Deputy Sheriffs jrotaetxe 242 Posted December 24, 2012 Deputy Sheriffs Share Posted December 24, 2012 Ok, perhaps is the right place to post this. Related with the TOD issues, once entered the arrival, and sfter resolving the discontinuities, this happened... Once RUMBA reached, AP went mad and began doing circles. No way to enter again in a managed navigation. Regards and Merry Christmas Link to comment Share on other sites More sharing options...
cbd80 258 Posted December 24, 2012 Share Posted December 24, 2012 Thanks for bringing this to our attention and we will certainly look into the issue. Could you please provide us with your full flight plan? Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted December 25, 2012 Author Deputy Sheriffs Share Posted December 25, 2012 For Sure. SBGR UZ23 BHZ UZ16 POSMU UZ36 SVD UZ10 RUMBA SBNT Performed TEXAS1A SID, from Rwy 09L Reaching ZIPAR, more or less, select ILS SBNT16L, via NT363. Perhaps you can shorten the flight departing from SVD. Merry Christmas Link to comment Share on other sites More sharing options...
Omar Al-Safi 60 Posted December 30, 2012 Share Posted December 30, 2012 Hi guys, It happened to me also today, here is my flight plan: OYAA DCT LADLI UM651 ATBOT UL564 SHA UM318 PURDA UL564 MIGMA DCT OTBD At OTBD, I choose ILS34 via ALTOT to form the arc, check the charts here: http://vatme.net/files/VATBAH/OTBD.pdf Thanks a lot Link to comment Share on other sites More sharing options...
Omar Al-Safi 60 Posted December 30, 2012 Share Posted December 30, 2012 Please check the screenshot for the way to reproduce this issue (indeed the route disconnecorty should occur after MIGMA) but I didn't have time to fly again with the same route but perhaps this issue is always occurring when I select 'VIA ALTOT' per the screenshot: Thanks a lot! Link to comment Share on other sites More sharing options...
Deputy Sheriffs jrotaetxe 242 Posted December 30, 2012 Author Deputy Sheriffs Share Posted December 30, 2012 Hi, Omar... This issue (at least, the problem I had with NT363) has been solved in version 1.02c.... Are you using the last revision? Regards Link to comment Share on other sites More sharing options...
Omar Al-Safi 60 Posted December 31, 2012 Share Posted December 31, 2012 Hi, Omar... This issue (at least, the problem I had with NT363) has been solved in version 1.02c.... Are you using the last revision? Regards Yes I did, it seems this issue happens with some routes Link to comment Share on other sites More sharing options...
Omar Al-Safi 60 Posted January 12, 2013 Share Posted January 12, 2013 Hi AS team, Just a heads up on this, today I had a flight with the same route and I'm happy to say all the route issues that I had before are completely gone You can close this thread . Thanks a lot ! Link to comment Share on other sites More sharing options...
KyleD 1027 Posted January 12, 2013 Share Posted January 12, 2013 Thanks for letting us know Omar, enjoy! Link to comment Share on other sites More sharing options...
Fernando Cesar 0 Posted February 2, 2013 Share Posted February 2, 2013 Guys, some help please .... Today this problem occurred twice. Route 1: TAM3775 A320 / M - SBCG - N0454 - FL350 - UZ22 - RORAX - DCT - AAQ - DCT - SBSP Route 1: After going through "AAQ" line to the airport disappeared. I have the print screen. Route 2: TAM3716 A320 / M - SBSP - N0450 - FL370 - UZ2 - ARX - DCT - DCT- MOVTO - SBBR Route 2: after "MOVTO" line disappeared. follows the print. Honestly, I do not know if I did something wrong. https://skydrive.live.com/redir?resid=50A4D453BCA5CDB9!1701&authkey=!AEclQ1z2FrPf5U8 https://skydrive.live.com/redir?resid=50A4D453BCA5CDB9!1700&authkey=!AK1qqUNSLi1qJXQ V104 Fernando Cesar Link to comment Share on other sites More sharing options...
welchb21 20 Posted February 3, 2013 Share Posted February 3, 2013 It appears you didnt enter an Arrival runway, try choosing the runway and see if that solves the issue. Link to comment Share on other sites More sharing options...
KyleD 1027 Posted February 3, 2013 Share Posted February 3, 2013 Guys, some help please .... Today this problem occurred twice. It appears you didnt enter an Arrival runway, try choosing the runway and see if that solves the issue. That does seem to be the cause and the solution. Please check that next time. Link to comment Share on other sites More sharing options...
Fernando Cesar 0 Posted February 3, 2013 Share Posted February 3, 2013 That does seem to be the cause and the solution. Please check that next time. I fly off line, with the default FSX ATC. So always expect ATC to inform airport runway landing. Normally even without selecting a track, the green line goes up to the airport. But these two routes I did today, that did not happen. When selected the runway for landing, appeared a blue line ... So far so good, but the green line to the airport should not have gone, right? In other route that did not happen .... but if it is normal, okay, I do not have much experience. Thanks for the answers Fernando Cesar https://skydrive.live.com/redir?resid=50A4D453BCA5CDB9!1703&authkey=!AB_U959sSYN4Kio Link to comment Share on other sites More sharing options...
KyleD 1027 Posted February 3, 2013 Share Posted February 3, 2013 I fly off line, with the default FSX ATC. So always expect ATC to inform airport runway landing. Normally even without selecting a track, the green line goes up to the airport. But these two routes I did today, that did not happen. When selected the runway for landing, appeared a blue line ... So far so good, but the green line to the airport should not have gone, right? In other route that did not happen .... but if it is normal, okay, I do not have much experience. Thanks for the answers Fernando Cesar https://skydrive.liv...AB_U959sSYN4Kio No worries Fernando, the blue line is actually the Missed Approach procedure route, and when you select an approach, that will appear and remain blue, until you either land, or until you perform a go-around (in that case once the go-around is initiated and you are passed the runway it will turn green as the now-active route). So, not to worry on that. Link to comment Share on other sites More sharing options...
Fernando Cesar 0 Posted February 3, 2013 Share Posted February 3, 2013 No worries Fernando, the blue line is actually the Missed Approach procedure route, and when you select an approach, that will appear and remain blue, until you either land, or until you perform a go-around (in that case once the go-around is initiated and you are passed the runway it will turn green as the now-active route). So, not to worry on that. Again thanks for the reply. I thought the green line should stay that way to the airport, if I do not select the runway for landing. https://skydrive.live.com/redir?resid=50A4D453BCA5CDB9!1704&authkey=!AHthcpvlP3gFse4 Fernando Cesar Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.