Flyboy0284 21 Posted May 31, 2011 Share Posted May 31, 2011 Just updated my copy of Nice X to the latest version. I'm not sure if it is a problem with the scenery or AES, but the jetways are not appearing and there are floating flashing yellow lights moving around the airport. I have tried the repair/refresh button in AES without any success. Any ideas? Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted June 1, 2011 Share Posted June 1, 2011 Just updated my copy of Nice X to the latest version. I'm not sure if it is a problem with the scenery or AES, but the jetways are not appearing and there are floating flashing yellow lights moving around the airport. I have tried the repair/refresh button in AES without any success. Any ideas? Have you checked your scenery density setting to see if its at Max. Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 2, 2011 Author Share Posted June 2, 2011 Have you checked your scenery density setting to see if its at Max. I think the problem is with AES. When I disable AES the jetways reappear. With AES enabled all i get displayed are the stairs attached to the jetway and the rubber canopy. Link to comment Share on other sites More sharing options...
wingnut 60 Posted June 2, 2011 Share Posted June 2, 2011 Hello; In the AES Help program,under the AES airports,make sure that the above mentioned airport is activated for the Full mode. Mark Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 2, 2011 Author Share Posted June 2, 2011 Hello; In the AES Help program,under the AES airports,make sure that the above mentioned airport is activated for the Full mode. Mark AES is activated in full mode. I set all my sliders to max to see if that helps, but still no jetways. It seems as if my copy of AES is missing the object files for the jetways. Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted June 2, 2011 Share Posted June 2, 2011 AES is activated in full mode. I set all my sliders to max to see if that helps, but still no jetways. It seems as if my copy of AES is missing the object files for the jetways. Did you try the Repair/Resync in AES. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted June 2, 2011 Developer Share Posted June 2, 2011 AES is activated in full mode. I set all my sliders to max to see if that helps, but still no jetways. It seems as if my copy of AES is missing the object files for the jetways. Can you please post you AES Support ID please (AEShelp->Support->Generate Support ID, then paste here with Ctrl+V) Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 5, 2011 Author Share Posted June 5, 2011 Can you please post you AES Support ID please (AEShelp->Support->Generate Support ID, then paste here with Ctrl+V) F9DCEC41C4D6EB01F1DCEC41BD6FED41078EEC41EFDCEC41C2DC280760E5 I have tried the repair/refresh button without success. Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted June 5, 2011 Share Posted June 5, 2011 F9DCEC41C4D6EB01F1DCEC41BD6FED41078EEC41EFDCEC41C2DC280760E5 I have tried the repair/refresh button without success. Can you open AES then go to thesupport Tab and then press the "Generate Support Log File". Then please send that as an attachment to support@aerosoft.com Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 5, 2011 Author Share Posted June 5, 2011 Can you open AES then go to thesupport Tab and then press the "Generate Support Log File". Then please send that as an attachment to support@aerosoft.com OK, I sent it Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted June 6, 2011 Developer Share Posted June 6, 2011 Ok, please first check, that you don't have autogen = Off, as you can read here Then check, if you found a "AES-LFMN-ASI.BGL" file in the Nice X SCENERY Subdirectory Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 6, 2011 Author Share Posted June 6, 2011 Ok, please first check, that you don't have autogen = Off, as you can read here Then check, if you found a "AES-LFMN-ASI.BGL" file in the Nice X SCENERY Subdirectory Oliver, My autogen is set to normal. The file AES-LFMN-ASI.BGL is present. Link to comment Share on other sites More sharing options...
wingnut 60 Posted June 7, 2011 Share Posted June 7, 2011 Hello; I just went to the airport,and when I was at the gate,it took a couple of seconds for the jetways to appear,how long did you wait. mark Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted June 7, 2011 Developer Share Posted June 7, 2011 Is it possible, that you have the "DX10 Previewmode" activated? If so, please switch it off. Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 7, 2011 Author Share Posted June 7, 2011 Is it possible, that you have the "DX10 Previewmode" activated? If so, please switch it off. Oliver - I have DX10 preview off both in the sim and in the Nice X settings. I also uninstalled and re-installed both AES and Nice X but still have the same problem. All other AES airports are working fine. Mark - I sat on the tarmac for almost 30 minutes. Link to comment Share on other sites More sharing options...
Developer OPabst 2091 Posted June 7, 2011 Developer Share Posted June 7, 2011 I have checked the versions too, Get no issue here. Looks like your pc don't Get the Objects of the Lib file, the parts you See are the aes internal Parts. Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 8, 2011 Author Share Posted June 8, 2011 I have checked the versions too, Get no issue here. Looks like your pc don't Get the Objects of the Lib file, the parts you See are the aes internal Parts. Oliver, could you maybe send me the LIB file you are using via e-mail? I think I may have a bad file as it seems unusually small (93kb) . Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted June 15, 2011 Author Share Posted June 15, 2011 Oliver, could you maybe send me the LIB file you are using via e-mail? I think I may have a bad file as it seems unusually small (93kb) . Anyone have any other suggestions? Link to comment Share on other sites More sharing options...
Flyboy0284 21 Posted July 12, 2011 Author Share Posted July 12, 2011 Anyone have any other suggestions? Looks like updating to AES 2.12 fixed my issues at Nice :-) Link to comment Share on other sites More sharing options...
Recommended Posts