GMFM 0 Posted July 10, 2012 Share Posted July 10, 2012 Hi, In previous versions I encountered the problem that VoxATC would not show up. This situation was resolved by manually editing the "panel.cfg" Well, it seems that the problem may be back. In this occasion, VoxATC is able to configured itself into the "panel.cfg" but it fails to appear in the "Add-ons" (Ooops!) "Views" menus. I have also noticed that there are some ‘comments’ in some lines “Window63=Dialog // 7630”, which seem to refer to the “Ident= xxxx” on the corresponding “Window[xx]” below. Strangely, VoxATX ident’s number does not seem to follow the sequence, and neither would it work if changed. Any help is very much appreciated. My “panel.cfg” below: // DA20-100 Katana //------------------------------------------------------------------ [Window Titles] Window00=Main Panel Window02=Menu Bar Window20=Ground & Preflight > Ground Equipment // 7200 Window21=Ground & Preflight > Tow Bar // 7210 Window22=Ground & Preflight > Walkaround Check // 7220 Window23=Ground & Preflight > Trim Tabs // 7230 Window24=Ground & Preflight > Fuel // 7240 Window25=Ground & Preflight > Oil and Liquids // 7250 Window26=Ground & Preflight > Payload // 7260 Window27=Ground & Preflight > Cleaning // 7270 Window28=Ground & Preflight > Temperature Sensor // 7280 Window30=Maintenance > Aircraft and Equipment // 7300 Window31=Maintenance > Workshop // 7310 Window32=Maintenance > Service // 7320 window40=Instructor Panel > Systems Overview // 7400 window41=Instructor Panel > Engine and Fuel // 7410 window42=Instructor Panel > Electric // 7420 window43=Instructor Panel > Instruments and Avionics // 7430 window44=Instructor Panel > Systems and Faults // 7440 Window50=Settings > Settings // 7500 Window61=Initiation // 7610 Window62=Data Window // 7620 Window63=Dialog // 7630 ////<VoxATC Window64=VoxATC Window65=VoxATC Recent Comms ////>VoxATC ------------------------------------------------------------------------------------------------------------ [Windowxx] ------------------------------------------------------------------------------------------------------------ ////<VoxATC [Window64] visible=1 position=4 size_mm=400,200 pixel_size = 400, 200 background_color=0,0,0 ident=14077 zorder=5 alpha_blend=0.65 gauge00=VAGauge!VoxATCPrompt,0,0 [Window65] visible=0 position=5 size_mm=400,600 pixel_size = 400, 600 background_color=255,255,255 ident=14078 zorder=5 gauge00=VAInfo!VoxATCInfo,0,0,400,600 ////<VoxATC Link to comment Share on other sites More sharing options...
cbd80 258 Posted July 10, 2012 Share Posted July 10, 2012 Hi. VoxATC doesn't appear in 'Add Ons', it is accessed through the 'Views' menu and should appear as a cockpit view IIRC. Chris Link to comment Share on other sites More sharing options...
GMFM 0 Posted July 10, 2012 Author Share Posted July 10, 2012 Hi. VoxATC doesn't appear in 'Add Ons', it is accessed through the 'Views' menu and should appear as a cockpit view IIRC. Chris Stand corrected! Thank you. Still, no VoxATC as is on other aircrafts and was in previous versions of Katana 4X. Link to comment Share on other sites More sharing options...
CoolP 24 Posted July 11, 2012 Share Posted July 11, 2012 Can you try manually altering the window numbers for the two VoxATC entries? Currently, they are on 64 and 65. Perhaps assign 3 and 4 and try again. I recall having trouble with high 60+ values. Link to comment Share on other sites More sharing options...
GMFM 0 Posted July 11, 2012 Author Share Posted July 11, 2012 @ CooIP: Thank you, you hit the nail on the head. I just renumbered and tidy a bit, see below. Thank you! // DA20-100 Katana //------------------------------------------------------------------ [Window Titles] Window00=Main Panel Window02=Menu Bar ////<VoxATC Window04=VoxATC Window05=VoxATC Recent Comms ////>VoxATC Window20=Ground & Preflight > Ground Equipment // 7200 ------------------------------------------------------------------------ [Window00] file= size_mm=1280 window_size_ratio=1.000 position=7 visible=0 no_luminous=1 ident=MAIN_PANEL window_size= 1.000, 1.000 window_pos= 0.000, 0.000 zorder=0 [Window02] BACKGROUND_COLOR=1,1,1 size_mm=250,1000 window_size_ratio=1.000 windowsize_ratio=1.000 position=2 visible=1 no_luminous=1 ident=7000 zorder=5 alpha_blend=0.9 gauge00=MFDA20_GUI!ICNS-MAIN, 0, 0, 250, 1000 ////<VoxATC [Window04] visible=1 position=4 size_mm=400,200 pixel_size = 400, 200 background_color=0,0,0 ident=14077 zorder=5 alpha_blend=0.65 gauge00=VAGauge!VoxATCPrompt,0,0 [Window05] visible=0 position=5 size_mm=400,600 pixel_size = 400, 600 background_color=255,255,255 ident=14078 zorder=5 gauge00=VAInfo!VoxATCInfo,0,0,400,600 ////>VoxATC [Window20] BACKGROUND_COLOR=0,0,0 size_mm=1000,220 position=2 visible=0 no_luminous=1 ident=7200 zorder=5 alpha_blend=0.9 gauge00=MFDA20_GUI!GUID-GRND-FIXN, 0, 0, 1000, 220 Link to comment Share on other sites More sharing options...
CoolP 24 Posted July 11, 2012 Share Posted July 11, 2012 Sounds and looks good. Have fun talking to the ATC now. Link to comment Share on other sites More sharing options...
Recommended Posts