stumar 4 Posted September 2, 2010 Share Posted September 2, 2010 Hello folks My auto thrust is not working atall, During takeoff the engines will never reach the TOGA or FLEX thrust dictated to them i managed only about 85% during a FLX takeoff when i should have had 98%. when in the air the engines will also not reach the CLB thrust they are commanded to. As i write this im trying to climb to FL230, the FMA is in SPEED (green) CLB (green) ALT(blue) NAV(Green). The ECAM upper shows CLB (96.2%) but the engines are steady at 77%. Throttles are both in the climb detente A/THR on the glareshield is selected (green light on). Regards Stuart Link to comment Share on other sites More sharing options...
stumar 4 Posted September 2, 2010 Author Share Posted September 2, 2010 Performed another takeoff, this time using full TOGA, engines only achieved 72% as apposed to the commanded 104%, this was also without the weather programme ASE, just to see it it was that that was interfering. Airbus X is confined to the "pending" addon bin for now, very sad. Regards Stuart Link to comment Share on other sites More sharing options...
TB10 Driver 17 Posted September 2, 2010 Share Posted September 2, 2010 Performed another takeoff, this time using full TOGA, engines only achieved 72% as apposed to the commanded 104%, this was also without the weather programme ASE, just to see it it was that that was interfering. Airbus X is confined to the "pending" addon bin for now, very sad. Regards Stuart Stuart, Have you followed the FAQ and docs for setting up/configuring the throttles? http://www.forum.aerosoft.com/index.php?showtopic=37798 I assume (which I should not do) that you're using a physical throttle hardware, ie Saitek, CH Products, etc? Bob Link to comment Share on other sites More sharing options...
Recommended Posts