Xavier P 1 Posted September 17, 2011 Share Posted September 17, 2011 trying.... actually i think i have directx11 running do if i understand right, that option alone has to be unticked and i don't have to unistall directx 11 from pc to replace it by directx 9 (ouffff) Link to comment Share on other sites More sharing options...
nzeddy 14 Posted September 17, 2011 Share Posted September 17, 2011 do if i understand right, that option alone has to be unticked and i don't have to unistall directx 11 from pc to replace it by directx 9 (ouffff) Yup. I'm on Windows7 64bit and on DX11. FSX runs fine. Just untick DX10 in FSX and you should be sweet. Link to comment Share on other sites More sharing options...
Xavier P 1 Posted September 17, 2011 Share Posted September 17, 2011 thank you so much for this evening (early morning in brussels) support. I can now fully enjoy your scenery. sorry for being a noob with fsx. and thanks again for great scenery. if u need a serious beta tester for future eventual service update, let me know i ll be glad to help best regards xavier Link to comment Share on other sites More sharing options...
Xavier P 1 Posted September 17, 2011 Share Posted September 17, 2011 and thank you eddy for popping in and helping me out. i appreciate.... Link to comment Share on other sites More sharing options...
EmilG 239 Posted September 17, 2011 Share Posted September 17, 2011 thank you so much for this evening (early morning in brussels) support. I can now fully enjoy your scenery. sorry for being a noob with fsx. and thanks again for great scenery. if u need a serious beta tester for future eventual service update, let me know i ll be glad to help best regards xavier Welcome, enjoy Link to comment Share on other sites More sharing options...
nzeddy 14 Posted September 17, 2011 Share Posted September 17, 2011 No worries. Glad to help. Link to comment Share on other sites More sharing options...
Nick Farrington 5 Posted September 17, 2011 Share Posted September 17, 2011 Can we expect a FS9 version at any time please Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 18, 2011 Share Posted September 18, 2011 I have a strange problem when arriving to LGKR. For some reason the mesh doesn't seem to load correctly. Reloading the scenery fixes it but surly there must be a better solution. My settings I have HSP mesh installed on Scenery/world/scenery directory, but I tryied even with out it but nothing. Any ideas? Link to comment Share on other sites More sharing options...
EmilG 239 Posted September 18, 2011 Share Posted September 18, 2011 I have a strange problem when arriving to LGKR. For some reason the mesh doesn't seem to load correctly. Reloading the scenery fixes it but surly there must be a better solution. My settings I have HSP mesh installed on Scenery/world/scenery directory, but I tryied even with out it but nothing. Any ideas? Hi, Which FSX version are you currently using, and do you have FTX installed? Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 18, 2011 Share Posted September 18, 2011 Acceleration SP2, and YMML from Orbx Link to comment Share on other sites More sharing options...
nzeddy 14 Posted September 18, 2011 Share Posted September 18, 2011 I've got FTX installed and had no problems with the mesh or anything with CorfuX. Even when Australia or North America was activated with FTXCentral. Link to comment Share on other sites More sharing options...
KAPTEJNLN 237 Posted September 18, 2011 Share Posted September 18, 2011 Yes but he say he used HSP mesh whitch is some freeware terrain data for greece if im not mistaken. And said he tryeid whit out it (but if that means uninstaled or just a in the FSX it was disabled) but sorry i realy wanted to help if i could. but whit the settings it looks like in the manual 99% like the manual :-) Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 18, 2011 Share Posted September 18, 2011 HSP mesh has no isntaller. just 5 or 6 bgl which as I said tryied with out. Even if it was HSP mesh problem it wouldn't go away by just reloading the scenery. Link to comment Share on other sites More sharing options...
Piper9t3 2 Posted September 18, 2011 Share Posted September 18, 2011 Just installed Corfu X and I am not seeing the full details of this stunning scenery on my system?? My FSX scenery settings are as per suggested settings provided in the manual. I am running FSX in DX10 mode although there is no difference when i disable DX10. My Corfu Manager settings are all activated (with exception of Plane Spotting). My system info: Intel Core i7 2600k, EVGA Nvidia GeForce GTX580, 8GB Ram running FSX with Acceleration package. Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 18, 2011 Share Posted September 18, 2011 Did you activate the scenery from aerosoft activator? Link to comment Share on other sites More sharing options...
Piper9t3 2 Posted September 18, 2011 Share Posted September 18, 2011 Did you activate the scenery from aerosoft activator? I just activated the scenery and all works well now. Euxaristo !! Link to comment Share on other sites More sharing options...
Deputy Sheriffs Eric Bakker 736 Posted September 18, 2011 Deputy Sheriffs Share Posted September 18, 2011 I love Greek islands, and this is a very nice addition. Flying the Aerosoft Twin Otter with livery by Thomas Weiss. Link to comment Share on other sites More sharing options...
