passagier- oder Frachtflugzeug handelt. And this time a help from Google Translator for the non-German speakers around: Hi there,very nice new features in v2.3.But how about times with the possibility of cargo aircraft (cargo ...) to provide them with AES. And not with the normal fleet (because I do not know what a cargo plane Catering / Cleaning needs), but also completely new equipment (for example, the nose of a 747-400F /-8F). Could not they e.g. specify when you configure whether it is a passenger or cargo aircraft Link to comment Share on other sites More sharing options...
renesp 5 Posted July 11, 2013 Share Posted July 11, 2013 Hello Aerosoft Developers, "The loading process and entering passengers is not yet finished and will follow later"...this was mentioned around 22 February`13 if I am not mistaken. Is there a chance to give us an indication of a possible release date for this update? Thank you and best regards, Rene Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 11, 2013 Aerosoft Share Posted July 11, 2013 We have no new information about this right now. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted July 11, 2013 Author Developer Share Posted July 11, 2013 http://forum.aerosoft.com/index.php?/topic/68238-next-aes-version/?p=503032#entry503032 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.