EmilG 239 Posted September 19, 2011 Share Posted September 19, 2011 Acceleration SP2, and YMML from Orbx The only time something similar was observed was due to 'errors' in FSX installation folders. I have tried to replicate your finding in all possible ways using my setup. The only way this was possible was by un-installing the SP2 pack and forcing FSX acceleration installation without allowing FS to rebuild its scenery index in between, which by the way should never be attempted. Therefore, I would firstly suggest to completely remove HSP mesh .bgl files (or have them put in a scenery folder in addon scenery for easy activation/de-activation). Then remove FSX acceleration and run FSX to allow it to rebuild its scenery files. Close it down and re-install FSX acceleration. Let me know how you re getting on to at least rule out this possibility. Link to comment Share on other sites More sharing options...
Emi 5161 Posted September 19, 2011 Share Posted September 19, 2011 I have a problem with my scenery: During the preview you've always said that the frames at Corfu X will be very good, but now I've flowen there with my NGX from Munich (Mega Airport). In EDDM I got about 20 fps and when approaching Corfu they drop to 10 or less!!! I can't fly that way! My system is: Intel I5 760 @2.8GHz nVidia GTX460 8GB RAM Win 7x64 I have those other addons installed in that area: Zante X and REX. FTX is deactivated (and also was deactivated during the installation of Corfu X). Link to comment Share on other sites More sharing options...
iPetroSS 542 Posted September 19, 2011 Share Posted September 19, 2011 Yes, unfortunately I confirm what Emi says. I usually get 17-20 fps with other sceneries like f.e FlyTampa' s Athens where I get 20+ fps! I tried eliminating the grass and some other elements but didn't notice any significant difference at all. I believe that there is a specific element in the scenery that causes the problem as when I taxi I get about 13 fps but when I approach my fps can go down to 7.... The fps drops instantly the moment the moment the airport comes into my point of view and especially the apron area. I hope this is something that can be fixed, it is a scenery that deserves the best My specs: Intel i7-930 2.8Ghz nVidia GeForce GTX480 1.5GB 6GB Gskill RAM and no lightbloom. Link to comment Share on other sites More sharing options...
nzeddy 14 Posted September 19, 2011 Share Posted September 19, 2011 My specs: Intel i7-930 2.8Ghz I would overclock that CPU to 4ghz with a good air cooler. Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 19, 2011 Share Posted September 19, 2011 The only time something similar was observed was due to 'errors' in FSX installation folders. I have tried to replicate your finding in all possible ways using my setup. The only way this was possible was by un-installing the SP2 pack and forcing FSX acceleration installation without allowing FS to rebuild its scenery index in between, which by the way should never be attempted. Therefore, I would firstly suggest to completely remove HSP mesh .bgl files (or have them put in a scenery folder in addon scenery for easy activation/de-activation). Then remove FSX acceleration and run FSX to allow it to rebuild its scenery files. Close it down and re-install FSX acceleration. Let me know how you re getting on to at least rule out this possibility. I will make the tests later today and will report back. Link to comment Share on other sites More sharing options...
EmilG 239 Posted September 19, 2011 Share Posted September 19, 2011 I have a problem with my scenery: During the preview you've always said that the frames at Corfu X will be very good, but now I've flowen there with my NGX from Munich (Mega Airport). In EDDM I got about 20 fps and when approaching Corfu they drop to 10 or less!!! I can't fly that way! My system is: Intel I5 760 @2.8GHz nVidia GTX460 8GB RAM Win 7x64 I have those other addons installed in that area: Zante X and REX. FTX is deactivated (and also was deactivated during the installation of Corfu X). Yes, unfortunately I confirm what Emi says. I usually get 17-20 fps with other sceneries like f.e FlyTampa' s Athens where I get 20+ fps! I tried eliminating the grass and some other elements but didn't notice any significant difference at all. I believe that there is a specific element in the scenery that causes the problem as when I taxi I get about 13 fps but when I approach my fps can go down to 7.... The fps drops instantly the moment the moment the airport comes into my point of view and especially the apron area. I hope this is something that can be fixed, it is a scenery that deserves the best My specs: Intel i7-930 2.8Ghz nVidia GeForce GTX480 1.5GB 6GB Gskill RAM and no lightbloom. The truth is that we have never came across such low FPS, not even during testing in dual core systems. That said, each setup is different so I d like to see what display settings (i.e. scenery/autogen density, water, AI traffic etc.) and which FSX versions you use. Link to comment Share on other sites More sharing options...
Cmakris 18 Posted September 19, 2011 Share Posted September 19, 2011 Unfortunately no Joy. Same issue even with unistalling running FSX reinstalling Acceleration. Link to comment Share on other sites More sharing options...
iPetroSS 542 Posted September 19, 2011 Share Posted September 19, 2011 I have FSX SP2 installed. Here are my settings: I must say that I have tried lower settings than these f.e lower AI but still not much improvement. The scenery is still fine, I just want to make it more easy to use Sorry to bother you Emilie...! Link to comment Share on other sites More sharing options...
Recommended Posts